Search results for 'long tube header'

9 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. PRE ORDER B15 V2 Long Runner Medusa UEL Header

    PRE ORDER B15 V2 Long Runner Medusa UEL Header

    Regular Price: $599.99

    Special Price $398.78

    As low as: $359.78

    Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. 

    Learn More
  2. *Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"

    *Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"

    Regular Price: $899.00

    Special Price $729.98

    *Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More
  3. B15 V2 High Performance Twin Tip Catback

    B15 V2 High Performance Twin Tip Catback

    Regular Price: $699.99

    Special Price $529.98

    The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 2.5" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 2.5" stainless midpipe for the ultimate in performance, power and looks. Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More
  4. Aluminum (ACB+) Heavy Duty Alternator Clearance Bracket (B15 and B16)

    Aluminum (ACB+) Heavy Duty Alternator Clearance Bracket (B15 and B16)

    Regular Price: $99.99

    Special Price $79.99

    ACB+ Made from Aluminum for extra long life and durability. Alternator clearance bracket allows you to remove your header without having to remove your alternator. Adds over 2" of clearance. Keeps the alternator somewhat cooler as well. Includes hardware and threaded ends. You must check for clearance between the ACB and the alternator bracket on the engine - and add a washer if necessary. Learn More
  5. 2JR Nissan/Toyota CNC Stainless Header Stud Kit

    2JR Nissan/Toyota CNC Stainless Header Stud Kit

    Regular Price: $119.87

    Special Price $86.11

    2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More
  6. B15 SpecV Race Header + 3" Midpipe

    B15 SpecV Race Header + 3" Midpipe

    Regular Price: $949.00

    Special Price $698.78

    Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More
  7. PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"

    PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"

    Regular Price: $299.98

    Special Price $239.78

    Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING
    Learn More
  8. QR25DE (02-06) Hi-Power Spyder Header

    QR25DE (02-06) Hi-Power Spyder Header

    Regular Price: $499.99

    Special Price $439.78

    QR25DE (02-06) Hi-Power Spyder Header In Stock Materials: Brushed 304 Stainless Steel Fitment: Does NOT require a fan change (fits OEM fans) / Alternator clearance bracket is NOT required / Fits on OEM Midpipe or 2JR Midpipe Chassis: 02-06 Sentra QR25 02-06 Altima QR25 Performance: Excellent low end TQ with good top end results on the Dyno. Includes all stainless steel construction with thick flanges and collector. Includes a spike in the collector for increased HP. 1.75" Primaries step up to 2" secondary runners for TOP END POWER! Slightly offset piping size gives the header a nice deep rumble. Learn More
  9. B15 QR Stainless Flex Resonated Midpipe 3.00"

    B15 QR Stainless Flex Resonated Midpipe 3.00"

    Regular Price: $269.99

    Special Price $239.98

    Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING
    Learn More

9 Item(s)

per page

Grid  List 

Set Ascending Direction