Drivetrain/Shifter - B17 Sentra SR / Nismo Turbo

LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90

Regular Price: $86.98

Special Price $78.97

LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Comes in a kit - 3L (3 1L Bottles) Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals. Used exclusively in Nissan, Toyota, Scion, Subaru Transmissions and Differentials where GL4/5 is required/recommended Learn More

Clutch Masters Nissan SR Sentra Turbo FX400 Sprung 6-Puck Ceramic Clutch Kit

Regular Price: $603.75

Special Price $523.75

Clutch Masters Nissan SR Sentra Turbo 6-Spd 1.6T FX400 HD PP Sprung 6-Puck Ceramic Clutch Kit FX400 Clutch Kit; Heavy Duty Pressure Plate; 6-Puck Ceramic Sprung Disc; Change Over Kit w/o Flywheel; Will Only Work w/ CM Flywheel Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More

Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo FX350 Clutch Kit

Regular Price: $603.75

Special Price $523.18

Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo FX350 Sprung Disc Clutch Kit Heavy duty pressure plate. Fiber Friction lined disc. Sprung disc. Upgrade kit, requires Clutch Masters flywheel (sold separately). Hydraulic slave cylinder included. The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs. Learn More

Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX100 Clutch Kit

Regular Price: $546.00

Special Price $465.11

Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX100 Clutch Kit Heavy duty pressure plate. Steel-backed Organic disc. Sprung disc. Upgrade kit, requires Clutch Masters flywheel (sold separately). Hydraulic slave cylinder included. MUST USE CM FLYWHEEL SOLD SEPARATELY *Features* * High performance street system * Holding capacity 70% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More

Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo 6-Speed Single Piece Steel Flywheel

Regular Price: $525.00

Special Price $462.77

Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo 6-Speed Single Piece Steel Flywheel Part Number: cmFW-178-SF Description: Lightweight Steel Flywheel Weight: 23lbs *Going from a Dual-Mass Flywheel (DMF) to a Single-Mass Flywheel (SMF):* A Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF. Many times enthusiast choose to replace a DMF with an SMF and here is why: * DMF’s tend to be more expensive than an SMF. * DMF’s are not designed to be resurfaced like conventional SMF. * DMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag. * DMF’s cannot withstand a high rate of abuse and may fail under spirited driving. *Benefits of switching to a SMF:* * Reduced mass equals increased acceleration. * Reduces turbo “lag” in turbo-charged engines. * Increased supercharger efficiency due to less drag on the crank. * Improved mid-range torque in naturally aspirated engines. * SMF's are able to be resurfaced and can be reused. Learn More

Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX250 Clutch Kit

Regular Price: $577.50

Special Price $498.78

Clutch Masters 11-14 Nissan Juke 1.6L FX250 Clutch Kit Organic Fiber Tough Sprung Disc The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More

SR/Nismo Stage I Clutch and Forged Flywheel - OEM Stock Upgrade (325hp)

Regular Price: $679.00

Special Price $629.78

Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit SR / Nismo Sentra - All Years (MR16DDT), only Turbo Models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325hp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. Optional LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Learn More

OEM Nissan Factory Nismo RS Clutch Kit (Juke / B17)

Regular Price: $1,279.98

Special Price $829.78

OEM Nissan Clutch Kit (Juke / B17) Application: Fits All Models Nissan Juke with MR16DDT (1.6L) Manual Fits All Models Nissan B17 Sentra SR / Nismo MR16DDT (1.6L) Manual OEM Part Numbers: 12310-3YV0A: $1,084.77 Flywheel 30100-1KCOA: $214.86 Disk 30210-1KC0C: $234.85 Pressure Plate OEM New Nissan Complete Clutch Kit. Includes Flywheel, Disk, Pressure Plate and Pressure Plate Bolts. Optional - OEM LUK Concentric Slave Unit Removed from New Nismo RS Engines. Learn More