Search results for 'b15'
-
PRE ORDER 2JR 1.5" Drop Street-Spec Circuit Lowering Springs (01-06 Sentra)
Regular Price: $179.99
Special Price $129.78
After a year of testing to refine the spring rates and ride height, 2JR introduces our own line of street performance springs. Perfect for stock shocks or pair with aftermarket shocks like KYB or Koni Yellows. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance.
Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15. Fits all models 02-06
Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in
Learn More -
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More -
B15 Nismo Rear Sway Bar - Hardware Only
Regular Price: $129.77
Special Price $86.98
Full Hardware and instructions kit for the B15 Nismo Rear Sway Bar. This is the original hardware from Nismo for the Nismo/2JR 25mm Rear Sway Bar. Brand new in the box. All the brackets, bushings, bolts, nuts and washers - along with instructions on setting it up properly. Learn More -
B15 Japan-Spec 555 Steering Tie Rods / Ball Joints - Kit or Pair (02-06)
2JR offers Japan Spec 555 Inner and Outer Tie Rod kits for your B15 (all models). You can also add high spec 555 Ball Joints for long life. These are the highest quality OEM replacement inner and outer tie rods you can buy for your B15. No mods required - bolts right in. Improve your steering response -even better when the B15 was new with 555 parts. Learn More -
2JR Spring Sport Springs with KYB Twin-tube Excel G Shocks - 1.5" Drop
Regular Price: $529.00
Special Price $429.00
The perfect combo! 2JR Sport Springs on KYB Shocks. Drops 1.5" over stock, with a perfect front to rear rake. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance. The progress spring rate allows for comfortable ride quality under normal driving conditions while providing maximum performance when being pushed to the limit.
Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15. Fits all models 02-06
Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in The KYB Twin Tubes are the absolute best product to restore original handling and control KYB's are: Calibrated to compensate for worn suspensions Components and valving are designed specifically for each application Designed to help restore OE performance for normal driving conditions Built with quality that matches or exceeds OE
Learn More -
B15 Sentra ISC N1 Coilovers; Street Sport Series
Regular Price: $1,185.00
Special Price $859.00
The ISC N1 coilover is the optimum suspension tool for improved handling for your street or weekend track car. This product is perfect for someone looking for performance, adjustability (height and dampening) and other quality features. Our self-manufactured ISC N1 allows us to have top grade quality control, and innovative R&D capabilities due to our in house/ self-made company dynamic. ISC has been present for over 12 years in Asia and Australia, which accomplished drift, road course, street enthusiasts and podiums alike. Over a decade of experience and feedback has allowed the ISC N1 to evolve into what it is today. The ISC N1 Basic has all the great features of the regular N1 but has solid top plates instead of a camber plate/ pillowball application in the front. Many street enthusiasts do not need to have adjustable camber plates, so the Basic was made in order to simplify the product and eliminate any feature that may not be used for your average street car that is not going for track performance, or aggressive camber/ stance. The N1 Basic is also more affordable. *Specs:* * 6061 Aluminum * Top Grade Hardware, Pillowball Bearings * StreetSeal (TM) corrosion protectant technology * Anodized Finish * Light weight * Large Adjustment Range *Details:* * SO9001:2000R Certified * ARTC Certified * 5 Year Warranty: All service, rebuilds and warranty support are done here in our USA facility. All custom coilover orders are hand assembled here in our New Hampshire location. ISC reaches to have some of the best customer service in the industry. *32 Step Damper Adjustable:* * Rebound/ Compression adjusted in unison via 32 step adjustment Learn More -
SPC Performance EZ Camber XR Bolts - Pair (B15)
Regular Price: $39.99
Special Price $24.99
SPC Performance EZ Cam XR Bolts (Pair) (Replaces 12mm Bolts) EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Range ±1.75deg Cam Learn More -
SuperPro Hard Steering Rack Bushing (B15)
Regular Price: $66.99
Special Price $54.98
Improve steering feel with the SP hard steering rack bushing. Excellent, inexpensive upgrade to your B15 steering rack (fits all B15s) Learn More -
SuperPro Full Rear Suspension Bushing Kit (B15)
Regular Price: $316.99
Special Price $274.98
Available now - and in stock. Full B15 Rear Suspension SuperPro Bushing Kit. Nearly all B15s on the road today have excessively worn rear bushings which lead to a sloppy feel and poor handling. Upgrade your bushings with the only complete kit on the market. The specially blended Polyurethane used in SuperPro products has specific mechanical properties that make it extremely successful in its applications. The combined properties of extreme resistance to abrasion, low compression set, high tear strength, and a resistance to oils and solvents. This makes SuperPro ideal for most automotive applications, primarily because of the material's tendency to lead to a resilient product that is highly versatile in its various applications. Rear Suspension Benefits - Greatly improved suspension geometry over stock - Enhanced handling & ride characteristics - A safer vehicle with more grip - Superior replacement and repair performance – get back that “new car feel” - Improved tire wear, fuel efficiency and reduced running costs Learn More -
Tein 02-06 Nissan Sentra Street Basis Z Coilovers B15 (all models)
Regular Price: $817.00
Special Price $798.89
TEIN Dampers - Street Basis Z - for all B15 models 1.8L and 2.5L : TEIN Street Basis Damper is the evolution of the popular BASIC coilover model. It incorporates new internal and external components, newly developed coatings and new manufacturing processes.
