Suspension / Steering
8 Item(s)
Grid List
-
Nissan 55mm Full Race Wheel Studs - fits all models
Regular Price: $5.25
Special Price $3.68
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 25mm of increased track width per side. 55mm, Forged Chromoly SCM435. Also available in 82mm SOLD AS EACH $59 for pack of 16. Learn More -
2JR Billet Wheel Spacers with optional Forged Studs / Lugs
Regular Price: $39.99
Special Price $17.98
2JR wheel spacers give your car improved roll center and better stance. Made from billet 6061, our hub centric come with 67.1mm center bore to fit all Nissans. 10mm is not recommended for the rear of the b15 chassis due to the length of the hub. Double drilled 4x114.3 AND 5x114.3. By adding track width, we dropped our laptimes at Road Atlanta by almost 2 secs. We also saw improved tire wear. All +5mm spacers are hubcentric for perfect fitment - you don't need to add studs other than stock studs. 2JR 55mm studs are required for the 15mm spacers and 82mm studs are suggested for the 20mm spacers. Open Lugs are not required; however, for a race-look add the 2JR forged chromoly Black lug open lug nuts. Solid, built for life - used on our race car. Sold as a pair. Learn More -
Nissan 82mm Full Race Wheel Studs (fits all models)
Regular Price: $5.99
Special Price $4.25
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 40mm of increased track width. There hasnt been a 12x1.25 with the correct knurl for a Nissan until now. 82mm, Forged Chromoly SCM435. SOLD AS EACH Learn More -
2JR Forged Chromoly Lug Nut - BLACK
Regular Price: $159.99
Special Price $79.99
2JR Releases its new line of Forged Solid Chromoly Lug Nuts for Nissan / Subaru bolt patterns (12x1.25mm) - 35mm Length, Open End, with Knurled Ends for easy grip while installing at the track or street. These are made from billet chromoly for extra long life and durability without the high cost of our Ti lugs at 1/2 the cost. Color is powdercoated black with gold 2JR logo.
-
BC Racing Custom Spec'd Coilovers
Regular Price: $1,250.00
Special Price $1,247.98
Finally, the best coilovers on the market are now available through 2JRacing with custom spring rates and valving to match. No more oversprung/under-dampened coilovers that exude a bouncy ride. BC Racing coilovers provide the perfect balance of handling and performance without being stiff. 4.5 years of racing on our original set with zero leaks or issues. Extremely durable and quiet. Customize your choices to match your driving style and level of performance. Available for a number of performance vehicles (Nissan / Ford / Etc) AVAILABLE MODELS - CHECK HERE: http://www.bcracing-na.com/wp-content/uploads/2014/07/BC-application-list-2014.pdf Ships for $9.89 in the lower 48 states Learn More -
TEIN Springs - S.Tech Spring Kit - B16 Sentra (07-12)
Regular Price: $280.00
Special Price $249.99
TEIN Springs - STech: TEIN S.TECH Spring is an excellent step towards suspension tuning. For B16 (2007-2012) Sentra. FITS ALL MODELS They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects. *Features* * One year limited warranty * High-grade material adapted to improve guaranteed satisfaction * Rubber spring protector sheet to prevent noise (most applications) Ride Height (F): -1.3in (-34mm) Spring Rate (R): 269lbs/in (4.8kgf/mm) Ride Height (R): -1.1in (-29mm) Spring Rate (F): 168lbs/in (3kgf/mm) Learn More -
H&R 07-12 Nissan Altima Sport Spring
Regular Price: $439.78
Special Price $329.78
Fitment Information Nissan Altima Coupe/Sedan 4 Cyl/6 Cyl (2007, 2008, 2009, 2010, 2011, 2012 ) Specs & Features Coupe: Lowers 1.2" Front and 1.2" Rear Sedan: Lowers 1.5" Front and 1.2" Rear Includes all lowering springs Works with factory shocks or aftermarket shocks that fit stock springs. H&R Sport Springs offer superb ride quality and are H&R's number one selling product. These lowering springs offer some of the best ride characteristics of any lowering spring and offer enhanced handling while giving your car just the right amount of lowering to close the fender gap. H&R Sport lowering springs lower the vehicle center of gravity and reduce body roll for incredible handling improvements. H&R Sport springs are progressive rate and work fantastic with aftermarket, factory or performance shocks. On older vehicles we do recommend to upgrade the shocks at the same time. Includes all 4 springs for a complete setup. Learn More -
Swift Spring Upgrade
Regular Price: $399.98
Special Price $380.00
Swift Spring Upgrade Includes 4 springs (Pair Front / Pair Rear) Contact 2JRacing after your order to confirm spring rates and chassis Upgrade your current coilovers to Swift springs. These Swift springs will fit most coilovers that use a 62mm or 65mm spring. Most brands of coilovers will use one of those common Inner diameter springs. Learn More
8 Item(s)
Grid List