Search results for '05 Nissan altima ser'
-
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90
Regular Price: $86.98
Special Price $78.97
LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Comes in a kit - 3L (3 1L Bottles) Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals. Used exclusively in Nissan, Toyota, Scion, Subaru Transmissions and Differentials where GL4/5 is required/recommended Learn More -
BC Racing Custom Spec'd Coilovers
Regular Price: $1,250.00
Special Price $1,247.98
Finally, the best coilovers on the market are now available through 2JRacing with custom spring rates and valving to match. No more oversprung/under-dampened coilovers that exude a bouncy ride. BC Racing coilovers provide the perfect balance of handling and performance without being stiff. 4.5 years of racing on our original set with zero leaks or issues. Extremely durable and quiet. Customize your choices to match your driving style and level of performance. Available for a number of performance vehicles (Nissan / Ford / Etc) AVAILABLE MODELS - CHECK HERE: http://www.bcracing-na.com/wp-content/uploads/2014/07/BC-application-list-2014.pdf Ships for $9.89 in the lower 48 states Learn More -
Ford Focus ST Stage 1 Power Package w/V3
Regular Price: $750.00
Special Price $745.00
Ford Focus ST Stage 1 Power Package w/V3 The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light! Learn More -
Cobb Ford Focus ST Sound Symposer Delete - Stealth Black
Regular Price: $55.00
Special Price $53.78
Cobb Ford Focus ST Sound Symposer Delete - Stealth Black The COBB Sound Symposer Delete kit for the 2013+ Ford Focus ST is a quick and easy solution for not only deleting your sound symposer to allow you to truly hear your car but also adds an easily accessible boost source for future modifications. Features Ford Focus ST Sound Symposer Delete 6061 Aluminum Construction Black Anodized Finish Laser Etched COBB Logo Easily Reversed Back to Stock Uses Factory Hardware Learn More -
2JR 2015+ Focus ST Cowl Induction Intake
Regular Price: $349.99
Special Price $249.98
WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More -
Comp Clutch 13-18 Ford Focus ST Stage 3 Segmented Ceramic Clutch Kit / Flywheel
Regular Price: $921.88
Special Price $899.98
Comp Clutch 13-18 Ford Focus ST Stage 3 Segmented Ceramic Clutch Kit / Flywheel This segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to a 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300-mile break-in is recommended with this setup. The 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings,, all applicable bearings, and the appropriate alignment tool. DETAILS: 150% increase in torque capacity Ideal for street or race use CONTENTS INCLUDE: Performance pressure plate 4140 Forged Steel Flywheel Flywheel bolts High-torque sprung disc with segmented ceramic facings Alignment tool Learn More -
Radium Engineering 2013-Current Ford Focus ST/16+ Focus RS PCV Catch Can Kit
Regular Price: $227.95
Special Price $205.99
These installation kits are specifically designed for high performance vehicles. An oil catch can is essential on a performance vehicle to protect the engine from elevated levels of crankcase blow-by accumulated from aggressive driving. Excess oil saturated air circulating back into the air intake stream can lead to degraded performance. Unlike many catch cans on the market, this catch can features an integrated oil separator that accelerates oil condensation. This cleans the PCV gasses and reduces the oil build-up on the inside of the intake tract and intake manifold and intercooler.The stainless steel filtration media is cleanable and reuseable. The catch cans act as a filter and collect the oil and other sludge and keep it out of vital engine components. Learn More -
Turbosmart IWG75 Ford EcoBoost 7 PSI Black Internal Wastegate Actuator
Regular Price: $184.49
Special Price $165.99
When Turbosmart began making performance products back in 1997, a great amount of effort was put into the design and manufacturing process to ensure our products created a new standard. More hand-crafted than mass-produced, Turbosmart products quickly gained acceptance within the performance community for their quality and reliability. Coupled with extraordinary service and after-sales support, Turbosmart quickly became one of the most sought-after names in the industry. Not much has changed since then. Although our product line and the company itself have grown considerably, the products are still designed and manufactured in our factory in Sydney, Australia, using the same tried and proven formula of innovative design, strict quality control, and rigorous testing. We have invested in our research facility manufacturing equipment and staff training to ensure our products continue to perform up to and beyond your expectations. At Turbosmart, we do not believe in cutting corners and half-measures. We do not accept anything short of perfection - and neither should you. Learn More -
Non Turbo/HB Focus 2.0 L MagnaFlow Ford Focus L4 2.0L HB Single Straight P/S Rear Exit Stainless Cat Back Perf Exhaust
