2019+ Corolla 2.0L
2023 Hatchbacks have the same OEM Lower Bumper Trim as the 19-22. All 2JR catbacks/bash bars/Greddy/HKS/Borlas will fit 2023 Hatches.
-
2019-2022 Corolla 2.0L Cold Air Intake
Regular Price: $309.99
Special Price $239.98
Fits: E210 Sedan and Hatch 19-22 Gains - 15whp / 11wtq 2JR introduces a true cold air intake for the 2.0L 19-22 Corolla (hatchback and sedan) with a 4db increase in induction noise. We place the filter behind the front bumper for the coldest ambient air while being protected from rain/water and the elements and add a taper to increase air flow. Includes High Flow filter and optional filter sock. You will need to trim your plastic radiator core trim panel. Additionally -93 oct is preferred for the best performance. NOTE: This intake pulls in a lot of air due to its design and location. We recommend never running in ECO mode. After install, reset the ECU by disconnecting the battery for 5min. Let the car idle for 5min then drive normal for 30min before smashing! Install time - 60min. 3" Piping with tapered section for increased flow. NOTE: All hoses, clamps and filter are included in the kit. TEMPLATE - download for cutting the plastic trim https://1drv.ms/u/s!AjQkUN52fS1SkZFgc11s4QKniNaBbQ Does not fit 2023 Corolla. Learn More -
(Hatch) Race Side Exit Catback Exhaust
(Hatch) Race Side Exit Catback Exhaust Weighs under 10lbs! Designed for track use with hard chassis mount w/isolator and sits tucked up high for extreme low E210s. Options include Full Race without a Resonator and stainless tip style - oval 2.5" and NASCAR 10" Boom Tube. Exhaust is full stainless steel for long life. Refer to the attached photo for install tips! Specs: 2.5" 304SS with Flex Race Spec Resonator (optional) Hard Chassis Mount with Rubber Isolator Stainless 10" Exit with Slats (optional) Stainless 2.5" Oval Exit (optional) Bolts directly to OEM Midpipe or 2JR Midpipe No cutting or Fab work required Note: You must remove the heat shielding and plastic where the exhaust routes. This easily unbolts from the chassis. Heat Shielding around the gas tank remains. Learn More -
2JR Greddy Revolution Catback (Hatch)
Regular Price: $899.98
Special Price $859.78
2JR Greddy Revolution Catback (Hatch) Are you looking for a supremely bad ass Greddy Revolution Catback for your E210 Hatch - Then is one is for you. Custom built and hand tig welded only using the highest quality stainless piping and flanges. Greddy Revolution Muffler. You can choose which side you want the exhaust to exit on - Driver or Pass. Add a resonator in the options to tone things down a bit. And pair it up with the 2JR Midpipe for the most aggressive performance and sound or the OEM midpipe. Options for style include: OEM Bumper with the Chrome Trim Removed OEM Bumper with Diffuser 2JR Bash Bar with "JDM Angle" on the Greddy Learn More -
Corolla Sedan Apex Carbon Catback (Quad)
Regular Price: $899.98
Special Price $749.98
Released in limited quantities, a Quad Carbon Catback is now available for your E210 sedan. No rasp, just deep, clean sound and big performance gains. Stand out from the crowd. Built with only the best parts available - including twin Vibrant Ultra Quiet Mufflers, 2.5" Stainless Steel piping and integrated flex section. Designed to fit your OEM or 2JR Midpipe (inc the 2JR Header). Fits to the OEM Corolla Midpipe or 2JR Midpipe and Header for the most power, sound and performance. NOTE: YOU MUST TRIM YOUR BUMPER TO FIT ON THE DR SIDE. REMOVE THE OEM REAR HANGER (pass side) AND RUBBER GROMMETS (dr side) IN THE FRAME RAIL. USE THE INC'D 2JR BOX HANGERS AND 10x1.25 FINE THREAD BOLTS IN THE FRAME RAILS TO HOLD THE BOX HANGERS IN PLACE. Threaded holes exist in these locations. DO NOT USE THE 10x1.5 BOLTS IN THE FRAME RAILS Features: Twin Vibrant Mufflers 2JR Quad Carbon Tips (Slash w/Logo) Stainless Piping with Flex Section E210 Sedan ONLY - fits Manual and CVT Learn More -
