Search results for: '04'

UpRev MAF GT

Regular Price: $399.98

Special Price $379.98

UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More

Garrett GT3076R Turbo

Regular Price: $1,725.98

Special Price $1,695.98

Garrett GT3076R Ported Shroud T04E 4" CompHsg + T3 .82 A/R Turbine Hsg w/ T31 (Narrow) 4 Bolt Exit PRODUCT DESCRIPTION: This is a full size GT3076R turbo with the 60mm Turbine and 76mm compressor wheel set up in the T3 Turbine housing and the native (T04E Frame) Compressor Housing with a Ported Shroud (Anti-Surge), 4” inlet and 2” outlet. Garrett GT3076R ball bearing turbocharger and the popular .82 A/R - T31 4 bolt Turbine Housing (Undivided Entry T3 .82 A/R Turbine Housing with the “Narrow” 4 bolt exit). 525+HP potential flow. The larger 60mm turbine wheel compliments the 76mm compressor to make power without compromise. PRODUCT FEATURES: Genuine Garrett GT Aero compressor wheel Genuine Garrett GT Inconel turbine wheel Dual ball bearing CHRA rotating assembly Compressor Wheel Inducer: 57mm / Compressor Wheel Exducer: 76mm / Compressor Wheel Trim: 56 / Compressor Housing A/R: 0.60 / Turbine Wheel Inducer: 60mm / Turbine Wheel Exducer: 55mm / Turbine Wheel Trim: 84 Learn More

QR25 Upper Oil Pan - Turbo Drain

Regular Price: $299.99

Special Price $279.89

QR25 Upper Oil Pan - Turbo Drain We now offer a new OEM upper oil pan for the QR25 with a drilled, tapped and tig welded 10an oil drain, Inc a block off cap if you're not turbo yet. No more leaks. Approx 1-2 weeks from date order is placed. Subject to parts availability from Nissan. Pan's do not include baffle plate. They are as shown in the photo. You can also send in your pan for this service. The cost is $135 and includes the fittings. Shipping costs paid when you check out will be used to return your pan. Ship to the address below with your order receipt in the box. OEM B15 Pan: Nissan 11110-3Z000 (2002-2006) OEM B16 Pan: Nissan 11110-ET80A (2007-2012) < new OEM pan is +300 from Nissan Ship to: 2JRacing 1685 Redi Rd Cumming GA 30040 Learn More

PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"

2 Review(s) | Add Your Review

Regular Price: $299.98

Special Price $239.78

Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING
Learn More

QR25DE Turbo Manifold (all years) - T3

2 Review(s) | Add Your Review

Regular Price: $599.99

Special Price $399.99

2JR is proud to release our 304 Stainless top-mount turbo manifold for all QR-series powered Nissans. Engineered for maximum efficiency while maintaining 2JR’s legendary reliability, this manifold will spool faster, last longer and produce more reliable power across the entire RPM range than any other manifold on the market. Designed for compact fitments and high power EFR compatibility, the flange is a T3. Fits all QR25DE Engines 100% Handmade from high grade thickwall 304 stainless steel Specifically designed Internal WG turbos - you can add a WG port to the side for External Sealing surfaces machined flat ensuring a leak free seal T3 Flange Learn More

2JR Nissan/Toyota CNC Stainless Header Stud Kit

3 Review(s) | Add Your Review

Regular Price: $119.87

Special Price $86.11

2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More