Search results for: 'long tube header'

Focus ST - Bilstein Coilover Kit - B14 PSS Monotube

Regular Price: $1,375.14

Special Price $929.99

Focus ST - Bilstein Coilover Kit - B14 PSS Monotube The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs. *The product benefits at a glance:* * Threaded body adjustable range of 20 mm * Lowering of approx. 30-50 mm at front and rear * Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions * Aluminum Spring plates and lock nuts * Surface coating using Triple-C-Technology®for long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * BILSTEIN monotube technology, made in Germany Learn More

COBB Cold Air Intake System Redline Carbon Fiber Focus ST / RS

Regular Price: $750.00

Special Price $739.68

COBB Redline Carbon Fiber Cold Air Intake System Vehicle Fitment: - 2013-2018 Focus ST - 2016-2018 Focus RS If you are dreaming of freeing up the airflow and add a level of refinement under the hood of your 2013-2018 Focus ST or 2016-2018 Focus RS without any compromises, you have come to the right place! CJ Pony Parts is pleased to provide you with a brand new COBB Redline Carbon Fiber Cold Air Intake System (793150) for your 2013-2018 Focus ST or 2016-2018 Focus RS. The COBB Ford Focus ST/RS Redline Carbon Fiber Intake is a great way to dress up your engine bay while increasing engine performance at the same time! Features and Benefits: - 3k tow 2x2 Twill Carbon Fiber Construction - Large 3" piping for ideal flow - Pre-Oiled and Re-usable Dual Cone Air Filter - Black 4-ply Silicone Couplers - Black E-Coated 304 Stainless Steel Clamps - Made in the USA The carbon fiber tube and airbox lid are constructed of a 3k tow in a 2x2 twill weave pattern. Everything is held together with black 4-ply silicone couplers accompanied by black e-coated 304 stainless steel hardware. A gloss finish and bespoke Redline-specific badge keeps everything tidy under the hood. Included is a pre-oiled, dual cone, filter to increase airflow and amplify that great turbo sound. This intake is a complete factory replacement all the way to the turbo and is compatible with the original factory tune and all available COBB OTS maps. Tech Tip: To get the maximum performance out of your Focus ST or RS, pair this COBB Carbon Fiber Cold Air Intake System with a COBB Accessport V3 (P/N: AP3FOR001 and AP3FOR004). Learn More

Cobb 13-18 Ford Focus ST Cold Air Intake

Regular Price: $395.98

Special Price $369.78

Cobb 13-18 Ford Focus ST Cold Air Intake Fitment Information: 2013-2018 Ford Focus ST The COBB Focus ST Intake maintains the best qualities of the factory intake while improving on the rest, it is a bold, performance driven addition to your vehicle that will add a kick to your overall driving experience. Features: 3" Mandrel Bent Aluminum Tube Powdercoated Wrinkle Black Pre-Oiled Dual Cone Air Filter 4-ply Black Silicone Couplers C.A.R.B. Certified Easy to Intermediate Installation Effort Installation Guide The COBB Focus ST Intake takes a great airbox design and makes it even better! They improved upon the factory airbox ram air ducting by including an oiled dual cone filter to increase airflow and to hear that great turbo sound. The constrained piping to the turbo is replaced with 3" mandrel bent aluminum tubing to maximize air flow and uses custom silicone couplers to fasten everything together. This is the next generation Focus ST Intake which features OEM-like fitment across all model years and an updated wrinkle black powdercoat finish. The COBB Focus ST Intake is the perfect first step towards Stage 2 power levels when paired with the COBB FMIC! Learn More

Ford Focus ST Stage 1 Power Package w/V3

Regular Price: $750.00

Special Price $745.00

Ford Focus ST Stage 1 Power Package w/V3 The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! The COBB Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB RMM utilizes unique voids custom molded into the 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount with zinc hardware will make you sad you have to hide it under your car, but you will be grinning at every stop light! Learn More

2JR 2015+ Focus ST Cowl Induction Intake

Regular Price: $349.99

Special Price $249.98

WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More

Filter Replacement for 2JR Focus Cowl Intake

Regular Price: $37.99

Special Price $31.99

Filter Replacement for 2JR Focus Cowl Intake Learn More

aFe BladeRunner 2.5in Red Intercooler Tube Cold Side 2013-Current Ford Focus ST 2.0L (t)

Regular Price: $220.99

Special Price $215.99

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More

aFe BladeRunner 2.5in Red Intercooler Tube Hot Side 2013-Current Ford Focus ST 2.0L (t)

Regular Price: $262.99

Special Price $255.99

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More

aFe Bladerunner 2.5in Intercooler Cold Side Tubes, 2013-Current Ford Focus ST 2.0L (t) Black

Regular Price: $199.99

Special Price $190.99

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet. Learn More

aFe Bladerunner 2.5in Intercooler Hot Side Tubes, 20013-Current Ford Focus ST 2.0L (t) Black

Regular Price: $241.99

Special Price $230.99

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Dont waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet. Learn More

Mishimoto 2013-Current Ford Focus ST Gold Intercooler w/ Polished Pipes

$1,030.95

It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We?ve replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty. Learn More

