Search results for 'tie rod'
-
JE RTR High Comp Piston Set - QR25 (10.8-1)
Regular Price: $821.98
Special Price $782.19
JE High Comp Piston Set - QR25 Fits ALL QR25s / Bore 89.0mm, Stroke 100mm, Rod Length 143mm, Flat Top -0.6cc, Grams 338, Set of 4 Compression Ratio: 10.8:1 JE Pistons are machined by the most advanced CNC machining technologies available. JE forged Pistons are trusted by racers and engine builds for dependability. JE Pistons are compatible with boost and nitrous. Crown requires no deburring or preparation 2618 T6 high tensile forged aluminum JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Crown design features smooth flowing radii for excellent flame travel. 1.0 x 1.2 x 2.8mm ring widths. .787 x 2.250 straight wall carbon steel wrist pin provided. Pin fitting, wire locks and rings included Compression ratio calculated at .020" deck clearance with .025" thick head gasket Learn More -
QR25 Fully Counterweighted and Knife Edged Crankshaft
Regular Price: $1,260.98
Special Price $499.00
QR25 Fully Counterweighted and Knife Edged Crankshaft GEN 1 - QR25DE Will need to be turned/polished (journals)Normally reserved for racing applications, a knife edged crankshaft can help the engine produce more horsepower. Removing this material and bringing it to a sharp edge does a couple of things. First, knife edging can often remove pounds of weight. Less weight equates to a rotating assembly that spins with less resistance, and this in itself is responsible for some gains in horsepower.
The counterweights on a Stock Nissan crank is flat on the ends. As the crankshaft rotates, these counterweights come into direct contact with the engine's oil. This contact creates friction and splashes oil all over the bottom end of the engine. A knifed edged crankshaft actually glides through the oil much easier and encounters far less friction. Anytime friction can be reduced in an engine's rotating assembly or valvetrain, additional horsepower gains are realized. Excellent for turbo or NA applications.
IN STOCK NOW!
Learn More -
QR25 Main / Rod Bearing Set w Thrust
Regular Price: $168.40
Special Price $139.14
QR25 Main and Rod Bearing Set with Thrust Washers Fits ALL QR25 engines. Bearings are Japan Made Daido Metal OEM Spec. Thrust Washers are OEM Nissan. Bearings can be ordered in standard, +25, +50, +75 Daido Metal Engine bearings are the mainstay of Daido Metal’s operations, and have been adopted by all Japanese automobile manufacturers, as well as the majors in other countries. We have the leading market share in Japan for plain bearings for engines. Today’s sophisticated, high-technology engines pose demands for high performance and efficiency. Our bearings are also used for the high-speed engine of race cars, including Formula 1, and provide an ultra-high-tech edge in motor sports applications. Learn More -
Boundary QR25DE Billet Oil Pump Gear Set
Regular Price: $429.98
Special Price $398.78
Boundary QR25DE Billet Oil Pump Gear Set Boundary oil pump gears are 100% manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 900whp, with higher efficiency, less friction, and backed by one of the industries best warranty’s. Oil Pump Gear Features Mirror Finished and Surface Hardened Surface Ground gears for the ultimate in fitment and performance Indestructible core Inner and outer gear set included Unique race inspired gerotor design Symmetrical tooth profile elemenates the gears weak spot making our gear sets indestructible Each set hand, machine, and hardness inspected with Blueprinting Report Learn More -
QR25 Nismo Motul Oil Change Kit (All years)
Regular Price: $139.78
Special Price $109.76
2JR Nismo Oil Change Kit Includes 5 QTS of Motul Nismo 5w40 / K&N Gold Large Oil Filter and OEM Seal for Drain Plug NISSAN MOTORSPORTS INTERNATIONAL - High performance lubricant specially developed for high output, high torque engines. NISMO COMPETITION OIL is the best protection you can get for your engine. This oil grew up with that engine and its development focused on high performance motor sports use: tested in the 2008 Tokachi 24 Hours, run in the NISSAN GT-R NISMO RC and NISSAN GT-R Club Track Edition, and raced in the 24 Hours Nurburgring. The final result of development testing was the choice of a 5W40 over a 0W40 viscosity grade. 2193E (5W40) is a select, synthetic multi-grade oil which mixes polyolesters, known for their superlative viscosity at low temperatures, into the base oil. Formulated for low friction but maintaining generous filming properties, this NISMO-MOTUL motor oil will minimize engine wear to the bearings where pressure is at its highest. Learn More -
QR25DE Hitachi OEM Coil Pack Set (4) 02-06
Regular Price: $198.00
Special Price $184.99
QR25DE Hitachi OEM Coil Pack Set (4) 02-06
Complete set (4 included) of OEM Hitachi Coil Packs for your Gen 1 QR - fits all models Sentra/Altima/Frontier with the Gen1 QR engine (02-06)
