Search results for '#1 - Street/Strip Spec Includes- Tubular arms, Poly bushings and Rear mount- $54'
Maximum words count is 10. In your search query was cut next part: Rear mount- $54.
-
Focus ST - Borla Stainless Catback Exhaust - Type S
Regular Price: $874.00
Special Price $780.99
Focus ST - Borla Stainless Catback Exhaust BORLA Type-S / Type-S II Cat-Back & Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and a distinctive more aggressive sounding “S-Type” sound - respected by motoring enthusiasts everywhere. From the design characteristics of the inner cores to the amount of sound-absorbing composite filament, all specifications of BORLA® exhaust systems are tuned on a vehicle-by-vehicle basis for an optimum blend of performance and sound. Each system is built from premium 300-series austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you’d expect from the world’s most experienced (and most winning) exhaust brand. Learn More -
Focus ST - Bilstein Coilover Kit - B14 PSS Monotube
Regular Price: $1,375.14
Special Price $929.99
Focus ST - Bilstein Coilover Kit - B14 PSS Monotube The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs. *The product benefits at a glance:* * Threaded body adjustable range of 20 mm * Lowering of approx. 30-50 mm at front and rear * Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions * Aluminum Spring plates and lock nuts * Surface coating using Triple-C-Technology®for long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * BILSTEIN monotube technology, made in Germany Learn More -
Focus ST - MagnaFlow Dual Center Rear Exit Stainless Cat Back Exhaust
Regular Price: $719.43
Special Price $625.99
Focus ST - MagnaFlow Dual Center Rear Exit Stainless Cat Back Exhaust 2.5" Whether you drive a street, off-road or diesel truck/SUV, MagnaFlow has DYNO-PROVEN exhaust systems that are rugged enough to survive grueling Baja racing. Each system is designed to bolt right on and provide years of trouble-free performance. Provides a smooth, deep tone that is suitable for grocery-getting SUV's with casual tow duties to full blown modded drag racing diesel pickups. * Delivers a Smooth, Deep Tone * 100% Stainless Steel * Fully Polished Mufflers * Dyno Proven * Lifetime Warranty Learn More -
BC Racing Custom Spec'd Coilovers
Regular Price: $1,250.00
Special Price $1,247.98
Finally, the best coilovers on the market are now available through 2JRacing with custom spring rates and valving to match. No more oversprung/under-dampened coilovers that exude a bouncy ride. BC Racing coilovers provide the perfect balance of handling and performance without being stiff. 4.5 years of racing on our original set with zero leaks or issues. Extremely durable and quiet. Customize your choices to match your driving style and level of performance. Available for a number of performance vehicles (Nissan / Ford / Etc) AVAILABLE MODELS - CHECK HERE: http://www.bcracing-na.com/wp-content/uploads/2014/07/BC-application-list-2014.pdf Ships for $9.89 in the lower 48 states Learn More -
COBB Cold Air Intake System Redline Carbon Fiber Focus ST / RS
Regular Price: $750.00
Special Price $739.68
COBB Redline Carbon Fiber Cold Air Intake System Vehicle Fitment: - 2013-2018 Focus ST - 2016-2018 Focus RS If you are dreaming of freeing up the airflow and add a level of refinement under the hood of your 2013-2018 Focus ST or 2016-2018 Focus RS without any compromises, you have come to the right place! CJ Pony Parts is pleased to provide you with a brand new COBB Redline Carbon Fiber Cold Air Intake System (793150) for your 2013-2018 Focus ST or 2016-2018 Focus RS. The COBB Ford Focus ST/RS Redline Carbon Fiber Intake is a great way to dress up your engine bay while increasing engine performance at the same time! Features and Benefits: - 3k tow 2x2 Twill Carbon Fiber Construction - Large 3" piping for ideal flow - Pre-Oiled and Re-usable Dual Cone Air Filter - Black 4-ply Silicone Couplers - Black E-Coated 304 Stainless Steel Clamps - Made in the USA The carbon fiber tube and airbox lid are constructed of a 3k tow in a 2x2 twill weave pattern. Everything is held together with black 4-ply silicone couplers accompanied by black e-coated 304 stainless steel hardware. A gloss finish and bespoke Redline-specific badge keeps everything tidy under the hood. Included is a pre-oiled, dual cone, filter to increase airflow and amplify that great turbo sound. This intake is a complete factory replacement all the way to the turbo and is compatible with the original factory tune and all available COBB OTS maps. Tech Tip: To get the maximum performance out of your Focus ST or RS, pair this COBB Carbon Fiber Cold Air Intake System with a COBB Accessport V3 (P/N: AP3FOR001 and AP3FOR004). Learn More -
Cobb Ford 16-18 Focus RS / 13-18 Focus ST Redline Carbon Fiber Air Scoop
Regular Price: $195.00
Special Price $186.78
