Search results for 'anti lift kit'

Grams 550cc Injector Kit Applications: 03-08 Nissan 350Z VQ35 / 17-20 Patrol Y62 VQ40 / 03-08 Infinti G35 VQ35 Each injector set includes dead time compensation values to help ensure consistent air/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street, and racetrack testing to ensure proper performance in the most extreme conditions. Features - 550cc 52lbs/hr @ 3 Bar - High-impedance design (no resistor box required) - Cold-machined tips for high-precision operation - Ultra-fast solenoids for precise fuel metering - Linear response across wide range of operating conditions - All injectors balanced, blueprinted, and matched within one percent - Compatible with all known fuels including gasoline, methanol, and ethanol - Unmatched cylinder-to-cylinder consistency and optimal idle quality Learn More

100% Plug and Play. No tuning or portwork required. Perfectly port matched. Features a tapered bore for increased airflow! Works perfectly with our Thermal Intake Spacers! 8 HP Gain on the Maxima/Altima w/ stock intake manifold! 12 HP Gain on the Maxima/Altima w/ gutted intake manifold! 15+ HP Gain on the 350z/G35 Includes: NWP Engineering Throttle Body Adapter Plate Kit (Required to install 75mm Throttle Body) NWP Engineering Tapered Big Bore Throttle Body Adapter Plate (Patented) NWP Engineering Port Matched Throttle Body Gasket 4 Zinc Plated Self-Locking Adapter Plate bolts 4 Zinc Plated Throttle Body bolts w/ washers Printed Detailed Installation Instructions with Photos (PDF Instructions) Two Die Cut Silver Vinyl NWP Engineering Decals Applications: 2003 - 2006 350z 2003 - 2007 G35 Coupe 2003 - 2006 G35 Sedan 2002 - 2008 Nissan Maxima (NWP 5pc Phenolic Thermal Spacer Kit required on the 04-06 Maxima for EGR valve clearance) 2002 - 2006 Nissan Altima 3.5L (NWP 5pc Phenolic Thermal Spacer Kit required on the 05-06 Altima for EGR valve clearance) 2002 - 2004 Infiniti I35 2003 - 2008 Infiniti FX35 2006 - 2008 Infiniti M35 2003 - 2007 Nissan Murano 2004 - 2009 Nissan Quest (NWP Spacer Kit required for EGR valve clearance) Learn More

Mishimoto proudly introduces its Nissan 370Z Silicone Air Intake Hose Kit! The 370Z silicone air intake hoses are made with a combination of high grade silicone and heat-resistant embedded fibers to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay.Preventing increased intake charge temperatures will ultimately increase horsepower and provide improved performance.The air intake hose is the perfect replacement for the OEM intake piping.The Nissan 370Z Silicone Air Intake Hose Kit is available in black, blue and red, and features (4) Mishimoto T-Bolt clamps for easy installation. Learn More

Mishimoto proudly introduces its Nissan 370Z Silicone Air Intake Hose Kit! The 370Z silicone air intake hoses are made with a combination of high grade silicone and heat-resistant embedded fibers to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay.Preventing increased intake charge temperatures will ultimately increase horsepower and provide improved performance.The air intake hose is the perfect replacement for the OEM intake piping.The Nissan 370Z Silicone Air Intake Hose Kit is available in black, blue and red, and features (4) Mishimoto T-Bolt clamps for easy installation. Learn More

One of the easiest additions to improve low end horsepower and torque to your VQ37 is the Silver Bullet Throttle Body Spacers. The TBS has both a Serrated and Helix combination design, which creates air turbulence in the intake manifold, increasing the air pressure in the combustion chamber. This design also reduces intake whistle that occurs with other helix-only designs. Kit comes with two spacers to work with the VQ's dual throttle body design. Serrated/Helix Design: The Serrated/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs. (US PAT 07055513) 6061-T6 Billet Aluminum Construction: All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish. Installation Is A Snap: This Silver Bullet throttle body spacer uses all factory mounting locations and a gasket providing stability and a hassle-free installation. Learn More