12 Month / 12k Mile Warranty fr.
- Hitachi ENSURE FAST STARTS: this Hitachi Ignition Coil ensures fast starts, consistent engine performance, and optimized fuel efficiency. The coil is OE-engineered for a streamlined path to the spark plug and reduced shorts, and it eliminates the need for spark plug wires. High-quality wire coating ensure resilient, long-lasting functionality and minimal current fluctuation
- ENSURE EFFECTIVE COMBUSTION: the Hitachi Ignition Coil delivers optimal combustion and consistent, high-energy ignition output. These Hitachi Ignition Coils, also known as engine coils or spark plug coils, deliver the highest in durability and operational performance. Designed for exacting fitment and connectivity, you can install the Hitachi Ignition Coils with OE-confidence
- RELY ON PROVEN DURABILITY: Hitachi coil designs are developed in their test lab and proven tough at extreme conditions that are far beyond any operational environment that a vehicle would experience. Gold-plated connectors prevent corrosion
-
Sentra Spec-V 1-Step Colder Performance NGK Spark Plugs (02-06) - Full Set
Regular Price: $29.99
Special Price $24.99
For the 02-06 2.5L Nissan QR25 Designed to operate over a much wider heat range than ordinary plugs Resists carbon buildup and pre-ignition High alumina ceramics for better heat transfer and electrical insulation Solid copper core and nickel tipped electrode provide a longer plus life Patented triple gasket sealing process eliminates the possibility of combustion gas leakage Solid copper core for greater spark Longer insulator nose prevents fouling Set of 4 - INCLUDES FULL SET Learn More -
Sentra Spec-V 1-Step Colder Performance NGK Laser Iridium IX Spark Plugs (02-06) - Full Set
Regular Price: $36.72
Special Price $34.00
For the 02-06 Spec-V - 1 step colder iridium laser IX plug set! Includes ALL 4! NGK's IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast. Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark Iridium Alloy has an Extremely High Melting Point, Perfect for Today's High-Tech, High Performance Engines Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties Corrugated Ribs Prevent Flashover Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer Copper Core Aids in Heat Removal Triple Seals Prevent Leakage Learn More -
QR25 Forged Turbo Block
Regular Price: $3,699.99
Special Price $3,299.99
QR25 Fully Forged Turbo Short Block built with 89.5mm Wiseco Dished Pistons with hard moly coated skirts, 2JR H Beam Forged Rods, ARP Rod Bolts and OEM Nissan Crank. Machined with ACL bearings, new OEM mains. Ready to drop in. Just add your head or a fresh 2JR head with 2JR valve springs for $599 more. Good for NA Builds and Turbo Builds up to 400whp. Excellent durability against detonation and extreme use. 1. 2JR 89.5mm Wiseco Dished Pistons with hard moly coated skirts 2. 2JR Forged H-Beam Rods 3. ARP Rod Bolts 4. OEM Crankshaft 5. ACL Bearings Optional: 2JR QR25DE Sleeved Block Darton MID Sleeves, installed. The stock block tends to crack the liner after 400whp. These blocks are good to over 700whp while the Darton MID Sleeves are made of ductile iron and are able to hold over 1000hp. The sleeves are unfinished and will need to be honed to match your piston size. Benefits: Cast iron performance in an aluminum block Improved block integral strength Improved cooling Learn More -
2JR High Performance Block
Regular Price: $2,599.99
Special Price $1,899.78
2JR High Performance Short Block built with 89.5mm 2JR Turbo cast pistons with hard anodized tops, 2JR I Beam Forged Rods, ARP Rod Bolts and OEM B15 SpecV Crank. Machined with ACL bearings, new OEM mains. Ready to drop in your 02-06 B15! Just add your head or a fresh 2JR head with 2JR valve springs for $599 more. Good for NA Builds and Turbo Builds up to 350whp. 1. 2JR Stock Comp Turbo Hard Anodized Pistons 2. 2JR Forged I-Beam Rods 3. ARP Rod Bolts 4. OEM B15 SpecV Crank 5. ACL Bearings Learn More -
2JR High Comp Short Block (10.0-1)
Regular Price: $2,699.99
Special Price $2,199.99
2JR High Comp Short Block built with B16 SpecV High Comp Pistons, B15 SpecV Rods and B15 SpecV Crank. Machined with ACL bearings, new OEM mains. Ready to drop in your 02-06 B15! Just add your head or a fresh 2JR head with 2JR valve springs for $599 more. This motor, with 2JR cams and plenum made 255 crank hp, NA on pump gas. 1. B16 SpecV High Comp Pistons - 10.1-1 2. B15 Spec-V Rods 3. B15 SpecV Crank 4. ACL Bearings Learn More -
(02-06) QR25DE Complete Engine (Street or Race)
Regular Price: $4,200.00
Special Price $3,990.00
