Search results for 'cam gears'
14 Item(s)
Grid List
-
QR25DE Head - Complete
Regular Price: $649.99
Special Price $499.98
QR25DE Head - Complete Fits all Gen1 or Gen 2 QR25 Engines Includes: cam buckets, cam caps, OEM Cams (intake and exhaust), OEM Springs, OEM Headgasket. Does not include Intake Cam Phaser or Exhaust Cam Sprocket We use stock OEM cores and perform the following services: - Hot Tank / Cleaned - 5 Angle Valve Job - OEM Valve Seals - Mating Surface Decked Flat - OEM Valve Springs - OEM Cam Set (Hot Tanked) Optional Parts: - Hi Rev Valve Springs - Sub OEM Cams for JWT C1 / RZ / S1s - Titanium Retainers - Intake Cam Phaser / Exh Cam Sprocket - Cometic Headgasket - ARP Headbolts Learn More -
Cam Phaser Sprocket (02-06 QR25)
Regular Price: $339.87
Special Price $289.78
If your QR suffers from chain rattle at start up when cold, the issue more than likely is a bad intake sprocket phaser. This can lead to jumped timing, bent valves, broken chains and/or broken main crank sprockets. 2JR offers new cam phaser sprockets. We have these in stock! Do not wait to replace your sprocket and risk an engine failure. Learn More -
2JR QR25 Hi-Power RZ Cams (2002-2012 QR25DE)
Regular Price: $699.99
Special Price $649.99
2JR in conjunction with JWT releases the highest hp cam set available for the (02-12) QR25. With gains up to 235whp on race gas. 2 years of dyno testing, track use and street testing has perfected these cam sets. A tune IS required for the performance of these cams. THEY ONLY WORK ON HIGH COMP and WILL LOSE SOME LOW END UNDER 3K - 15HP. But they will scream after 5k and can rev past 8K However, they will produce a lopey idle. Everyone will know your QR is cammed! Cam gear is not included and CANNOT be used on these high lift cams Available for both 02-06 QRs and 07-12 QRs - Will fit Sentra, Altima and Frontier - all years with 2.5L Engines Learn More -
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
VQ35 C-10 JWT CAMSHAFT SET
$1,386.33The biggest cam ever produced by JWT. MUST USE WITH JWT SPRING/SHIM, DOES NOT FIT REV-UP MOTOR (REQUIRES HEAD CLEARANCING) Learn More -
VQ35 C-9 JWT CAMSHAFT SET
$1,386.33Ultimate Race Cam for your VQ35 / 283.5 DEG/.516" MUST USE WITH JWT SPRING/SHIM SET Learn More -
VQ35 C-8 JWT CAMSHAFT SET
$1,386.33High HP, Racing cam set. 272 DEG/.473 Must use JWT Valve Springs Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
QR25 JWT CAMSHAFT SET S1 BILLET CAMS
Regular Price: $699.99
Special Price $649.98
CAMSHAFT SET QR25DE BILLET CAMS. GOOD IDLE AND DRIVABILITY WITH AN 8+HP GAIN. USES STOCKS SPRING AT STOCK REV CUT OR AQR25-SPRNG SPRING SET IF RUNNING TO 7200RPM.
FITS:
S1 Cam - Excellent street cam, good power and idle. Go with the best, JWT Learn More
ALTIMA, SENTRA, ALTIMA 2002+, SENTRA 2.5L,
ENGINES:
QR25DE, -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
QR25 JWT Beehive Spring
$244.48QR25DE JWT BEEHIVE SPRING FOR USE WITH JWT COMPETITION CAMSHAFTS TO .600" LIFT. MUST USE RETAINER ARETN-BHIVE ON EARLY ENGINES. 35.96mm INSTALLED HEIGHT, USE ORIGINAL SPRING BASE SHIMS. Complete set FITS: ALTIMA 2002+, SENTRA 2.5L ENGINES: QR25DE Learn More
14 Item(s)
Grid List