Turbosmart Kompact Plumb Back Valve BOV (Quiet) - Focus ST

Regular Price: $169.98

Special Price $154.78

Turbosmart Kompact Plumb Back Valve BOV (Quiet) - Focus ST Fits All Years: Focus ST (2.0L) Like all Turbosmart blow off valves, the new Kompact Shorties have been machined in-house, from solid billet aluminium. Keeping the process in-house, ensures only the best quality, and none of the cracking or leaking that plague the factory plastic valves. Like their predecessors, they’ve been engineered with a light-weight, brass/aluminium, two-piece piston. Carefully engineered springs make these the most responsive valves of their kind. Small design means Shortie is easy to install. All billet construction, and well-designed internals mean it will hold as much boost as you want to throw at it, for as long as you need it to. The Plumb Back version is as quiet as a factory valve, or if you’re looking to make a little noise, the Dual Port version’s superior flow characteristics will safely provide that BOV sound you’re looking for. The new twin fixed ports flow more than ever before. You just can’t lose with Turbosmart’s Shortie. Learn More

Turbosmart BOV Kompact Dual Port (Louder) - Focus ST

Regular Price: $179.98

Special Price $162.78

Turbosmart BOV Kompact Dual Port (Louder) - Focus ST Fits All Years: Focus ST (2.0L) Like all Turbosmart blow off valves, the new Kompact Shorties have been machined in-house, from solid billet aluminium. Keeping the process in-house, ensures only the best quality, and none of the cracking or leaking that plague the factory plastic valves. Like their predecessors, they’ve been engineered with a light-weight, brass/aluminium, two-piece piston. Carefully engineered springs make these the most responsive valves of their kind. The Kompact Shortie fits a huge range of turbos, and their tiny dimensions make them a breeze to fit. To make things even easier, Shorties are supplied with both a swivel “banjo” nipple and a straight nipple, meaning you can tailor the valve to better suit your application. Larger o-rings have been fitted in the base to aid ease of installation – another modification made after talking to our authorized dealers and installers. Small design means Shortie is easy to install. All billet construction, and well-designed internals mean it will hold as much boost as you want to throw at it, for as long as you need it to. The Plumb Back version is as quiet as a factory valve, or if you’re looking to make a little noise, the Dual Port version’s superior flow characteristics will safely provide that BOV sound you’re looking for. The new twin fixed ports flow more than ever before. You just can’t lose with Turbosmart’s Shortie. Learn More

2JR 2013-2014 Focus ST Cowl Induction Intake

6 Review(s) | Add Your Review

Regular Price: $349.99

Special Price $279.98

WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. - Powder coating adds 15-20 days. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More

Mishimoto 13+ Ford Focus ST Thermostatic Oil Cooler Kit

Regular Price: $798.89

Special Price $679.77

Mishimoto 13+ Ford Focus ST Thermostatic Oil Cooler Kit Fits all Focus ST (all years) Turbocharged, high stress 4 cylinder engines like the 2.0L EcoBoost engine in the Focus ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-liquid head exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution to your Focus ST! The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was mounted on the passenger side as to not interfere with some aftermarket air intake systems. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 30 F (16.7 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Focus ST Oil Cooler - Benefits: https://www.youtube.com/watch?v=bngb10smBvs Install Instructions: https://www.youtube.com/watch?v=5R5wBmrT8DM&feature=youtu.be Learn More

aFe BladeRunner 2.5in Red Intercooler Tubes Hot and Cold Side 2013-Current Ford Focus ST 2.0L (t)

Regular Price: $455.40

Special Price $415.98

The ATLAS exhaust race pipe is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel-bent aluminized tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The ATLAS exhaust race pipe is the perfect combination of performance, fit and value. Learn More

Mishimoto 2013-2014 (ONLY) Ford Focus ST 2.0L Performance Air Intake Kit - Polished

$413.95

Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More

LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90

Regular Price: $86.98

Special Price $78.97

LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Comes in a kit - 3L (3 1L Bottles) Fully synthetic hypoid gear oil, ideally suited for high performance applications even under extreme loads and operating conditions. Ensures maximum wear protection and promotes precise functionality over a wide temperature range and enables longer oil change intervals. Used exclusively in Nissan, Toyota, Scion, Subaru Transmissions and Differentials where GL4/5 is required/recommended Learn More

Focus ST - Baffled Oil Catch Can, PCV Side

Regular Price: $245.00

Special Price $190.99

Focus ST - Baffled Oil Catch Can, PCV Side Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter Application specific bracket mounts Black hoses come pre-molded for reliable install Catch Can conveniently located next to the transmission Billet 6061 aluminum sealed can Defends intercooler, intake system, and essential components from oil blow-by Helps reduce carbon build-up on the intake valves Helps maintain proper octane levels to reduce potential detonation Filters and can are fully serviceable Internal air diverter turbulates air longer to improve oil separation Mishimoto Lifetime Warranty Learn More

Focus ST - aFe Bladerunner 2.5" Intercooler Hot and Cold Side Tubes Black

Regular Price: $425.00

Special Price $365.99

Focus ST - aFe Bladerunner 2.5" Intercooler Hot and Cold Side Tubes Black Learn More

Search results for 'long tube header'