B17 Sentra SR / Nismo Turbo
All returns are subject to a 20% restocking fee, for new unused parts - 30days from purchase.
-
B17 Sentra SR/ Nismo Cold Air Intake
Regular Price: $199.00
Special Price $159.78
Sentra SR/Nismo Cold Air Intake - B17 1.6L Turbo 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver large power gains. We also monitor fuel trim correction factors and all OBDII sensors during product development to eliminate leaning the engine out and/or throwing a check engine light. Available in two versions - Short Ram Version and the Full Cold Air Version. Available in Polished / Wrinkle Red / Gloss Black Colors will add 2 weeks Learn More -
OEM Nissan Clutch Kit (Juke / B17)
Regular Price: $1,279.98
Special Price $829.78
OEM Nissan Clutch Kit (Juke / B17) Application: Fits All Models Nissan Juke with MR16DDT (1.6L) Manual Fits All Models Nissan B17 Sentra SR / Nismo MR16DDT (1.6L) Manual OEM Part Numbers: 12310-3YV0A: $1,084.77 Flywheel 30100-1KCOA: $214.86 Disk 30210-1KC0C: $234.85 Pressure Plate OEM New Nissan Complete Clutch Kit. Includes Flywheel, Disk, Pressure Plate and Pressure Plate Bolts. Optional - OEM LUK Concentric Slave Unit Removed from New Nismo RS Engines. Learn More -
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC
Regular Price: $1,679.98
Special Price $1,498.78
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake 2JR Full FMIC with Hard Piping Kit Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake
Regular Price: $929.98
Special Price $879.78
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. Learn More -
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe
Regular Price: $798.89
Special Price $729.78
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe Includes: 2JR Carbon Catback 2JR Midpipe w/defouler Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Includes Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. Sound Clip Learn More -
B17 SR / Nismo Axle Back Exhaust - 2.5"
Regular Price: $229.00
Special Price $169.98
Axle Back Exhaust for the B17 Turbo - SR/Nismo Specs: 2.5" Stainless Steel with Resonated Carbon Blue/Gold Tip Includes bolts and gaskets Bolts on your OEM factory exhaust / No fabrication required Increases sound levels by 8-9db over stock 16lb weight savings 1 Week build time after order is placed Learn More -
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit
Regular Price: $899.00
Special Price $679.98
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Nissan B17 Sentra SR/Nismo Blow Off Valve Upgrade
Regular Price: $168.77
Special Price $142.54
Fits the GenII MR16DDT Engines - B17 Sentra Turbo Models THE SIMPLE & ESSENTIAL MOD FOR 30% QUICKER BOOST By retaining the factory ECU control and recirculating the vented air, the GFB BOV is a purely performance oriented product that offers the following benefits: Sharper throttle response Faster boost recovery on gearshift Solves boost leaking issues Built to last UTILIZING PROVEN TMS TECHNOLOGY TO ENSURE DEPENDABLE BOOST HOLDING AND OPTIMUM THROTTLE RESPONSE The T9362 is a fully recirculating direct factory replacement for the pneumatic diaphragm type BPV (Bypass Valve) used on Renault Cleo RS – when you want the performance WITHOUT the noise! Using GFB’s TMS technology it can help return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears Learn More -
B17 Sentra SR Turbo / Nismo Catch Can
Regular Price: $199.00
Special Price $159.00
2JR Complete Catch Can Kit for the B17 Turbo (all models). Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 4 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! https://fb.watch/aQ1zl1Ar1m/ Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -3 Color Options -Safe for Pressurized Applications Learn More -
2JR Sentra Turbo SR / Nismo 70mm Midpipe (20wtq / 15whp)
Regular Price: $299.99
Special Price $269.98
2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the Sentra SR Turbo and Nismo editions. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light because an 02 Spacer is built in to the midpipe! Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Fits all B17 Turbo Sentras Learn More