Search results for '08 spec v'
-
Radium Engineering 2013-Current Ford Focus ST/16+ Focus RS PCV Catch Can Kit
Regular Price: $227.95
Special Price $205.99
These installation kits are specifically designed for high performance vehicles. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold and intercooler.The stainless steel filtration media is cleanable and reuseable. The catch cans act as a filter and collect the oil and other sludge and keep it out of vital engine components. Learn More -
Radium Engineering 2013-Current Ford Focus ST PCV Baffle Plate - Ecoboost - OEM Configuration
Regular Price: $123.45
Special Price $115.99
The Radium Engineering PCV Baffle Plate mounts to the engine block and replaces the factory plastic PCV plate and valve. Compared to the OEM unit, the CNC machined aluminum Radium Engineering PCV plate features an extra baffle to prevent oil sludge from entering the intake system without restricting air flow. Furthermore, there are two 10AN ORB ports machined above both aluminum baffles. *20-0327-01 PCV Baffle Plate, EcoBoost, OEM Configuration* The OEM configuration kit includes all parts necessary for a plug and play installation and can be used with the OEM PCV tubing or with aftermarket Radium catch cans. Because the OEM Ford PCV valve leaks at all boost levels, this kit includes Radium's own 10AN ORB PCV Valve which prevents boost from leaking into the crankcase. No permanent vehicle modifications are required. Exact contents of 20-0327-01 are shown in the picture below. *INCLUDED* * Billet Aluminum PCV Plate with Baffles * Aluminum 10AN ORB PCV Valve * Aluminum 10AN ORB Plug * Rubber 3/8" PCV Hose * EFI and Spring Hose Clamps *20-0327-02 PCV Baffle Plate, EcoBoost* This kit includes ONLY the Radium PCV plate and associated baffles. The twin 10AN ORB ports allow connection of breathers, catch cans, oil return lines, etc. for highly custom installations. *INCLUDED* * Billet Aluminum PCV Plate with Baffles *IMPORTANT: If using with the Radium Engineering Focus RS/ST catch can kits, select the "OEM Configuration" option above. This will install perfectly with the PCV catch can kit and no other parts are needed.* Learn More -
Torque Solution Aluminum Rear Engine Mount Kit - Ford 2013-Current Focus ST/12+ Focus
Regular Price: $133.32
Special Price $115.00
With Torque Solution engine mounts you will see and feel a difference in your vehicle. These mounts are made out of high grade billet aluminum material and steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 70 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions. *Features:* * Improved 60fts * Improved E.T's * Improved Cornering and braking * High grade strong material * 70 durometer urethane * Life Time Warranty Learn More -
aFe BladeRunner 2.5in Red Intercooler Tube Cold Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $220.99
Special Price $215.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More -
aFe BladeRunner 2.5in Red Intercooler Tube Hot Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $262.99
Special Price $255.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More -
aFe Bladerunner 2.5in Intercooler Coupling Replacement kit for 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $241.99
Special Price $235.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More -
aFe Bladerunner 2.5in Intercooler Cold Side Tubes, 2013-Current Ford Focus ST 2.0L (t) *Black*
Regular Price: $199.99
Special Price $190.99
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet. Learn More -
aFe Bladerunner 2.5in Intercooler Hot Side Tubes, 20013-Current Ford Focus ST 2.0L (t) *Black*
Regular Price: $241.99
Special Price $230.99
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet. Learn More -
Mishimoto 2013-Current Ford Focus ST Hot Side Intercooler Pipe Kit - Wrinkle Black
$232.95Open up the flow of the charged air in your 2013+ Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14% increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto?s Lifetime Warranty. Learn More -
Mishimoto 2013-Current Ford Focus ST Hot Side Intercooler Pipe Kit - Polished
$232.95Open up the flow of the charged air in your 2013+ Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends, a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends, but also increased the diameter to 2.5? giving it a 14% increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already, the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat, and is covered under Mishimoto's Lifetime Warranty. Learn More -
aFe BladeRunner 2.5in Red Intercooler Tubes Hot and Cold Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $455.40
Special Price $415.98
The ATLAS exhaust race pipe is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel-bent aluminized tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The ATLAS exhaust race pipe is the perfect combination of performance, fit and value. Learn More -
Mishimoto 2013-Current Ford Focus ST Gold Intercooler w/ Polished Pipes
$1,030.95It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We?ve replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty. Learn More -
Mishimoto 2013-Current Ford Focus ST Intercooler Pipe Kit - Wrinkle Black
$404.95Open up the flow of the charged air in your 2013+ Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum, allowing for a 14% increase in volume and 26% greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don?t stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator.The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013+ Focus ST in conjunction with the Mishimoto Performance intake is a 21% increase in flow of the charged air through the system, and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune. Learn More -
GFB Diverter Valve DV+ Focus ST
Regular Price: $154.80
Special Price $149.98
