Search results for 'ac delete'
-
B14 / B15 / Maxima Panhard Rod - Rear Roll Center Correction
Regular Price: $1,250.00
Special Price $980.00
The height of the rear roll center is critical to handling. When you remove the OEM Link on the Nissan Twist Beam suspension and add a panhard bar the rear roll center drops. A lowered rear roll center promotes side bite at the rear which tends to tighten corner handling. 2J Exclusive! Price includes labor/installation. Panhard rod is not available for shipping. Learn More -
Nissan 55mm Full Race Wheel Studs - fits all models
Regular Price: $5.25
Special Price $3.68
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 25mm of increased track width per side. 55mm, Forged Chromoly SCM435. Also available in 82mm SOLD AS EACH $59 for pack of 16. Learn More -
2JR Billet Wheel Spacers with optional Forged Studs / Lugs
Regular Price: $39.99
Special Price $17.98
2JR wheel spacers give your car improved roll center and better stance. Made from billet 6061, our hub centric come with 67.1mm center bore to fit all Nissans. 10mm is not recommended for the rear of the b15 chassis due to the length of the hub. Double drilled 4x114.3 AND 5x114.3. By adding track width, we dropped our laptimes at Road Atlanta by almost 2 secs. We also saw improved tire wear. All +5mm spacers are hubcentric for perfect fitment - you don't need to add studs other than stock studs. 2JR 55mm studs are required for the 15mm spacers and 82mm studs are suggested for the 20mm spacers. Open Lugs are not required; however, for a race-look add the 2JR forged chromoly Black lug open lug nuts. Solid, built for life - used on our race car. Sold as a pair. Learn More -
10mm Street Traction Spacer (ALK) B15
Regular Price: $95.99
Special Price $49.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, and take control of your car. The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. NOW includes hardened pins and 6 50mm bolts. Learn More -
15mm Race Spec 2JR Traction Spacer (ALK) B15
Regular Price: $139.99
Special Price $69.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, take control of your car. Does what our 10mm spacer does, only better!! The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. Includes hardened pins and 6 50mm bolts. Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro
Regular Price: $159.00
Special Price $110.99
After testing 1 set with excellent results, we have asked SuperPro to make a select set of only 10 sets of axle pivot bushings in 95K durometer for us. This is nearly 300% stronger than their normal Super Pro hardness and have grooved inner races for quiet operation to hold grease. And you reuse your original shell so install is fairly easy. Fits P10, P11, B15, N15, N16 Improve rear balance, turn in and eliminate understeer. Build for the street for no noise and track ready for full stiffness. LIMITED TO JUST 10 SETS. Learn More -
Nissan 82mm Full Race Wheel Studs (fits all models)
Regular Price: $5.99
Special Price $4.25
We were asked to make these for the GTRs (we make their hubcentric wheel spacers) and we are offering these for the Sentras as well. This is a true racing wheel stud with rounded ends for wheel changes without damaging the threads. It also allows you to set your lug nuts on the studs for quick install with an impact gun. All the specs were designed with the GTR in mind, thread length, strength, material and longevity. These aren't black, zinc coated studs that quickly rust. These studs will never rust and can handle 40mm of increased track width. There hasnt been a 12x1.25 with the correct knurl for a Nissan until now. 82mm, Forged Chromoly SCM435. SOLD AS EACH Learn More -
2JR Crossmember Delrin Bushings- Wheel Hop Aid (B13/B14/B15)
Regular Price: $59.99
Special Price $39.99
2002-2006 B15 Sentra 2.5L / Replace the old, worn out rubber OEM crossmember bushings with 2 piece delrin bushings from 2JR. Installed between the crossmember and chassis, at all four attachment points. Delrin absorbs some of the motor vibrations for a smoother ride. Zero flex, holds the motor solidly in place. SOLD as a set of 8 pieces, front and rear crossmember locations Can be used on a B13/14 - if you slightly open up the holes on the B13/14 crossmember. Very simple install
In Stock
Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
B15 Handling Pack - RCK and UPGRADED Bump Steer Kit
Regular Price: $329.99
Special Price $199.98
NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More -
2JR Forged Chromoly Lug Nut - BLACK
Regular Price: $159.99
Special Price $79.99
2JR Releases its new line of Forged Solid Chromoly Lug Nuts for Nissan / Subaru bolt patterns (12x1.25mm) - 35mm Length, Open End, with Knurled Ends for easy grip while installing at the track or street. These are made from billet chromoly for extra long life and durability without the high cost of our Ti lugs at 1/2 the cost. Color is powdercoated black with gold 2JR logo.
