Search results for '%231 - Street%2FStrip Spec Includes- Tubular arms%2C Poly bushings and Rear mount- %2454'
Maximum words count is 10. In your search query was cut next part: Rear mount- %2454.
19 Item(s)
Grid List
-
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"
Regular Price: $899.00
Special Price $729.98
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
B15 V2 High Performance Twin Tip Catback
Regular Price: $699.99
Special Price $599.98
The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 2.5" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 2.5" stainless midpipe for the ultimate in performance, power and looks. Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
Magnaflow 2002-2006 Nissan Sentra SE-R Spec V Stainless Steel Cat-Back
Regular Price: $730.00
Special Price $709.78
Deep tone, stainless steel - excellent SpecV exhaust! Description: Sys C/B 02-03 Nissan Sentra Se-R 2. Main Piping Diameter: 2.25 Material: Stainless Sound Level: Moderate Exit Location: Single Straight Passenger Side Rear Exit Quantity: Single * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More -
Aluminum (ACB+) Heavy Duty Alternator Clearance Bracket (B15 and B16)
Regular Price: $99.99
Special Price $79.99
ACB+ Made from Aluminum for extra long life and durability. Alternator clearance bracket allows you to remove your header without having to remove your alternator. Adds over 2" of clearance. Keeps the alternator somewhat cooler as well. Includes hardware and threaded ends. You must check for clearance between the ACB and the alternator bracket on the engine - and add a washer if necessary. Learn More -
QR25DE (02-06) Hi-Power Spyder Header
Regular Price: $499.99
Special Price $439.78
QR25DE (02-06) Hi-Power Spyder Header In Stock Materials: Brushed 304 Stainless Steel Fitment: Does NOT require a fan change (fits OEM fans) / Alternator clearance bracket is NOT required / Fits on OEM Midpipe or 2JR Midpipe Chassis: 02-06 Sentra QR25 02-06 Altima QR25 Performance: Excellent low end TQ with good top end results on the Dyno. Includes all stainless steel construction with thick flanges and collector. Includes a spike in the collector for increased HP. 1.75" Primaries step up to 2" secondary runners for TOP END POWER! Slightly offset piping size gives the header a nice deep rumble. Learn More -
B15 SpecV Race Header + 3" Midpipe
Regular Price: $949.00
Special Price $698.78
Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More -
ARP Stainless Steel Exhaust Stud Kit
Regular Price: $126.98
Special Price $116.78
ARP Stainless Steel Exhaust Stud Kit ARP stainless steel accessory studs can be used for exhaust systems, intake manifolds, and a number of other uses. They are made of ARP's stainless 300 and are impervious to the rust and corrosion that plague ordinary fasteners. The studs feature a unique nut starter nose and a hex broached tip, allowing them to be easily installed using an Allen wrench. Stainless steel 12-point nuts and washers are included. Give your engine a show quality look with ARP stainless steel accessory bolts. Perfect for Nissan or Toyota Exhaust and Turbo Manifolds Product: 12-Point, M10 x 1.25 1.90" Length Set of 8 Learn More -
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
Sentra 2.5L Denso Oxygen Sensors (Pair/Single)
Sentra 2.5L Denso Oxygen Sensors (Pair/Single) Select Year 02 through 06. Then Upstream / Downstream or Both Superior Design Maximizes Engine Performance and Fuel Efficiency DENSO's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel mixture under idle, moderate acceleration and cruise conditions. Under heavy acceleration the oxygen sensor goes into "open loop," which basically means that the engine management computer system ignores the oxygen sensor. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio. Learn More -
02 Sensor 90° Catted De-fouler - Stainless Steel
Regular Price: $35.00
Special Price $26.00
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
Resonated Insert for 2JR Side Exit / Midpipes / Exhausts
Regular Price: $40.00
Special Price $28.00
Resonated Insert for the 2JR Side Exit - will also work in the 2JR 3" Midpipe and Medusa Catbacks. The resonator is affixed by drilling a 1/4 hole in the pipe and using the supplied stainless hex set screw to attach the resonator. Can be installed and removed in minutes. Choose 7.99 shipping option at Checkout if in the United States. Learn More -
B15 3" V3 High Power Side Exit
Regular Price: $499.99
Special Price $398.78
3" V3 High Power Side Exit - More HP! B15 3" V3 High Power Side Exit with even more HP gains than our V1 or V2. Quieter than before with amazing sound, with twin resonators - similar to a V6. This is the highest HP exhaust for the QR25. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Bolts to any midpipe in the factory location. Version 3: Twin Resonators - Both Pipes have Resonators 40% lighter than stock Add the 2JR 3" Resonated Midpipe for even deeper, 8db quieter sound NOTE: Version 3.5 - piping is NON-POLISHED STAINLESS STEEL Learn More -
2JR Nissan/Toyota CNC Stainless Header Stud Kit
Regular Price: $119.87
Special Price $86.11
2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More -
Limited Ed - B15 Stainless Twin Resonated 2.5" V3 Side Exit
Regular Price: $489.00
Special Price $369.99
Version 3 of our side exit. Quieter than before with amazing sound - similar to a V6. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Add optional 2.5" Resonated 2JR Flex Midpipe Version 3 - 2.5" stainless with 1/2" thick stainless flanges Twin Resonators (not shown) 50% lighter than stock Learn More -
02 Sensor De-Fouler - Stainless Steel
Regular Price: $17.99
Special Price $12.99
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More
19 Item(s)
Grid List