Search results for: 'nissan versa'

UpRev MAF GT

Regular Price: $399.98

Special Price $379.98

UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More

BorgWarner EFR 6258 Turbo

Regular Price: $1,564.78

Special Price $1,199.78

Out of stock

BorgWarner EFR 6258 Turbo BorgWarner EFR 6258 is the fastest Spooling EFR Turbo.. Ideal for small engines (2.5L) in single OR twin turbo configuration, this is an excellent turbocharger for autocross, rally, drift, road racing and street driven applications. A direct plug-n-play for SR20DET, its also popular for Subaru WRX and Nissan Sentra SpecVs. The 62mm OD compressor has a 49.6mm inducer rated at 44lb/min max flow – supporting up to 440hp. This compressor wheel is versatile with very large map width for outstanding power potential, even at high boost. The low inertia 58mm Gamma-Ti turbine wheel is optimally matched for maximum response and fast spool with the FMW compressor wheel. EFR 6258 uses the smallest-sized EFR compressor housing, making fitment in the tightest engine bays possible. Ideal for use in single turbo applications for the 260-440hp range, or as twin turbo applications 500-800+hp. Ceramic Ball Bearing only, watercooling recommended but not mandatory. COMPRESSOR SPECIFICATIONS Compressor Type: Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 62mm Compressor Wheel Inducer: 49.6mm Max Flow Rate: 44 lb/min Built-in BOV: All EFR compressor housings incorporate an integrated BOV. Compressor Housing: 2.5″ inlet, 2.0″ hose coupler outlet. TURBINE SPECIFICATIONS Turbine Wheel Material: Low Inertia Gamma-Ti Turbine Wheel Turbine Wheel OD: 58mm (recommended) OR 55mm Turbine Housing Material: Stainless Steel Sand Cast Housing Turbine outlet: GT-Vband (aka small 3″ vband) ~92mm OD for all EFR turbos FEATURES Dual Row Ceramic Ball Bearings – lowest friction and fastest spool/response, most extreme durability, built-in 2mm oil restrictor Watercooled Center Section – watercooling is recommended, 14mm banjo bolts Learn More

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 4)

Regular Price: $546.00

Special Price $529.78

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 4) Direct fit on your 2002 and up Nissan The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference. Learn More

QR25 Upper Oil Pan - Turbo Drain

Regular Price: $299.99

Special Price $279.89

QR25 Upper Oil Pan - Turbo Drain We now offer a new OEM upper oil pan for the QR25 with a drilled, tapped and tig welded 10an oil drain, Inc a block off cap if you're not turbo yet. No more leaks. Approx 1-2 weeks from date order is placed. Subject to parts availability from Nissan. Pan's do not include baffle plate. They are as shown in the photo. You can also send in your pan for this service. The cost is $135 and includes the fittings. Shipping costs paid when you check out will be used to return your pan. Ship to the address below with your order receipt in the box. OEM B15 Pan: Nissan 11110-3Z000 (2002-2006) OEM B16 Pan: Nissan 11110-ET80A (2007-2012) < new OEM pan is +300 from Nissan Ship to: 2JRacing 1685 Redi Rd Cumming GA 30040 Learn More

PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"

2 Review(s) | Add Your Review

Regular Price: $299.98

Special Price $239.78

Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING
Learn More

2JR Nissan/Toyota CNC Stainless Header Stud Kit

3 Review(s) | Add Your Review

Regular Price: $119.87

Special Price $86.11

2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More

Direct Fit - Bosch Motorsports Injector Set -300-650whp (Nissan Denso)

Regular Price: $349.00

Special Price $279.99

2JR is proud to offer Bosch Motorsports injectors for your Nissan. Direct fitment with Denso Clip, no cutting or splicing of your stock harness. Extremely excellent at low speed for a stable and solid idle. Same height as stock and offers a dual spray pattern for less wall-wash - direct to port spray pattern. Easily Tunable. Same injectors used in our 600whp Turbo kits Go with the best injectors for your Nissan - go with Bosch Motorsports from 2JR Sizes available 440CC 850CC 1000CC 1450CC Learn More

2JR Siemens/Deka 633cc Injectors (also for JWT Turbo Reflash)