-
BC Racing Custom Spec'd Coilovers
Regular Price: $1,250.00
Special Price $1,247.98
Finally, the best coilovers on the market are now available through 2JRacing with custom spring rates and valving to match. No more oversprung/under-dampened coilovers that exude a bouncy ride. BC Racing coilovers provide the perfect balance of handling and performance without being stiff. 4.5 years of racing on our original set with zero leaks or issues. Extremely durable and quiet. Customize your choices to match your driving style and level of performance. Available for a number of performance vehicles (Nissan / Ford / Etc) AVAILABLE MODELS - CHECK HERE: http://www.bcracing-na.com/wp-content/uploads/2014/07/BC-application-list-2014.pdf Ships for $9.89 in the lower 48 states Learn More -
Aurora Bearing Heim Upgrade for the 2JR Bump Steer Kit.
Regular Price: $72.99
Special Price $59.99
2JR upgrade for the bump steer kit. Race spec heim joints with teflon coated inner sleeves. The best heims on the market are now available for the 2JR bump steer kit. NOTE, all bump steer kits MUST USE the RCK tall ball joint to maintain the correct steering geometry. Learn More -
Tein 02-06 Sentra S Tech Springs (B15)
Regular Price: $305.99
Special Price $239.19
Application: All B15 Chassis - 2002 to 2006 (QG and QR engines) Ride Height (F): -1.3in (-34mm) Spring Rate (R): 269lbs/in (4.8kgf/mm) Ride Height (R): -1.1in (-29mm) Spring Rate (F): 168lbs/in (3kgf/mm) TEIN Springs - STech: TEIN S.TECH Spring is an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects. *Features* * One year limited warranty * High-grade material adapted to improve guaranteed satisfaction * Rubber spring protector sheet to prevent noise (most applications) Learn More -
TEIN Springs - HTech
$305.00TEIN Springs - HTech: High Tech is made from a new material called "Vanadium" which is much lighter then other spring and increases flexibility. *Features* * All spring are designed specifically to fit each car for maximum performance * About a 1 inch drop for a more attractive appearance * Comfortable ride quality is still maintained by using the OEM bump rubber and noise protection sheet (available for most model)
Ride Height (F): -0.9in (-24mm)
Ride Height (R): -0.6in (-14mm)
Spring Rate (F): 154lbs/in (2.75kgf/mm)
Spring Rate (R): 246lbs/in (4.4kgf/mm)
** Drop ships from manufacturer
Learn More -
KYB Strut Mount-REAR
Regular Price: $43.09
Special Price $32.99
SOLD AS EACH! KYB Strut Mount: KYB Strut Mounts feature construction and fit that meets or exceeds original equipment specifications and are available for both domestic and import vehicles. Strut mounts play a vital role in improving the vehicles handling, ride control, alignment, braking, and steering and KYB strut mounts and boots are an integral part of proper strut service. They improve the quality of the installation while extending the life of the strut and enhancing the safety and performance of your vehicle.
**Drop ships from manufacturer
***Allow 10-15 days for delivery
Learn More -
KYB Strut Mount-Front Strut Mount & Bearing
Regular Price: $56.00
Special Price $49.89
KYB Strut Mounts: SOLD AS EACH! KYB Strut Mounts feature construction and fit that meets or exceeds original equipment specifications and are available for both domestic and import vehicles. Strut mounts play a vital role in improving the vehicles handling, ride control, alignment, braking, and steering and KYB strut mounts and boots are an integral part of proper strut service. They improve the quality of the installation while extending the life of the strut and enhancing the safety and performance of your vehicle.
Drop ships from manufacturer
Learn More