Search results for: 'tie rod'

UpRev MAF GT

Regular Price: $399.98

Special Price $379.98

UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More

Garrett GT3076R Turbo

Regular Price: $1,725.98

Special Price $1,695.98

Garrett GT3076R Ported Shroud T04E 4" CompHsg + T3 .82 A/R Turbine Hsg w/ T31 (Narrow) 4 Bolt Exit PRODUCT DESCRIPTION: This is a full size GT3076R turbo with the 60mm Turbine and 76mm compressor wheel set up in the T3 Turbine housing and the native (T04E Frame) Compressor Housing with a Ported Shroud (Anti-Surge), 4” inlet and 2” outlet. Garrett GT3076R ball bearing turbocharger and the popular .82 A/R - T31 4 bolt Turbine Housing (Undivided Entry T3 .82 A/R Turbine Housing with the “Narrow” 4 bolt exit). 525+HP potential flow. The larger 60mm turbine wheel compliments the 76mm compressor to make power without compromise. PRODUCT FEATURES: Genuine Garrett GT Aero compressor wheel Genuine Garrett GT Inconel turbine wheel Dual ball bearing CHRA rotating assembly Compressor Wheel Inducer: 57mm / Compressor Wheel Exducer: 76mm / Compressor Wheel Trim: 56 / Compressor Housing A/R: 0.60 / Turbine Wheel Inducer: 60mm / Turbine Wheel Exducer: 55mm / Turbine Wheel Trim: 84 Learn More

Garrett G30-660 STANDARD ROTATION, 0.82 A/R, T3 Undivided (open), T31 (Narrow) 4 bolt

Regular Price: $2,589.47

Special Price $2,497.78

Garrett® G30-660 standard turbo assembly kit with 3" inlet and 2" outlet compressor housing and 0.82 A/R T3 undivided (open), T31 4 bolt (narrow) outlet turbine housing. Fits on the 2JR Tubular Turbo Manifold. Product Features: New G Series compressor wheel aerodynamics / Fully machined speed sensor and pressure ports / Standard and reverse rotation configurations available / Oil restrictor and water fittings included with purchase / One piece center housing and backplate for increased durability / 4 water jacket ports for customizable installation / Mar-M turbine wheel material rated up to 1050° C | 1922° F Product Specifications: Compressor Wheel Inducer: 54mm / Compressor Wheel Exducer: 67mm / Compressor Wheel Trim: 65 / Compressor Housing A/R: 0.70 / Turbine Wheel Inducer: 60mm / Turbine Wheel Exducer: 55mm / Turbine Wheel Trim: 84 / Includes Oil Feed (1mm) Restrictor Fitting to -4AN / Includes two Coolant Fittings to -6AN Optional Accessories (kit) 4 Bolt "T31" Narrow Outlet Flange (for Downpipe): Product Code:ATP-FLS-084 4 Bolt "T31" Outlet Gasket: Product Code:ATP-GSK-012 Oil drain flange: Product Code: ATP-FLA-010 Oil drain gasket: Product Code: GRT-GSK-008 Oil drain fasteners: Product Code: MIA-FST-034 Boost Pressure Port Fitting: ATP-FTG-198 Learn More

Turbosmart WG40 Wastegate / Compgate 40mm (7psi/14psi)

Regular Price: $333.28

Special Price $294.78

Turbosmart WG40 Wastegate / Compgate 40mm (7psi/14psi) Designed to fit into tight engine bays, Turbosmart’s brand new 40mm external wastegate offers a class-leading flow and heat handling capabilities. It is also the smallest wastegate in the Turbosmart range. *Revolutionary Locking Ring* Comp-Gate’s unique Locking Ring provides easy access to the the actuator, allowing for quick spring changes. The new actuator housing design allowed us to significantly reduce the height of the Comp-Gate40. It is up to 25% smaller than other wastegates in our range. *Higher Flow, Smaller size* New, compact body profile offers superior flow, compact dimensions and exellent heat handling characteristics. Measuring only 99mm, the Comp-Gate40 fits easily into space-restricted engine bays, and provides better access once mounted. One-piece, coated stainless steel valve and an optimal flow through the body provide superior performance and reliability. *Unique Rotating Cap* Comp-Gate’s clever cap design, together with the locking ring allow for the cap orientation to be indexed in 12 different positions, making this one of the most versatile external gates on the market. Changing the cap is a simple procedure of loosening the locking ring (using the tool provided with the Comp-Gate) and rotating the cap into the desired position. Comp-Gate40 comes supplied with a 7PSI or 14psi Spring (installed), inlet and outlet Weld Flanges, inlet and outlet V-Band clamps, valve seat, 2 x 1/16th blanking plugs, 2 x 1/16th Vacuum nipples and the locking ring collar removal tool. Learn More

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 4)

Regular Price: $546.00

Special Price $529.78

Injector Dynamics ID1050X Injectors 14mm (Grey) Adaptor Top (Set of 4) Direct fit on your 2002 and up Nissan The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during development of the ID1300x, and ID1700x. Like the ID1300x and ID1700x, the ID1050x is not a modified production component. It is a built to spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Compared to the original ID1000, the ID1050x offers numerous improvements, and is sure to become the new reference. Learn More

BOOSTane Professional Octane Booster – (116 Octane)

Regular Price: $32.99

Special Price $29.99

Professional Racing Octane Booster - Quart Bottle There are a lot of additives that make claims about what they can do for your performance. BOOSTane is not one of those fuel additives. Utilizing a proprietary, patent pending blend, BOOSTane effectively raises your octane 23 points, to as high 116! Professional is focused on very high performance tuning and racing applications requiring high octane. Don’t trust claims, only in results. BOOSTane is the product of years of engineering and racing pedigree, and winner of the coveted SEMA LaunchPad Product of the Year for its innovation. Get 6 cans for $164! HIGHER Compression Engines Proprietary chelated carrier Anti-corrosion against ethanol Cleaning agents Anti-carbon build up NOT STREET LEGAL UPS Ground Shipping ONLY Learn More

Turbo Oil Drain Kit - QR25 (Gen 1)

Regular Price: $149.99

Special Price $139.45

Turbo Oil Drain Kit - QR25 (Gen 1) Only recommend for small turbo - i.e. T28 series. Uses the OEM dipstick port in the upper oil pan. Includes billet adapter, 10AN fitting for your drain line, compression fitting, OEM oring and dip stick. For install - please watch our 2JR Turbo Kit video on Youtube. You will need to cut your OEM dipstick tube to the correct length and adjust to fit the attachment point on the water pump housing (tab). Then cut the dipstick we provide right below the plastic - and use as the cap at the top of the dipstick tube. You cannot have a dipstick rod in the tube with this kit - it will prevent the turbo from draining. Learn More

PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"

2 Review(s) | Add Your Review

Regular Price: $299.98

Special Price $239.78

Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING
Learn More

QR25DE Turbo Manifold (all years) - T3

2 Review(s) | Add Your Review

Regular Price: $599.99

Special Price $399.99

2JR is proud to release our 304 Stainless top-mount turbo manifold for all QR-series powered Nissans. Engineered for maximum efficiency while maintaining 2JR’s legendary reliability, this manifold will spool faster, last longer and produce more reliable power across the entire RPM range than any other manifold on the market. Designed for compact fitments and high power EFR compatibility, the flange is a T3. Fits all QR25DE Engines 100% Handmade from high grade thickwall 304 stainless steel Specifically designed Internal WG turbos - you can add a WG port to the side for External Sealing surfaces machined flat ensuring a leak free seal T3 Flange Learn More

Search results for 'tie rod'