Search results for '70mm plate'

Mishimoto 13+ Ford Focus ST Thermostatic Oil Cooler Kit Fits all Focus ST (all years) Turbocharged, high stress 4 cylinder engines like the 2.0L EcoBoost engine in the Focus ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-liquid head exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution to your Focus ST! The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was mounted on the passenger side as to not interfere with some aftermarket air intake systems. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 30 F (16.7 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Focus ST Oil Cooler - Benefits: https://www.youtube.com/watch?v=bngb10smBvs Install Instructions: https://www.youtube.com/watch?v=5R5wBmrT8DM&feature=youtu.be Learn More

Ford Stage 1 Drivetrain Package (Exterior) Focus ST 2013-2018, Focus RS 2016-2018 The Stage 1 Drivetrain Package Includes: Adjustable Shift Plate, Shifter Cable Bracket Bushings, Shifter Cable Bushings. Ford Adjustable Shift Plate Ford Shifter Cable Bracket Bushings Ford Shift Cable Bushings Learn More

WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More

Comp Clutch 13-18 Ford Focus ST Stage 3 Segmented Ceramic Clutch Kit / Flywheel This segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to a 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300-mile break-in is recommended with this setup. The 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings,, all applicable bearings, and the appropriate alignment tool. DETAILS: 150% increase in torque capacity Ideal for street or race use CONTENTS INCLUDE: Performance pressure plate 4140 Forged Steel Flywheel Flywheel bolts High-torque sprung disc with segmented ceramic facings Alignment tool Learn More

The Radium Engineering PCV Baffle Plate mounts to the engine block and replaces the factory plastic PCV plate and valve. Compared to the OEM unit, the CNC machined aluminum Radium Engineering PCV plate features an extra baffle to prevent oil sludge from entering the intake system without restricting air flow. Furthermore, there are two 10AN ORB ports machined above both aluminum baffles. *20-0327-01 PCV Baffle Plate, EcoBoost, OEM Configuration* The OEM configuration kit includes all parts necessary for a plug and play installation and can be used with the OEM PCV tubing or with aftermarket Radium catch cans. Because the OEM Ford PCV valve leaks at all boost levels, this kit includes Radium's own 10AN ORB PCV Valve which prevents boost from leaking into the crankcase. No permanent vehicle modifications are required. Exact contents of 20-0327-01 are shown in the picture below. *INCLUDED* * Billet Aluminum PCV Plate with Baffles * Aluminum 10AN ORB PCV Valve * Aluminum 10AN ORB Plug * Rubber 3/8" PCV Hose * EFI and Spring Hose Clamps *20-0327-02 PCV Baffle Plate, EcoBoost* This kit includes ONLY the Radium PCV plate and associated baffles. The twin 10AN ORB ports allow connection of breathers, catch cans, oil return lines, etc. for highly custom installations. *INCLUDED* * Billet Aluminum PCV Plate with Baffles *IMPORTANT: If using with the Radium Engineering Focus RS/ST catch can kits, select the "OEM Configuration" option above. This will install perfectly with the PCV catch can kit and no other parts are needed.* Learn More

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet. Learn More

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet. Learn More

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We?ve replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty. Learn More

WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. - Powder coating adds 15-20 days. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More

Focus ST - Bilstein Coilover Kit - B14 PSS Monotube The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs. *The product benefits at a glance:* * Threaded body adjustable range of 20 mm * Lowering of approx. 30-50 mm at front and rear * Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions * Aluminum Spring plates and lock nuts * Surface coating using Triple-C-Technology®for long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * BILSTEIN monotube technology, made in Germany Learn More