TEIN engineers have spent many hours developing new seals and internal components to improve durability and product life. This was one of our major goals for the new model.
Newly developed “ZT” coating for improved durability and hassle-free ride height adjustment. TEIN developed this coating in-house after stringent test and analysis procedures. Our engineers tested different coats, application methods, cleaning processes, etc… in our own brine salt water testing machine which simulates heavy solvents/ road salts used in cold weather climates.
Slip-fit threaded adjustment tube. Allows for damper body and threaded sleeve to be thoroughly coated for rust/ corrosion protection.
The slip-fit allows a more thorough coating on the threaded section as well as powder coated damper body.
Revised Aluminum Spring Seat and Delrin Thrust Washer are light weight and durable. This combination allows for smooth ride height adjustment. The new spring seats have a larger contact surface area and eliminate the need for a rubber spring seat.
Learn More -
Tein 02-06 Sentra S Tech Springs (B15)
Regular Price: $305.99
Special Price $239.19
Application: All B15 Chassis - 2002 to 2006 (QG and QR engines) Ride Height (F): -1.3in (-34mm) Spring Rate (R): 269lbs/in (4.8kgf/mm) Ride Height (R): -1.1in (-29mm) Spring Rate (F): 168lbs/in (3kgf/mm) TEIN Springs - STech: TEIN S.TECH Spring is an excellent step towards suspension tuning. They offer approximately a 1.5 inch drop for a more aggressive appearance. Comes with a 1 year limited warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects. *Features* * One year limited warranty * High-grade material adapted to improve guaranteed satisfaction * Rubber spring protector sheet to prevent noise (most applications) Learn More -
B15 Handling Pack - RCK and UPGRADED Bump Steer Kit
Regular Price: $329.99
Special Price $199.98
NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
2JR Crossmember Delrin Bushings- Wheel Hop Aid (B13/B14/B15)
Regular Price: $59.99
Special Price $39.99
2002-2006 B15 Sentra 2.5L / Replace the old, worn out rubber OEM crossmember bushings with 2 piece delrin bushings from 2JR. Installed between the crossmember and chassis, at all four attachment points. Delrin absorbs some of the motor vibrations for a smoother ride. Zero flex, holds the motor solidly in place. SOLD as a set of 8 pieces, front and rear crossmember locations Can be used on a B13/14 - if you slightly open up the holes on the B13/14 crossmember. Very simple install
In Stock
Learn More -
SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro
Regular Price: $159.00
Special Price $110.99
After testing 1 set with excellent results, we have asked SuperPro to make a select set of only 10 sets of axle pivot bushings in 95K durometer for us. This is nearly 300% stronger than their normal Super Pro hardness and have grooved inner races for quiet operation to hold grease. And you reuse your original shell so install is fairly easy. Fits P10, P11, B15, N15, N16 Improve rear balance, turn in and eliminate understeer. Build for the street for no noise and track ready for full stiffness. LIMITED TO JUST 10 SETS. Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
15mm Race Spec 2JR Traction Spacer (ALK) B15
Regular Price: $139.99
Special Price $69.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, take control of your car. Does what our 10mm spacer does, only better!! The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. Includes hardened pins and 6 50mm bolts. Learn More -
10mm Street Traction Spacer (ALK) B15
Regular Price: $95.99
Special Price $49.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, and take control of your car. The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. NOW includes hardened pins and 6 50mm bolts. Learn More