Search results for 'oem kit'
17 Item(s)
Grid List
-
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More -
B15 Nismo Rear Sway Bar - Hardware Only
Regular Price: $129.77
Special Price $86.98
Full Hardware and instructions kit for the B15 Nismo Rear Sway Bar. This is the original hardware from Nismo for the Nismo/2JR 25mm Rear Sway Bar. Brand new in the box. All the brackets, bushings, bolts, nuts and washers - along with instructions on setting it up properly. Learn More -
B15 Japan-Spec 555 Steering Tie Rods / Ball Joints - Kit or Pair (02-06)
2JR offers Japan Spec 555 Inner and Outer Tie Rod kits for your B15 (all models). You can also add high spec 555 Ball Joints for long life. These are the highest quality OEM replacement inner and outer tie rods you can buy for your B15. No mods required - bolts right in. Improve your steering response -even better when the B15 was new with 555 parts. Learn More -
Whiteline Front Sway Bar End Links with Hard Race Bushings
Regular Price: $63.99
Special Price $52.98
Direct Fit - Front Sway Bar End Links with Hard Race Bushings Whiteline Sway Bar Links are adjustable for length via center alloy turnbuckle, suit 10mm ID through-bolt. Kits contains 2x complete link assemblies with dust boots Learn More -
SPC Performance EZ Camber XR Bolts - Pair (B15)
Regular Price: $39.99
Special Price $24.99
SPC Performance EZ Cam XR Bolts (Pair) (Replaces 12mm Bolts) EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Range ±1.75deg Cam Learn More -
SuperPro Full Rear Suspension Bushing Kit (B15)
Regular Price: $316.99
Special Price $274.98
Available now - and in stock. Full B15 Rear Suspension SuperPro Bushing Kit. Nearly all B15s on the road today have excessively worn rear bushings which lead to a sloppy feel and poor handling. Upgrade your bushings with the only complete kit on the market. The specially blended Polyurethane used in SuperPro products has specific mechanical properties that make it extremely successful in its applications. The combined properties of extreme resistance to abrasion, low compression set, high tear strength, and a resistance to oils and solvents. This makes SuperPro ideal for most automotive applications, primarily because of the material's tendency to lead to a resilient product that is highly versatile in its various applications. Rear Suspension Benefits - Greatly improved suspension geometry over stock - Enhanced handling & ride characteristics - A safer vehicle with more grip - Superior replacement and repair performance – get back that “new car feel” - Improved tire wear, fuel efficiency and reduced running costs Learn More -
Energy Suspension Motor Mount Insert 02-06 Sentra BLACK
Regular Price: $62.97
Special Price $42.99
Energy Suspension Motor Mount Insert 02-06 Sentra. Full kit for the 2.5L Crossmember mounts - which handle all the tq load FEATURES: Prevents Tearing Of Original Soft Mount Material A Must-Use For High Performance Conditions Eliminates Excess Engine Movement Energy Suspension is a self-contained company with all services in-house-in order to maintain the highest quality control possible. They have over two decades of in-house experience in innovating, engineering and formulating a wide selection of polyurethane components for many different industries. This has qualified Energy Suspension as a premier manufacturer of the highest quality polyurethane products available today. Excellence is company policy, from the initial design stages, where tolerances, preloads and material formulations are made-through the molding processes, to welding techniques, to hardware selection. Learn More -
Energy Suspension Motor Mount Insert 02-06 Sentra RED
Regular Price: $62.97
Special Price $42.99
Energy Suspension Motor Mount Insert 02-06 Sentra. Full kit for the 2.5L Crossmember mounts - which handle all the tq load FEATURES: Prevents Tearing Of Original Soft Mount Material A Must-Use For High Performance Conditions Eliminates Excess Engine Movement Energy Suspension is a self-contained company with all services in-house-in order to maintain the highest quality control possible. They have over two decades of in-house experience in innovating, engineering and formulating a wide selection of polyurethane components for many different industries. This has qualified Energy Suspension as a premier manufacturer of the highest quality polyurethane products available today. Excellence is company policy, from the initial design stages, where tolerances, preloads and material formulations are made-through the molding processes, to welding techniques, to hardware selection. Learn More -
TEIN Springs - HTech
$305.00TEIN Springs - HTech: High Tech is made from a new material called "Vanadium" which is much lighter then other spring and increases flexibility. *Features* * All spring are designed specifically to fit each car for maximum performance * About a 1 inch drop for a more attractive appearance * Comfortable ride quality is still maintained by using the OEM bump rubber and noise protection sheet (available for most model)
Ride Height (F): -0.9in (-24mm)
Ride Height (R): -0.6in (-14mm)
Spring Rate (F): 154lbs/in (2.75kgf/mm)
Spring Rate (R): 246lbs/in (4.4kgf/mm)
** Drop ships from manufacturer
Learn More -
Aurora Bearing Heim Upgrade for the 2JR Bump Steer Kit.
Regular Price: $72.99
Special Price $59.99
2JR upgrade for the bump steer kit. Race spec heim joints with teflon coated inner sleeves. The best heims on the market are now available for the 2JR bump steer kit. NOTE, all bump steer kits MUST USE the RCK tall ball joint to maintain the correct steering geometry. Learn More -
B15 Handling Pack - RCK and UPGRADED Bump Steer Kit
Regular Price: $329.99
Special Price $199.98
NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
2JR Crossmember Delrin Bushings- Wheel Hop Aid (B13/B14/B15)
Regular Price: $59.99
Special Price $39.99
2002-2006 B15 Sentra 2.5L / Replace the old, worn out rubber OEM crossmember bushings with 2 piece delrin bushings from 2JR. Installed between the crossmember and chassis, at all four attachment points. Delrin absorbs some of the motor vibrations for a smoother ride. Zero flex, holds the motor solidly in place. SOLD as a set of 8 pieces, front and rear crossmember locations Can be used on a B13/14 - if you slightly open up the holes on the B13/14 crossmember. Very simple install
In Stock
Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
B14 / B15 / Maxima Panhard Rod - Rear Roll Center Correction
Regular Price: $1,250.00
Special Price $980.00
The height of the rear roll center is critical to handling. When you remove the OEM Link on the Nissan Twist Beam suspension and add a panhard bar the rear roll center drops. A lowered rear roll center promotes side bite at the rear which tends to tighten corner handling. 2J Exclusive! Price includes labor/installation. Panhard rod is not available for shipping. Learn More
17 Item(s)
Grid List