Search results for 'sentra b13'
11 Item(s)
Grid List
-
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"
Regular Price: $899.00
Special Price $729.98
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
Sentra 2.5L Denso Oxygen Sensors (Pair/Single)
Sentra 2.5L Denso Oxygen Sensors (Pair/Single) Select Year 02 through 06. Then Upstream / Downstream or Both Superior Design Maximizes Engine Performance and Fuel Efficiency DENSO's light duty oxygen sensor started to appear on vehicles with the development of fuel injection systems. The basic job of the sensor is to monitor the air fuel mixture under idle, moderate acceleration and cruise conditions. Under heavy acceleration the oxygen sensor goes into "open loop," which basically means that the engine management computer system ignores the oxygen sensor. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio. Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
02 Sensor 90° Catted De-fouler - Stainless Steel
Regular Price: $35.00
Special Price $26.00
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
B15 V2 High Performance Twin Tip Catback
Regular Price: $699.99
Special Price $599.98
The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 2.5" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 2.5" stainless midpipe for the ultimate in performance, power and looks. Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
QR25DE (02-06) Hi-Power Spyder Header
Regular Price: $499.99
Special Price $439.78
Out of stock
QR25DE (02-06) Hi-Power Spyder Header In Stock Materials: Brushed 304 Stainless Steel Fitment: Does NOT require a fan change (fits OEM fans) / Alternator clearance bracket is NOT required / Fits on OEM Midpipe or 2JR Midpipe Chassis: 02-06 Sentra QR25 02-06 Altima QR25 Performance: Excellent low end TQ with good top end results on the Dyno. Includes all stainless steel construction with thick flanges and collector. Includes a spike in the collector for increased HP. 1.75" Primaries step up to 2" secondary runners for TOP END POWER! Slightly offset piping size gives the header a nice deep rumble. Learn More -
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
Magnaflow 2002-2006 Nissan Sentra SE-R Spec V Stainless Steel Cat-Back
Regular Price: $730.00
Special Price $709.78
Deep tone, stainless steel - excellent SpecV exhaust! Description: Sys C/B 02-03 Nissan Sentra Se-R 2. Main Piping Diameter: 2.25 Material: Stainless Sound Level: Moderate Exit Location: Single Straight Passenger Side Rear Exit Quantity: Single * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More -
02 Sensor De-Fouler - Stainless Steel
Regular Price: $17.99
Special Price $12.99
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
PRE ORDER B15 V2 Long Runner Medusa UEL Header
Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The V2 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Comes with Billet Aluminum Alternator Clearance Bracket. You will need one slim fan (included) to run this header because of its size and runner design. It will bolt to the OEM midpipe or the 2JR 2.5 or 3" midpipe. You can remove the fan and ACB option and save an additional $74! Make sure you have these parts already. For a quick install - select the 2JR Plug and Play Fan Wire kit To install the fan - the factory clip has 4 wires, the top two are position (looking at where the clip is) and the bottom two are neg. Connect the blue fan wire to the top two + pos wires and the black 2J fan wire to the bottom two - wires. Fits all 02-06 Sentras and Altimas - qr25de only. Learn More
11 Item(s)
Grid List