Search results for '00 nissan sentra se'
-
Nissan Sentra 2.5L ECU
Regular Price: $399.98
Special Price $349.98
Nissan Sentra 2.5L ECU Used/Tested ECUs for Nissan Sentra 2.5L 2002-2006 QR25DE SpecV 2.5L These can come STOCK or UpRev Flashed with a tune (NON TURBO ONLY). If your car has NATS (P8, GU, R5) the ECU WILL NOT WORK UNLESS the dealer codes the key to the new ECU or you select UPREV Flashed in the options and we turn off the security in the ECU. ECUs are tested before shipment. No returns. Learn More -
UpRev MAF GT
Regular Price: $399.98
Special Price $379.98
UpRev MAF GT The UpRev MAF GT is an upgraded sensor for Nissan Vehicles. The sensor retains the same connector and pin-out as vehicles using the following part numbers Fits 2004-2012 QR25DE Sentra / Altima and Frontier 2003-2017 350/370Z 2011-2017 Nissan Juke Nissan – 22680-7S000 Hitachi – W0133-1723137 Hitachi – MAF0031 This sensor is not a factory replacement, ECU calibration is required in order to use the UpRev GT MAF. The GT MAF voltage scale has been changed to suite higher airflow and so the ECU should be calibrated to suit the different voltage curve. This MAF is capable of reading up to 600hp on a factory 350Z VQ35DE MAF housing, can read higher numbers with a bigger MAF housing. 3" or Larger MAF housing is preferred. Learn More -
Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology
Regular Price: $317.98
Special Price $291.78
Injen 07-12 Nissan Sentra 2.0L Polished Cold Air Intake w/ MR Technology B16 2.0L ONLY! Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More -
BorgWarner EFR 6258 Turbo
Regular Price: $1,564.78
Special Price $1,199.78
Out of stock
BorgWarner EFR 6258 Turbo BorgWarner EFR 6258 is the fastest Spooling EFR Turbo.. Ideal for small engines (2.5L) in single OR twin turbo configuration, this is an excellent turbocharger for autocross, rally, drift, road racing and street driven applications. A direct plug-n-play for SR20DET, its also popular for Subaru WRX and Nissan Sentra SpecVs. The 62mm OD compressor has a 49.6mm inducer rated at 44lb/min max flow – supporting up to 440hp. This compressor wheel is versatile with very large map width for outstanding power potential, even at high boost. The low inertia 58mm Gamma-Ti turbine wheel is optimally matched for maximum response and fast spool with the FMW compressor wheel. EFR 6258 uses the smallest-sized EFR compressor housing, making fitment in the tightest engine bays possible. Ideal for use in single turbo applications for the 260-440hp range, or as twin turbo applications 500-800+hp. Ceramic Ball Bearing only, watercooling recommended but not mandatory. COMPRESSOR SPECIFICATIONS Compressor Type: Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 62mm Compressor Wheel Inducer: 49.6mm Max Flow Rate: 44 lb/min Built-in BOV: All EFR compressor housings incorporate an integrated BOV. Compressor Housing: 2.5″ inlet, 2.0″ hose coupler outlet. TURBINE SPECIFICATIONS Turbine Wheel Material: Low Inertia Gamma-Ti Turbine Wheel Turbine Wheel OD: 58mm (recommended) OR 55mm Turbine Housing Material: Stainless Steel Sand Cast Housing Turbine outlet: GT-Vband (aka small 3″ vband) ~92mm OD for all EFR turbos FEATURES Dual Row Ceramic Ball Bearings – lowest friction and fastest spool/response, most extreme durability, built-in 2mm oil restrictor Watercooled Center Section – watercooling is recommended, 14mm banjo bolts Learn More -
OEM Nissan Factory Nismo RS Clutch Kit (Juke / B17)
Regular Price: $1,279.98
Special Price $829.78
OEM Nissan Clutch Kit (Juke / B17) Application: Fits All Models Nissan Juke with MR16DDT (1.6L) Manual Fits All Models Nissan B17 Sentra SR / Nismo MR16DDT (1.6L) Manual OEM Part Numbers: 12310-3YV0A: $1,084.77 Flywheel 30100-1KCOA: $214.86 Disk 30210-1KC0C: $234.85 Pressure Plate OEM New Nissan Complete Clutch Kit. Includes Flywheel, Disk, Pressure Plate and Pressure Plate Bolts. Optional - OEM LUK Concentric Slave Unit Removed from New Nismo RS Engines. Learn More -
B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake
Regular Price: $399.98
Special Price $379.98
B15 (02-06) AEM Nissan Sentra SE-R Red Cold Air Intake 2.5L (02-06) Sentra Models CARB EO #: D-670-15 Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. Learn More -
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC
Regular Price: $1,679.98
Special Price $1,498.78
Stage 3 - SR / Nismo Catback + Midpipe + CAI + FMIC Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake 2JR Full FMIC with Hard Piping Kit Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Prothane 02-06 Nissan Sentra SE-R Rear Motor Mount Insert - Red