GFB Diverter Valve DV+ Focus ST Fits All Years: Focus ST (2.0L) GFB DV+ Diverter valve is a direct bolt on factory valve replacement. Designed to replace the weak plastic Bosch diverter valves commonly found on European applications like Audi, Ford and VW, but with the GFB TMS advantage. The TMS range from GFB is designed specifically for the purpose of turbo lag reduction, and improving throttle response. Tests show TMS features can return engine to peak boost up to 30% faster than a factory diverter valve when shifting gears. Unlike other aftermarket Bosch replacement valves on the market, the DV+ will hold as much boost as you can throw at it WITHOUT the need to adjust the spring pre-load or purchase different springs. This is because the pressure-balancing design of the DV+ means that under wide open throttle conditions there is equal boost pressure on both sides of the piston, so it will stay shut under boost REGARDLESS of the spring setting or the boost pressure. Learn More -
GFB DVX Fits Ford Focus ST
Regular Price: $233.10
Special Price $209.78
GFB DVX Fits Ford Focus ST Fits All Years: Focus ST (2.0L) GFB DV+ Diverter valve (Part number T9301) is a direct bolt on factory valve replacement. Designed to replace the weak plastic Bosch diverter valves commonly found on European applications like Audi, Ford and VW, but with the GFB TMS advantage. The TMS range from GFB is designed specifically for the purpose of turbo lag reduction, and improving throttle response. Tests show TMS features can return engine to peak boost up to 30% faster than a factory diverter valve when shifting gears. Unlike other aftermarket Bosch replacement valves on the market, the DV+ will hold as much boost as you can throw at it WITHOUT the need to adjust the spring pre-load or purchase different springs. This is because the pressure-balancing design of the DV+ means that under wide open throttle conditions there is equal boost pressure on both sides of the piston, so it will stay shut under boost REGARDLESS of the spring setting or the boost pressure. Learn More -
Turbosmart IWG75 Ford EcoBoost 7 PSI Black Internal Wastegate Actuator
Regular Price: $184.49
Special Price $165.99
When Turbosmart began making performance products back in 1997, a great amount of effort was put into the design and manufacturing process to ensure our products created a new standard. More hand-crafted than mass-produced, Turbosmart products quickly gained acceptance within the performance community for their quality and reliability. Coupled with extraordinary service and after-sales support, Turbosmart quickly became one of the most sought-after names in the industry. Not much has changed since then. Although our product line and the company itself have grown considerably, the products are still designed and manufactured in our factory in Sydney, Australia, using the same tried and proven formula of innovative design, strict quality control, and rigorous testing. We have invested in our research facility manufacturing equipment and staff training to ensure our products continue to perform up to and beyond your expectations. At Turbosmart, we do not believe in cutting corners and half-measures. We do not accept anything short of perfection - and neither should you. Learn More -
Turbosmart Kompact Plumb Back Valve BOV (Quiet) - Focus ST
Regular Price: $169.98
Special Price $154.78
Turbosmart Kompact Plumb Back Valve BOV (Quiet) - Focus ST Fits All Years: Focus ST (2.0L) Like all Turbosmart blow off valves, the new Kompact Shorties have been machined in-house, from solid billet aluminium. Keeping the process in-house, ensures only the best quality, and none of the cracking or leaking that plague the factory plastic valves. Like their predecessors, they’ve been engineered with a light-weight, brass/aluminium, two-piece piston. Carefully engineered springs make these the most responsive valves of their kind. Small design means Shortie is easy to install. All billet construction, and well-designed internals mean it will hold as much boost as you want to throw at it, for as long as you need it to. The Plumb Back version is as quiet as a factory valve, or if you’re looking to make a little noise, the Dual Port version’s superior flow characteristics will safely provide that BOV sound you’re looking for. The new twin fixed ports flow more than ever before. You just can’t lose with Turbosmart’s Shortie. Learn More -
Turbosmart BOV Kompact Dual Port (Louder) - Focus ST
Regular Price: $179.98
Special Price $162.78
Turbosmart BOV Kompact Dual Port (Louder) - Focus ST Fits All Years: Focus ST (2.0L) Like all Turbosmart blow off valves, the new Kompact Shorties have been machined in-house, from solid billet aluminium. Keeping the process in-house, ensures only the best quality, and none of the cracking or leaking that plague the factory plastic valves. Like their predecessors, they’ve been engineered with a light-weight, brass/aluminium, two-piece piston. Carefully engineered springs make these the most responsive valves of their kind. The Kompact Shortie fits a huge range of turbos, and their tiny dimensions make them a breeze to fit. To make things even easier, Shorties are supplied with both a swivel “banjo” nipple and a straight nipple, meaning you can tailor the valve to better suit your application. Larger o-rings have been fitted in the base to aid ease of installation – another modification made after talking to our authorized dealers and installers. Small design means Shortie is easy to install. All billet construction, and well-designed internals mean it will hold as much boost as you want to throw at it, for as long as you need it to. The Plumb Back version is as quiet as a factory valve, or if you’re looking to make a little noise, the Dual Port version’s superior flow characteristics will safely provide that BOV sound you’re looking for. The new twin fixed ports flow more than ever before. You just can’t lose with Turbosmart’s Shortie. Learn More -
Non Turbo/HB Focus 2.0 L MagnaFlow Ford Focus L4 2.0L HB Single Straight P/S Rear Exit Stainless Cat Back Perf Exhaust
Regular Price: $910.00
Special Price $845.00
Does not fit ST/Non-Turbo Models Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Touring Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Learn More -
Stainless Works 2013-Current Ford Focus ST 3in High-Flow Cats Downpipe Factory Connection
Regular Price: $889.20
Special Price $802.99
2013-Current Ford Focus ST 2.0L 3" catted downpipe. Includes hangers and flex joint. This 3" downpipe is fully 3" front to back with V-Band flange at the turbo and two bolt flange at the catback factory connection point. Works with OEM or Stainless Works catback (FC13CB-RT, FC13CB-WT) Learn More