Search results for '%25252525252525252525252525252525252525252525252525231 - Street%252525252525252525252525252525252525252525252525252FStrip Spec I'

REVEL VLS Dual Temp Intercooler Gauge 52mm Universal This is the Revel VLS Dual Temperature Intercooler Gauge. This gauge displays both the incoming air charge and the outgoing air charge to determine how effective your intercooler is at operation. For those of you who are new to Revel, they are Tanabe's brand of exclusive gauges designed to provide fast and accurate readings. 52mm diameter gauge (2 1/16 in.) Monitor both enter & exit temperatures 50 ºF to 300 ºF readings Digital OLED display 14 LED outer ring per side Air temperature sensors included (3/8 NPT thread pitch) Mounting kit included Requires weld-in bung (not included) Learn More

B15 Triple Gauge Pod - Radio Delete/Pocket Built by Ortiz Custom Pods. B15 Triple Gauge Pod - Radio Delete/Pocket for the B15 Sentra. Fits 52mm Gauges. Radio can be moved to the pocket under the HVAC controls. Learn More

The Revel VLS Wideband A/F Ratio gauge utilizes the best in sensor technology with the included BOSCH LSU 4.9 oxygen content and Lambda value sensor. While many aftermarket wideband gauges are still operating on the older, less accurate sensor, OE manufacturers and Revel VLS have made the switch to LSU 4.9, the new standard. Compatible with gasoline and E85. BOSCH 4.9 LSU Sensor Included with the Revel VLS Wideband A/F Ratio gauge is the BOSCH 4.9 LSU Sensor for the most accurate readings. This sensor is longer lasting and is accurate to 0.1 AFR reading and does not require to be free-air calibrated upon initial setup* (however it will still need further recalibration based on altitude changes and general sensor wear in order to ensure accuracy). This is a major improvement over the previous LSU 4.2 sensor. The kit also includes the weld-in bung that is required for the installation of the sensor. (1) Wideband Air/Fuel Ratio Gauge 2 1/16 in. (52mm) (1) Power Harness (1) Electronic Control Unit (1) Gauge Signal Harness (Control Unit to Gauge) (1) Analog Output Harness (1) Oxygen Sensor and wiring (1) Weld-In Oxygen Sensor Bung (1) Bung Plug (1) Mounting Pod (1) Sun Shade (hood) (1) 3M double sided tape (2) Mounting Bracket Threaded Extension (2) Washers (2) Nuts (1) Mounting Bracket Full Info Here: https://www.revel-usa.com/vls/wideband.html Learn More

The Revel VLS Oil Pressure gauge monitors the oil pressure from 0 PSI up to 150 PSI. The OLED screen allows for easy readings from any viewing angle, and a 30 LED outer ring for viewing at a quick glance. This kit is included with the oil pressure sensor in 1/8 NPT thread pitch for easy installation. The Revel VLS Oil Pressure gauge is daisy-chain compatible with the VLS Boost gauge, VLS Water Temperature gauge, VLS Oil Temperature gauge, and VLS Voltage gauge. The Revel VLS 2 1/16 in. (52mm) gauges allow you to keep tabs on the engine’s vital signs while minimizing the time spent looking away from the road. The OLED display used in the VLS gauges provide a crisp, clear display that does not require a backlight, which allows for an ultra slim profile that maximizes versatility and encourages creative mounting solutions. The numeric OLED display is accompanied by an LED ring around the perimeter of the gauge for readings at a glance. Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge – no need to connect each gauge individually to power. Each gauge comes packaged with the associated sensor, sun shade, mounting bracket, and all necessary wiring. 2 1/16 in. (52mm) diameter gauge 0 PSI to 150 PSI reading Digital OLED display 30 LED outer ring Daisy chain compatible Oil pressure sensor included (1/8 NPT thread pitch) Mounting kit included Full Info Here: https://www.revel-usa.com/vls/oil-press.html Learn More