Regular Price: $45.97
Special Price $42.69
Prothane 02-06 Nissan Sentra SE-R Rear Motor Mount Insert - Red Serves as an upgrade to your old, worn-out mounts Precision-formed for solid fit Made with sturdy, superior-quality polyurethane that far outperforms rubber Provides ideal stiffness and encourages better handling and performance **You must press out your old mount and press in the Prothane** Mount is on the Rear of the crossmember Learn More -
Prothane 02-06 Nissan Sentra SE-R Front Motor Mount Insert - Red
Regular Price: $39.63
Special Price $34.77
Prothane 02-06 Nissan Sentra SE-R Front Motor Mount Insert - Red Serves as an upgrade to your old, worn-out mounts Precision-formed for solid fit Made with sturdy, superior-quality polyurethane that far outperforms rubber Provides ideal stiffness and encourages better handling and performance **You must press out your old mount and press in the Prothane** Mount is on the front of the crossmember Learn More -
Fidanza 2007+ Nissan Sentra Spec-V Short Throw Shifter (B16)
Regular Price: $129.96
Special Price $124.16
Fidanza 2007+ Nissan Sentra Spec-V Short Throw Shifter (B16) Fidanza Performance offers a large line of short throw shifters for both Import and Domestic applications. Fidanzas short shift kits are made precisely with 6061 aluminum and hardened steel. Many Fidanza shifters include all necessary hardware for installation, depending on application. Fits all B16 SpecVs from 2007-2012 Learn More -
MagnaFlow 02-06 Nisssan Altima/Sentra V4 2.5L Manifold Direct Fit Catalytic Converter
Regular Price: $1,102.98
Special Price $1,058.96
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50805. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2006 Nissan Altima and 2002-2006 Nissan Sentra, this direct-fit catalytic converter also interchanges with OE parts 14002-9J310, 14002-9J30B, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems. Learn More -
JE RTR High Comp Piston Set - QR25 (10.8-1)
Regular Price: $821.98
Special Price $782.19
JE High Comp Piston Set - QR25 Fits ALL QR25s / Bore 89.0mm, Stroke 100mm, Rod Length 143mm, Flat Top -0.6cc, Grams 338, Set of 4 Compression Ratio: 10.8:1 JE Pistons are machined by the most advanced CNC machining technologies available. JE forged Pistons are trusted by racers and engine builds for dependability. JE Pistons are compatible with boost and nitrous. Crown requires no deburring or preparation 2618 T6 high tensile forged aluminum JE designs are specifically engineered for extreme applications up to, and including, professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Crown design features smooth flowing radii for excellent flame travel. 1.0 x 1.2 x 2.8mm ring widths. .787 x 2.250 straight wall carbon steel wrist pin provided. Pin fitting, wire locks and rings included Compression ratio calculated at .020" deck clearance with .025" thick head gasket Learn More -
Sentra 04-06 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Colors add 2-3 weeks to shipping time Learn More -
Sentra 02-03 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"
Regular Price: $899.00
Special Price $729.98
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
SR/Nismo Stage I Clutch and Forged Flywheel - OEM Stock Upgrade (325hp)
Regular Price: $679.00
Special Price $629.78
Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit SR / Nismo Sentra - All Years (MR16DDT), only Turbo Models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325hp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. Optional LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters 11-14 Nissan Juke 1.6L FX250 Clutch Kit Organic Fiber Tough Sprung Disc The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Hitachi MAF for 04 - 12 Sentra / 350Z / Altima
Regular Price: $127.98
Special Price $96.77
Hitachi MAF for 04 - 12 Sentra / 350Z / Altima Hitachi direct replacement MAF Sensor for the 2004 to 2012 Nissan Sentra / 350Z / Altima. The OEM MAF is prone to failure/issues- upgrade to the Hitachi MAF for more consistent performance. Engine: QR25DE / VQ35DE Learn More -
Hitachi MAF for B17 Sentra SR/Nismo / Juke
Regular Price: $198.77
Special Price $169.78
Hitachi MAF for B17 Sentra SR/Nismo / Juke Hitachi direct replacement MAF Sensor for the B17 SR/Nismo (Turbo) and Nissan Juke. The OEM MAF is prone to failure/issues- upgrade to the Hitachi MAF for more consistent performance. Fits: Juke 2011-2014 (all models) Juke 2015-2018 (all models) Juke Nismo RS (all years) Sentra SR / Nismo B17 - all models Engine: MR16DDT Learn More -
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More