Search results for '05 Nissan altima ser'
-
ARP Stainless Steel Exhaust Stud Kit
Regular Price: $126.98
Special Price $116.78
ARP Stainless Steel Exhaust Stud Kit ARP stainless steel accessory studs can be used for exhaust systems, intake manifolds, and a number of other uses. They are made of ARP's stainless 300 and are impervious to the rust and corrosion that plague ordinary fasteners. The studs feature a unique nut starter nose and a hex broached tip, allowing them to be easily installed using an Allen wrench. Stainless steel 12-point nuts and washers are included. Give your engine a show quality look with ARP stainless steel accessory bolts. Perfect for Nissan or Toyota Exhaust and Turbo Manifolds Product: 12-Point, M10 x 1.25 1.90" Length Set of 8 Learn More -
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"
Regular Price: $899.00
Special Price $729.98
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 V2 High Performance Twin Tip Catback
Regular Price: $699.99
Special Price $599.98
The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 2.5" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 2.5" stainless midpipe for the ultimate in performance, power and looks. Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
QR25DE (02-06) Hi-Power Spyder Header
Regular Price: $499.99
Special Price $439.78
QR25DE (02-06) Hi-Power Spyder Header In Stock Materials: Brushed 304 Stainless Steel Fitment: Does NOT require a fan change (fits OEM fans) / Alternator clearance bracket is NOT required / Fits on OEM Midpipe or 2JR Midpipe Chassis: 02-06 Sentra QR25 02-06 Altima QR25 Performance: Excellent low end TQ with good top end results on the Dyno. Includes all stainless steel construction with thick flanges and collector. Includes a spike in the collector for increased HP. 1.75" Primaries step up to 2" secondary runners for TOP END POWER! Slightly offset piping size gives the header a nice deep rumble. Learn More -
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
2JR Nissan/Toyota CNC Stainless Header Stud Kit
Regular Price: $119.87
Special Price $86.11
2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More -
Magnaflow 2002-2006 Nissan Sentra SE-R Spec V Stainless Steel Cat-Back
Regular Price: $730.00
Special Price $709.78
Deep tone, stainless steel - excellent SpecV exhaust! Description: Sys C/B 02-03 Nissan Sentra Se-R 2. Main Piping Diameter: 2.25 Material: Stainless Sound Level: Moderate Exit Location: Single Straight Passenger Side Rear Exit Quantity: Single * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More