aFe Corolla Takeda Momentum Cold Air Intake System w/ Pro 5R Media
Regular Price: $364.98
Special Price $349.78
aFe Corolla Takeda Momentum Cold Air Intake System w/ Pro 5R Media Fits sedan and hatchback 2.0L This 7-1/2” tall 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing is constructed of heat-resistant cross-linked polyethylene (XLPE). On Backorder until October Learn More -
E210 Sedan Magnaflow Carbon Catback Exhaust
Regular Price: $729.98
Special Price $679.89
E210 Sedan Magnaflow Carbon Catback Exhaust Are you looking for a supremely bad ass Magnaflow Catback for your E210 sedan? Full 2.5" Stainless Steel? Then is one is for you. Custom built and hand tig welded only using the highest quality stainless piping and flanges. Fits to the OEM Corolla Midpipe or 2JR Midpipe and Header for the most power, sound and performance. Features: Magnaflow Muffler 2JR Carbon Resonated Tip (Blue/Gold) Stainless Piping with Flex Section E210 Sedan ONLY - Manual or CVT fits Learn More -
2JR Titanium Greddy/HKS Catback (Hatch)
Regular Price: $1,249.98
Special Price $929.98
2JR Titanium Greddy/HKS Catback (Hatch) Greddy or HKS Titanium Catback for your E210 Hatch are now available for custom order! Built to your specs, hand tig welded only using the highest quality stainless piping and flanges. Greddy Revolution Muffler. You can choose which side you want the exhaust to exit on - Driver or Pass. Add a resonator in the options to tone things down a bit. And pair it up with the 2JR Midpipe for the most aggressive performance and sound or the OEM midpipe. Options for style include: OEM Bumper with the Chrome Trim Removed OEM Bumper with Diffuser 2JR Bash Bar with "JDM Angle" on the Greddy Learn More -
E210 Polished Header (PRE ORDER)
Regular Price: $699.00
Special Price $499.78
E210 Polished Header (PRE ORDER) Save $200 off ($629 regular price) Ships on/near Sept 30, 2023 - Limited to 15 headers in this batch 2019+ Corolla Long Runner Header - Polished Stainless Fits Sedans/Hatchback 2.0L Only UEL Design / Stainless Steel with EGR Port. Incredible power gains, amazing sound ! It comes complete ready to drop in, no modification required. Fits on the OEM midpipe or 2JR Midpipe. Learn More -
Quiet Quad Carbon Borla Stainless Catback (Hatch)
Regular Price: $1,049.99
Special Price $949.78
Quiet Quad Carbon Borla Stainless Catback (Hatch) The quietest 2.5" Catback available for the Hatch in full 2.5" Stainless with Quad Carbon Rear Tips. No drone, no rasp - just clean deep Borla sound. Designed to fit either your factory bumper with the chrome tips removed or the rear diffuser. Specs: 2.5" Full Stainless w/ Flex Section Massive Borla XS Power Large Camber Muffler Quad Carbon Tips V-Band Flange for perfect fitment / alignment Hard Hanger option recommended Learn More -
Race Center Exit (Loud) w/ Bash Bar
Regular Price: $1,299.98
Special Price $989.78
Race Center Exit (Loud) w/ Bash Bar Our Loudest Exhaust! We are offering 2 of our E210 Center Exit Catbacks with Bash Bar. Tip choices can be polished or Carbon Fiber. Optional choices in added the catted high power midpipe. These exhausts are designed to be loud, aggressive and unlike anything you've ever seen. Production time is approx 4 weeks. Bash Bar is included - however can be removed in the options (assuming you already have one) Learn More