Regular Price: $910.00
Special Price $845.00
Does not fit ST/Non-Turbo Models Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Touring Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Learn More -
Stainless Works 2013-Current Ford Focus ST 3in Catback Vintage Round Muffler Wide Tip
Regular Price: $887.78
Special Price $849.99
2013-Current Ford Focus ST 2.0L 304 SS 3" Catback Exhaust with vintage round muffler and a laser cut, mirror polished 304 SS wide tip. Includes hangers and clamps, and adapters and mates to the factory connection point. Includes a second flanged adapter for 3" diameter inlet that fits up to Stainless Works Downpipe (FC13DP, FC13DPCAT) to make a full 3" system. Learn More -
MBRP 2013-Current Ford Focus ST 2.0L EcoBoost Dual Center Outlet T304 3in Cat Back
$699.99For the serious performance enthusiast who demands the best of the best. For your vehicle, there is no better stainless steel than T304 and no better system than the MBRP Pro Series. With the highest chromium and nickle content of any exhaust, this is simply the best system money can buy. The MBRP Pro Series exhaust comes mirror polished and includes dual wall T304 stainless steel tip(s). Learn More -
Borla 2012-Current Ford Focus SE Hatchback w/o Sport Package 2.0L 4cyl SS Catback Exhaust
Regular Price: $699.99
Special Price $690.99
The BORLA® sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA® exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA®, we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA® engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA® exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound. Learn More -
aFe Takeda Stage-2 Pro DRY S Cold Air Intake Ford Focus ST 2015-2019 L4-2.0L (t) EcoBoost
Regular Price: $405.00
Special Price $400.99
Fits 2015-2019 Focus ST Only Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation. Learn More -
aFe Takeda Stage-2 Pro 5R CAI Ford Focus ST 2013-2014 ONLY L4-2.0L (t) EcoBoost
Regular Price: $402.99
Special Price $400.99
Fits the 2013-2014 Focus ST Only The all new Takeda Retain Intake System produces up to 9HP and 9lbs. x ft. of torque over stock, while outflowing the factory intake by 24%. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. Learn More -
Mishimoto 2013-2014 (ONLY) Ford Focus ST 2.0L Performance Air Intake Kit - Polished
$413.95Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
K&N Performance Intake Kit for Ford Focus
Regular Price: $155.00
Special Price $150.99
As with every K&N kit, when you bolt-on a K&N 57i Performance Induction Kit, you will notice the difference the next time you drive your vehicle. K&N 57i Performance Induction Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too. K&N 57i Performance Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. * Gen I K&N 57i Gen I Induction Kits take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box.. * Gen II K&N 57i Generation II Induction Kits are built primarily for European vehicles. FEATURES * Designed to increase HP and Acceleration * Engineered to Specific Vehicle Design * Easy to Install, Usually in 90 minutes or less! * Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) * Million Mile Limited Warranty * Replaces OEM Filter and Air Box * Air Filter is Washable and Reusable * Works with Original Equipment Manufacturer Computer Systems Learn More -
2JR 2013-2014 Focus ST Cowl Induction Intake
Regular Price: $349.99
Special Price $279.98
WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. - Powder coating adds 15-20 days. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More -
Focus ST - Baffled Oil Catch Can, PCV Side
Regular Price: $245.00
Special Price $190.99
Focus ST - Baffled Oil Catch Can, PCV Side Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter Application specific bracket mounts Black hoses come pre-molded for reliable install Catch Can conveniently located next to the transmission Billet 6061 aluminum sealed can Defends intercooler, intake system, and essential components from oil blow-by Helps reduce carbon build-up on the intake valves Helps maintain proper octane levels to reduce potential detonation Filters and can are fully serviceable Internal air diverter turbulates air longer to improve oil separation Mishimoto Lifetime Warranty Learn More -
Focus ST - Borla Stainless Catback Exhaust - Type S
Regular Price: $874.00
Special Price $780.99
Focus ST - Borla Stainless Catback Exhaust BORLA Type-S / Type-S II Cat-Back & Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and a distinctive more aggressive sounding “S-Type” sound - respected by motoring enthusiasts everywhere. From the design characteristics of the inner cores to the amount of sound-absorbing composite filament, all specifications of BORLA® exhaust systems are tuned on a vehicle-by-vehicle basis for an optimum blend of performance and sound. Each system is built from premium 300-series austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you’d expect from the world’s most experienced (and most winning) exhaust brand. Learn More