$249.99

The best injector for your boosted B15. For HP up to 360whp, and specifically tuned for JWT's 02-03 Turbo Reflash. Dont settle for inferior redrilled injectors (deatschwerks). These are genuine, reliable siemens Injectors with excellent response characteristics. These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI. A perfect match for nearly all B15 turbo applications. Choose the direct fit connectors for no splicing to your stock wiring harness. Just plug and play! Learn More

HKS Universal SSQV4 BOV

Regular Price: $295.98

Special Price $279.78

HKS Universal SSQV4 BOV HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. This Super SQV maximizes the charge-response that repeats pressure-charging and pressurized air relief by throttle on and off and supports new generations of turbocharged vehicles. Factory recirculation valve sound cannot be noticed, but once HKS Super SQV IV is installed, its unique & sharp high frequency sound demonstrates its existence. Super SQV IV significantly increases its presence and improve the engine compartment appearance. To match with the appearance created by HKS Intercooler Piping Kit, the buff-polished casting pipe is included. By both the sound and appearance, Super SQVIV increases the fun to drive. Learn More

Turbosmart WG40 Wastegate / Compgate 40mm (7psi/14psi)

Regular Price: $333.28

Special Price $294.78

Turbosmart WG40 Wastegate / Compgate 40mm (7psi/14psi) Designed to fit into tight engine bays, Turbosmart’s brand new 40mm external wastegate offers a class-leading flow and heat handling capabilities. It is also the smallest wastegate in the Turbosmart range. *Revolutionary Locking Ring* Comp-Gate’s unique Locking Ring provides easy access to the the actuator, allowing for quick spring changes. The new actuator housing design allowed us to significantly reduce the height of the Comp-Gate40. It is up to 25% smaller than other wastegates in our range. *Higher Flow, Smaller size* New, compact body profile offers superior flow, compact dimensions and exellent heat handling characteristics. Measuring only 99mm, the Comp-Gate40 fits easily into space-restricted engine bays, and provides better access once mounted. One-piece, coated stainless steel valve and an optimal flow through the body provide superior performance and reliability. *Unique Rotating Cap* Comp-Gate’s clever cap design, together with the locking ring allow for the cap orientation to be indexed in 12 different positions, making this one of the most versatile external gates on the market. Changing the cap is a simple procedure of loosening the locking ring (using the tool provided with the Comp-Gate) and rotating the cap into the desired position. Comp-Gate40 comes supplied with a 7PSI or 14psi Spring (installed), inlet and outlet Weld Flanges, inlet and outlet V-Band clamps, valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples and the locking ring collar removal tool. Learn More

Revel VLS 52mm 30inHg-45PSI Digital OLED Boost Gauge

Regular Price: $168.99

Special Price $160.99

The Revel VLS 2 1/16 in. (52mm) gauges allow you to keep tabs on the engine’s vital signs while minimizing the time spent looking away from the road. The OLED display used in the VLS gauges provide a crisp, clear display that does not require a backlight, which allows for an ultra slim profile that maximizes versatility and encourages creative mounting solutions. The numeric OLED display is accompanied by an LED ring around the perimeter of the gauge for readings at a glance. Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge – no need to connect each gauge individually to power. Each gauge comes packaged with the associated sensor, sun shade, mounting bracket, and all necessary wiring. 2 1/16 in. (52mm) diameter gauge 30 inHG to 45 PSI reading Digital OLED display 30 LED outer ring Daisy chain compatible Boost sensor included Mounting kit included Full Info Here: https://www.revel-usa.com/vls/boost.html Learn More

QR25DE Turbo Manifold (all years) - T3

2 Review(s) | Add Your Review

Regular Price: $599.99

Special Price $399.99

2JR is proud to release our 304 Stainless top-mount turbo manifold for all QR-series powered Nissans. Engineered for maximum efficiency while maintaining 2JR’s legendary reliability, this manifold will spool faster, last longer and produce more reliable power across the entire RPM range than any other manifold on the market. Designed for compact fitments and high power EFR compatibility, the flange is a T3. Fits all QR25DE Engines 100% Handmade from high grade thickwall 304 stainless steel Specifically designed Internal WG turbos - you can add a WG port to the side for External Sealing surfaces machined flat ensuring a leak free seal T3 Flange Learn More

Search results for 'nissan versa'