Exhausts/Headers
9 Item(s)
Grid List
-
B16 Sentra 2.5L Catback Exhaust (2007-2012)
Regular Price: $779.00
Special Price $689.98
Step up your power goals with a hand-made, tig welded, catback exhaust from 2JR for for your 07-12 Nissan Sentra. Specifically designed for the Second Gen QR25 B16 Chassis (Sentra), this is the best exhaust system available. Made from stainless steel and available in either a 2.5 (quietest) or 3.0 piping size. We use Magnaflow resonators and mufflers with a resonated carbon fiber tip. Bolts to the OEM midpipe for 2.5 systems. You must use the 2JR 3" midpipe for the 3" catback version. Sounds amazing with the 2JR MB16 Medusa Header, Midpipe and 2.5" catback. Huge power increases, deep - clean sound without rasp. Learn More -
2JR B16 SpecV Midpipe - 70mm Stainless
Regular Price: $249.99
Special Price $194.98
2JR Stainless 70mm Midpipe for the B16 SpecV - fits the MB16 Header as well as the stock header (or any aftermarket header for the B16 SpecV). Made from 304 Stainless Steel with a flex section for long life during hard launches at the track. Step up from the OEM 2" midpipe to a 70mm midpipe from 2JR. Learn More -
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L)
Regular Price: $579.99
Special Price $429.78
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L) Application - Header Only 2007 - 2012 2.5L Nissan Sentra 2007 - 2019 2.5L NIssan Altima (coupe and sedan) Application - Midpipe 2007 - 2012 2.5L Nissan Sentra (only) Midpipe will not fit Altima Coupe or Sedan The wait is finally over! The Medusa MB16 header is here!. Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The MB16 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Slim fans and ACB ARE NOT required for fitment. Simply install and enjoy the performance and rumble from your Lt Ed MB16 Medusa. Made from 304SS Stainless. Bolts directly to your factory midpipe or step up to the 2JR 70mm Stainless Midpipe for even more power and roar! Learn More -
ARP Stainless Steel Exhaust Stud Kit
Regular Price: $126.98
Special Price $116.78
ARP Stainless Steel Exhaust Stud Kit ARP stainless steel accessory studs can be used for exhaust systems, intake manifolds, and a number of other uses. They are made of ARP's stainless 300 and are impervious to the rust and corrosion that plague ordinary fasteners. The studs feature a unique nut starter nose and a hex broached tip, allowing them to be easily installed using an Allen wrench. Stainless steel 12-point nuts and washers are included. Give your engine a show quality look with ARP stainless steel accessory bolts. Perfect for Nissan or Toyota Exhaust and Turbo Manifolds Product: 12-Point, M10 x 1.25 1.90" Length Set of 8 Learn More -
Aluminum (ACB+) Heavy Duty Alternator Clearance Bracket (B15 and B16)
Regular Price: $99.99
Special Price $79.99
ACB+ Made from Aluminum for extra long life and durability. Alternator clearance bracket allows you to remove your header without having to remove your alternator. Adds over 2" of clearance. Keeps the alternator somewhat cooler as well. Includes hardware and threaded ends. You must check for clearance between the ACB and the alternator bracket on the engine - and add a washer if necessary. Learn More -
2JR Nissan/Toyota CNC Stainless Header Stud Kit
Regular Price: $119.87
Special Price $86.11
2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
02 Sensor 90° Catted De-fouler - Stainless Steel
Regular Price: $35.00
Special Price $26.00
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
02 Sensor De-Fouler - Stainless Steel
Regular Price: $17.99
Special Price $12.99
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More
9 Item(s)
Grid List