Cobb Ford 16-18 Focus RS / 13-18 Focus ST Redline Carbon Fiber Air Scoop Fitment Information: 2013-2018 Ford Focus ST 2016-2018 Ford Focus RS This piece channels air from the large grille opening directly into the factory snorkel feeding the stock airbox. Features: 2x2 Twill Carbon Fiber Weave Debossed COBB Logo Easy Installation Installation Guide An increased amount of cooler airflow is key in making the most efficient power out of your Focus ST or Focus RS! Pulling in fresh air from the grill ensures that air entering into the intake system is as close to ambient as possible. Learn More -
Cobb 13-18 Ford Focus ST Cold Air Intake
Regular Price: $395.98
Special Price $369.78
Cobb 13-18 Ford Focus ST Cold Air Intake Fitment Information: 2013-2018 Ford Focus ST The COBB Focus ST Intake maintains the best qualities of the factory intake while improving on the rest, it is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Features: 3" Mandrel Bent Aluminum Tube Powdercoated Wrinkle Black Pre-Oiled Dual Cone Air Filter 4-ply Black Silicone Couplers C.A.R.B. Certified Easy to Intermediate Installation Effort Installation Guide The COBB Focus ST Intake takes a great airbox design and makes it even better! They improved upon the factory airbox ram air ducting by including an oiled dual cone filter to increase airflow and to hear that great turbo sound. The constrained piping to the turbo is replaced with 3" mandrel bent aluminum tubing to maximize air flow and uses custom silicone couplers to fasten everything together. This is the next generation Focus ST Intake which features OEM-like fitment across all model years and an updated wrinkle black powdercoat finish. The COBB Focus ST Intake is the perfect first step towards Stage 2 power levels when paired with the COBB FMIC! Learn More -
Cobb Ford Focus ST Sound Symposer Delete - Stealth Black
Regular Price: $55.00
Special Price $53.78
Cobb Ford Focus ST Sound Symposer Delete - Stealth Black The COBB Sound Symposer Delete kit for the 2013+ Ford Focus ST is a quick and easy solution for not only deleting your sound symposer to allow you to truly hear your car but also adds an easily accessible boost source for future modifications. Features Ford Focus ST Sound Symposer Delete 6061 Aluminum Construction Black Anodized Finish Laser Etched COBB Logo Easily Reversed Back to Stock Uses Factory Hardware Learn More -
2JR 2015+ Focus ST Cowl Induction Intake
Regular Price: $349.99
Special Price $249.98
WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More -
Torque Solution Billet Downpipe Hanger 2013+ Ford Focus ST
Regular Price: $99.99
Special Price $89.99
Torque Solution Billet Downpipe Hanger 2013+ Ford Focus ST Optional: Add 4 exhaust hangers/ Torque Solution Complete Hanger Kit Learn More -
Filter Replacement for 2JR Focus Cowl Intake
Regular Price: $37.99
Special Price $31.99
Filter Replacement for 2JR Focus Cowl Intake Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
02 Sensor 90° Catted De-fouler - Stainless Steel
Regular Price: $35.00
Special Price $26.00
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
Cometic Ford Focus ST .066in Thick MLS Head Gasket
Regular Price: $122.70
Special Price $120.99
The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F. Learn More -
Radium Engineering 2013-Current Ford Focus ST Crankcase Catch Can Kit
Regular Price: $218.45
Special Price $198.99
These installation kits are specifically designed for high performance vehicles. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold and intercooler.The stainless steel filtration media is cleanable and reuseable. The catch cans act as a filter and collect the oil and other sludge and keep it out of vital engine components. Learn More -
BBK 2013-Current Ford Focus ST 2.0L EcoBoost Performance Throttle Body
Regular Price: $499.99
Special Price $485.99
BBK Performance throttle bodies are designed as a direct replacement for the restrictive stock factory throttle body. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. No tune is required and BBK throttle bodies are available for many late model American muscle cars and trucks. Learn More -
Radium Engineering 2013-Current Ford Focus ST Dual Catch Can Kit
Regular Price: $436.95
Special Price $375.99
These installation kits are specifically designed for high performance vehicles. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold and intercooler.The stainless steel filtration media is cleanable and reuseable. The catch cans act as a filter and collect the oil and other sludge and keep it out of vital engine components. Learn More -
Radium Engineering 2013-Current Ford Focus ST/16+ Focus RS PCV Catch Can Kit
Regular Price: $227.95
Special Price $205.99
These installation kits are specifically designed for high performance vehicles. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold and intercooler.The stainless steel filtration media is cleanable and reuseable. The catch cans act as a filter and collect the oil and other sludge and keep it out of vital engine components. Learn More -
aFe BladeRunner 2.5in Red Intercooler Tube Cold Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $220.99
Special Price $215.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More -
aFe BladeRunner 2.5in Red Intercooler Tube Hot Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $262.99
Special Price $255.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More