Mishimoto proudly introduces its Nissan 370Z Silicone Air Intake Hose Kit! The 370Z silicone air intake hoses are made with a combination of high grade silicone and heat-resistant embedded fibers to prevent increased temperatures in the intake charge caused by excess radiant heat in the engine bay.Preventing increased intake charge temperatures will ultimately increase horsepower and provide improved performance.The air intake hose is the perfect replacement for the OEM intake piping.The Nissan 370Z Silicone Air Intake Hose Kit is available in black, blue and red, and features (4) Mishimoto T-Bolt clamps for easy installation. Learn More

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Outperforms every other Cold Air system on the market * Manufactured and assembled in the USA * 50-state legal or pending legality * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life Learn More

Smooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track. Learn More

AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Outperforms every other Cold Air system on the market * Manufactured and assembled in the USA * 50-state legal or pending legality * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life Learn More

Volant PowerCore Cool Air Intake Kit *Volant Air Filter Box:* Our Cross-Link polyethylene box is engineered to each specific application for low restriction and an increase in air volume. It insulates and protects the filter from engine heat, moisture, dust and debris to provide colder air to the engine for an increase in horsepower. *Volant Air Duct:* Factory air inlet ducts use sound baffles and awkward bends which restrict flow. Our Cross-Link polyethylene air ducts are sculptured to give the engine less restrictive breathing. Incorporating larger diameters and unique bends, that can't be duplicated with metal ducts, allow for maximum airflow velocity and throttle response. *NEW Volant Filters with PowerCore® Filtration Technology:* This air filter is the most revolutionary on the market. Manufactured by Donaldson® to Volant's applications, this filter uses advanced technology for improved efficiency. This material is a high-quality synthetic, that won't deteriorate as easily as traditional paper element and cotton/gauze filter media, while also providing vastly improved filtration up to 99.97%. In addition, it's water resistant and never needs oiling. PowerCore Filtration Technology works by directing air into the front of the filter, where it is channeled into its fluted design. The channels are alternately sealed, allowing air to enter through an open flute and forcing it to exit out an adjacent flute. This allows the air to be filtered in one pass through the filter media with less restriction, allowing clean air to enter your engine for increased airflow and higher filtration efficiency. This technology allows the filter to include a 4 year or 100,000 miles warranty when used in urban conditions. Volant offers Polished Aluminum or Carbon Fiber Look lids. (Some of our older applications and low production intake kits have the carbon fiber look lid.) *High Performance Silicon Connectors:* Our silicone hose connectors provide flexibility while maintaining strength and thermal stability. They won't crack or deform over time like rubber connectors. *Stainless Steel Clamps:* We only use marine-grade, stainless steel clamps that provide optimal performance to provide a solid seal that won't loosen or deteriorate. Learn More

K&N Fuel Injection Performance Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today. FEATURES * Guaranteed to Provide more HP and Increased Acceleration * Engineered to Specific Vehicle Design * Easy to Install, Usually in 90 minutes or less! * Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) * Million Mile Limited Warranty * Replaces OEM Filter and Air Box * Air Filter is Washable and Reusable * Works with Original Equipment Manufacturer Computer Systems * Designed to use Factory Holes & Mounting Points Whenever Possible * Most are CARB Exempt and street legal in all 50 US States Learn More

Smooth out your intake with the Mishimoto 350Z induction hose kit. 5-ply silicone construction makes it more durable than the stock rubber hose, and the steel reinforcement rings prevent collapse when under load. Installation of this 350Z intake hose can be accomplished in under 30 minutes and yields an increase of 4 whp and 6 wtq! This 350Z intake hose works with the stock intake system or the Mishimoto 350Z Intake. This 350Z induction hose is true bolt-on performance, as it does not require a tune. All Mishimoto 350Z parts come with the Mishimoto Lifetime Warranty to ensure that your Z is always performing, both on and off the track. Learn More