Search results for 'bolt'
10 Item(s)
Grid List
-
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More -
B15 3" V3 High Power Side Exit
Regular Price: $499.99
Special Price $398.78
3" V3 High Power Side Exit - More HP! B15 3" V3 High Power Side Exit with even more HP gains than our V1 or V2. Quieter than before with amazing sound, with twin resonators - similar to a V6. This is the highest HP exhaust for the QR25. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Bolts to any midpipe in the factory location. Version 3: Twin Resonators - Both Pipes have Resonators 40% lighter than stock Add the 2JR 3" Resonated Midpipe for even deeper, 8db quieter sound NOTE: Version 3.5 - piping is NON-POLISHED STAINLESS STEEL Learn More -
Limited Ed - B15 Stainless Twin Resonated 2.5" V3 Side Exit
Regular Price: $489.00
Special Price $369.99
Version 3 of our side exit. Quieter than before with amazing sound - similar to a V6. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Add optional 2.5" Resonated 2JR Flex Midpipe Version 3 - 2.5" stainless with 1/2" thick stainless flanges Twin Resonators (not shown) 50% lighter than stock Learn More -
Magnaflow 2002-2006 Nissan Sentra SE-R Spec V Stainless Steel Cat-Back
Regular Price: $730.00
Special Price $709.78
Deep tone, stainless steel - excellent SpecV exhaust! Description: Sys C/B 02-03 Nissan Sentra Se-R 2. Main Piping Diameter: 2.25 Material: Stainless Sound Level: Moderate Exit Location: Single Straight Passenger Side Rear Exit Quantity: Single * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More -
B15 SpecV Race Header + 3" Midpipe
Regular Price: $949.00
Special Price $698.78
Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More -
ARP Stainless Steel Exhaust Stud Kit
Regular Price: $126.98
Special Price $116.78
ARP Stainless Steel Exhaust Stud Kit ARP stainless steel accessory studs can be used for exhaust systems, intake manifolds, and a number of other uses. They are made of ARP's stainless 300 and are impervious to the rust and corrosion that plague ordinary fasteners. The studs feature a unique nut starter nose and a hex broached tip, allowing them to be easily installed using an Allen wrench. Stainless steel 12-point nuts and washers are included. Give your engine a show quality look with ARP stainless steel accessory bolts. Perfect for Nissan or Toyota Exhaust and Turbo Manifolds Product: 12-Point, M10 x 1.25 1.90" Length Set of 8 Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
2JR Nissan/Toyota CNC Stainless Header Stud Kit
Regular Price: $119.87
Special Price $86.11
2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More
10 Item(s)
Grid List