The Revel VLS Oil Temperature gauge monitors temperatures starting from 100 ºF all the way up to 300 ºF. The OLED screen allows for easy readings from any viewing angle, and a 30 LED outer ring for viewing at a quick glance. This kit is included with the water temperature sensor in 1/8 NPT thread pitch for easy installation. The Revel VLS Oil Temperature gauge is daisy-chain compatible with the VLS Boost gauge, VLS Water Temperature gauge, VLS Oil Pressure gauge, and VLS Voltage gauge. The Revel VLS 2 1/16 in. (52mm) gauges allow you to keep tabs on the engine’s vital signs while minimizing the time spent looking away from the road. The OLED display used in the VLS gauges provide a crisp, clear display that does not require a backlight, which allows for an ultra slim profile that maximizes versatility and encourages creative mounting solutions. The numeric OLED display is accompanied by an LED ring around the perimeter of the gauge for readings at a glance. Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge – no need to connect each gauge individually to power. Each gauge comes packaged with the associated sensor, sun shade, mounting bracket, and all necessary wiring. (1) Oil Temperature Gauge 2 1/16 in. (52mm) (1) Power Harness (1) Oil temperature sensor and wiring harness (1) Mounting Pod (1) Sun Shade (hood) (1) 3M double sided tape (2) Mounting Bracket Threaded Extension (2) Washers (2) Nuts (1) Mounting Bracket Full Info Here: https://www.revel-usa.com/vls/oil-temp.html Learn More

The Revel VLS Water Temperature gauge monitors temperatures starting from 100 ºF all the way up to 300 ºF. The OLED screen allows for easy readings from any viewing angle, and a 30 LED outer ring for viewing at a quick glance. This kit is included with the water temperature sensor in 1/8 NPT thread pitch for easy installation. The Revel VLS Water Temperature gauge is daisy-chain compatible with the VLS Boost gauge, VLS Oil Temperature gauge, VLS Oil Pressure gauge, and VLS Voltage gauge. The Revel VLS 2 1/16 in. (52mm) gauges allow you to keep tabs on the engine’s vital signs while minimizing the time spent looking away from the road. The OLED display used in the VLS gauges provide a crisp, clear display that does not require a backlight, which allows for an ultra slim profile that maximizes versatility and encourages creative mounting solutions. The numeric OLED display is accompanied by an LED ring around the perimeter of the gauge for readings at a glance. Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge – no need to connect each gauge individually to power. Each gauge comes packaged with the associated sensor, sun shade, mounting bracket, and all necessary wiring. 2 1/16 in. (52mm) diameter gauge 100 ºF to 300 ºF reading Digital OLED display 30 LED outer ring Daisy chain compatible Oil temp sensor included (1/8 NPT thread pitch) Mounting kit included Full Info Here: https://www.revel-usa.com/vls/water-temp.html Learn More

The Revel VLS 2 1/16 in. (52mm) gauges allow you to keep tabs on the engine’s vital signs while minimizing the time spent looking away from the road. The OLED display used in the VLS gauges provide a crisp, clear display that does not require a backlight, which allows for an ultra slim profile that maximizes versatility and encourages creative mounting solutions. The numeric OLED display is accompanied by an LED ring around the perimeter of the gauge for readings at a glance. Revel VLS gauges have been designed to connect in sequence, minimizing wiring to keep your install clean. Once the first gauge is connected, adding another is as easy as plugging in the provided harness to the original gauge and routing it to the additional gauge – no need to connect each gauge individually to power. Each gauge comes packaged with the associated sensor, sun shade, mounting bracket, and all necessary wiring. 2 1/16 in. (52mm) diameter gauge 30 inHG to 45 PSI reading Digital OLED display 30 LED outer ring Daisy chain compatible Boost sensor included Mounting kit included Full Info Here: https://www.revel-usa.com/vls/boost.html Learn More

2JR Parking Sign for your Broke Down QR SpecV ;) 12x9" - .32" Thick Aluminum. Powdercoated White with 2 Colors Only BDSO sign available Ships FREE ground shipping USPS. Or Choose 6.99 for Priority Mail 2-3day service. IN STOCK Learn More

Yellow hi-strength fog lights for all 01-03 Sentra models. Comes with 55w bulb. Bright as hell and no film, the lens is manufactured yellow. You will have to remove the cover on your OEM fogs with the clip to use on these. Easy swap! Fits all GXE and SER and SpecV models. Learn More