2JR Siemens/Deka 633cc Injectors (also for JWT Turbo Reflash)

Be the first to review this product

Availability: In stock

$249.99

Quick Overview

The best injector for your boosted B15. For HP up to 360whp, and specifically tuned for JWT's 02-03 Turbo Reflash. Dont settle for inferior redrilled injectors (deatschwerks). These are genuine, reliable siemens Injectors with excellent response characteristics. These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI. A perfect match for nearly all B15 turbo applications.

Choose the direct fit connectors for no splicing to your stock wiring harness. Just plug and play!

2JR Siemens/Deka 633cc Injectors (also for JWT Turbo Reflash)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

$249.99

Details

These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI. In addition, these units are high-impedance.This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with Nissan ECUs, while delivering the most flow available in a High-Impedance injector. These injectors are able to function at high fuel pressures and don't exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. These High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow. Specifications: Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required) Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.