(02-06) QR25DE Complete Engine 2JR Fully Built QR Engines are now available. Built to your specs, for NA, High Comp or Boost - including sleeved blocks capable of +700whp. No one has built more QRs than 2J with a commitment to quality and excellence. Engines are drop shipped to your location, ready for install or have us remove and install your new engine. Head Work – Machined Head 5 Angle valve angle job New OEM valves seals Cam Buckets (clearance to spec) OEM Cam Sets Cometic Headgasket Block – Balanced and Blueprinted, Assembled with Head (Long Block – complete/assembled) OEM Piston Set 9.5-1 Compression (Thicker Ring Lands & Better Quench Pads) Block Honed 2JRacing H Beam or I Beam Forged Rod Sets ARP Rod Bolts ARP Head Bolts ACL Main and Rod Bearings New OEM Front Cover (oil pump) New Water Pump JWT BSR Kit Complete Timing Equipment (chain, guides, tensioner, and sprocket) ALL New OEM Seals, Gaskets, O-Rings and Plugs New OEM Cam and Crank Sensors NGK LFR6A-11 Plugs Learn More -
Cometic Tri Layer Metal Headgasket - B15 or B16
Regular Price: $159.99
Special Price $139.99
Now available! For the B15 or B16. .030" standard thickness, 89mm bore size. Custom sizes available but take several weeks to produce. Using 1mm oversize pistons, choose 90mm bore size. Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements. Learn More -
Wiseco High Comp Forged Piston Kit 10.5:1
Regular Price: $761.38
Special Price $742.78
QR25DE - fits years 2002 to 2013. 4032 extruded material forged for maximum strength. Wiseco leads the performance aftermarket by producing the highest quality forged pistons for domestic automobiles, sport compact and racing applications right here in the USA. Wiseco is unique because we forge all of our own pistons in house, and produce all of our own forge tooling right here in the USA. This allows us to control all aspects of our manufacturing process from raw bar to skirt coating finished parts. Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. Features include: - High strength aluminum forgings - Super lightweight designs - Fully CNC machined and balanced to +/- 1 gram - Wrist pins included at no extra cost - Accumulator groove included - Double pin oilers, force fed from oil ring - Pick lock grooves for easy lock removal Some sizes may take 2-4 weeks for production by Wiseco. Comes in the following sizes - standard .5 mm overbore (20 over) 1 mm overbore (40 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
Wiseco Standard Comp Forged Piston Kit (Turbo and Stock)
Regular Price: $761.38
Special Price $742.78
QR25DE - fits years 2002 to 2013. 4032 extruded material forged for maximum strength. Wiseco leads the performance aftermarket by producing the highest quality forged pistons for domestic automobiles, sport compact and racing applications right here in the USA. Wiseco is unique because we forge all of our own pistons in house, and produce all of our own forge tooling right here in the USA. This allows us to control all aspects of our manufacturing process from raw bar to skirt coating finished parts. Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. 8.55-1 COMPRESSION Features include: - High strength aluminum forgings - Super lightweight designs - Fully CNC machined and balanced to +/- 1 gram - Wrist pins included at no extra cost - Accumulator groove included - Double pin oilers, force fed from oil ring - Pick lock grooves for easy lock removal Some sizes may take 2-4 weeks for production by Wiseco. Comes in the following sizes - standard .5 mm overbore (20 over) 1 mm overbore (40 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
2JR QR25 High Performance Cast Piston Set with Rings 9.5-1
Regular Price: $349.99
Special Price $249.99
2JR produced turbo pistons with hastings racing ring set. Hard anodized piston domes to resist detonation. Thicker ring lands to prevent cracking. Moly coating on the skirts to lubricate piston walls. 9.5-1 Comp with the best anti-detonation quench pads on the piston tops. Good for up to 350whp. Can also be used on all NA projects since these pistons have the same comp ratio as the poorly designed B15 pistons. INCLUDES HASTINGS PISTON RINGS - Made in the USA Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. Comes in the following sizes - standard .5 mm overbore (20 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
2JR HiPower H-Beam Rod Set (700whp)
Regular Price: $469.99
Special Price $429.99
2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.
H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness.
I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je
Learn More