Search results for '00 nissan sentra se'
-
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR Hi-Power Intake Plenum-Full Kit
Regular Price: $899.99
Special Price $699.00
2JR introduces the best intake plenum for your 1st gen QR with custom CNC milled throttle plates, machined and decked head surfaces to maximize power and gains while providing no ECU fault codes or issues. Huge mid range gains with excellent top end performance. No tune is required. For both NA (low and high comp) and forced induction applications (up to 20psi). Expect quicker throttle response and improved driveability. Both on and off the street. Includes a new high-capacity fuel rail and all hardware necessary for a complete install. Optional is our 2JR 1-piece Moto-style cold air intake. Save over $45 when you purchase both together. NOTE! IF YOU ADD THE 76MM PLENUM SPACER MOD - YOU DONT NEED THE 5" SILICON COUPLER. The plenum spacer mod adds a ton of volume to the hi-power plenum. Its a MUST HAVE! OVER 28whp in the midrange. The highest hp mod available for the B15. Install instructions: https://www.facebook.com/206550699368164/videos/148839433766275 Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
UpRev Tuner Package - Edit your own tune! includes cable, license and 2JR Tune + Base Tune
Regular Price: $775.00
Special Price $729.99
UpRev Tuner includes: 1 Interface Cable, 1 UpRev Re-Flash license, ROM Editor, Stock ROM, and Back to Stock ROM. UpRev Tuning Suite is a Windows-based software; you will need a Windows-based laptop or a tablet that runs a full version of Windows for flashing the Base Tune and for data logging. (8,10 or newer) 2JR will provide a ROM file to allow you to Flash your ECU based on your engine specs sent to 2JR Up to 3 Maps on cruise control equipped vehicles Idle RPM Speed Limiter Electronic Throttle Control to achieve Wide Open Throttle at all speeds. Rev Limiter DTC disable AFR Targets Fuel Compensation (for NA or Turbo cars) Ignition Timing Advance Cam Phasing Learn More -
2JR STAGE IV Clutch Kit (550whp) - QR25DE and VQ35DE
Regular Price: $454.99
Special Price $399.99
2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Stage IV Drag / Road Course Series No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, pedal feels like STOCK! 250% Increase in clamping force Ceramic Six Rivet Carriage is good for ease of gear transition with higher horsepower. Withstands heavy launches and continuous track duty without overheating. Can be used on the street as well. Spec - 550whp / 500ft/tq Only available in 9.5" Disk for VQ35 and QR25 (with 2JR or JWT Flywheel). This clutch will not work on QR25DE with STOCK or FIDANZA Flywheels!! Can be ordered as a combo with the 2JR Flywheel (fits only QR25DE). ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Learn More -
2JR HiPower I-Beam Rod Set (450whp)
Regular Price: $420.99
Special Price $399.99
2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.
H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness.
I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je
Learn More -
2JR HiPower H-Beam Rod Set (700whp)
Regular Price: $469.99
Special Price $429.99
2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.
H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness.
I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je
Learn More -
2JR QR25 High Performance Cast Piston Set with Rings 9.5-1
Regular Price: $349.99
Special Price $249.99
2JR produced turbo pistons with hastings racing ring set. Hard anodized piston domes to resist detonation. Thicker ring lands to prevent cracking. Moly coating on the skirts to lubricate piston walls. 9.5-1 Comp with the best anti-detonation quench pads on the piston tops. Good for up to 350whp. Can also be used on all NA projects since these pistons have the same comp ratio as the poorly designed B15 pistons. INCLUDES HASTINGS PISTON RINGS - Made in the USA Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. Comes in the following sizes - standard .5 mm overbore (20 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro
Regular Price: $159.00
Special Price $110.99
After testing 1 set with excellent results, we have asked SuperPro to make a select set of only 10 sets of axle pivot bushings in 95K durometer for us. This is nearly 300% stronger than their normal Super Pro hardness and have grooved inner races for quiet operation to hold grease. And you reuse your original shell so install is fairly easy. Fits P10, P11, B15, N15, N16 Improve rear balance, turn in and eliminate understeer. Build for the street for no noise and track ready for full stiffness. LIMITED TO JUST 10 SETS. Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
Fiesta ST - Wilwood Front Big Brake Kit
Regular Price: $1,059.98
Special Price $969.78
Fits Fiesta ST and all Fiesta models (2011- current) The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.19” diameter rotors for this group of front wheel drive sport compact kits. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) 2JR allows you to choose your brake pad compound / Rotor Type / Caliper Color BP10 - Street BP20 - Street Performance BP-Q Street Performance / Very Low Dust / Low Noise (suggested) PolyMatrix B - Racing Pad Set (best for AutoX, Track Days) Kits may take approx 2-3 weeks to build/ship Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
B15 SpecV Race Header + 3" Midpipe
Regular Price: $949.00
Special Price $698.78
Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More -
B15 OEM or Full Race Axle Set QR25
Regular Price: $999.99
Special Price $589.00
Sold as a pair. You have the option of getting OEM axles - or Race axles. OEMs are good for up to 500whp, while the race axles are good to over 600whp. The race axles have 38mm upgraded center shafts, forged chromoly cages, increased ball/cup design, high temp race CV grease, Neoprene road race boots and vented center sections for handling speeds in excess of 150mph for continued use. For RACE axles - *Customer Must Supply OEM Axles* **Must be factory axles with 100AC stamped into the inner CV housings Learn More -
AC Delete Kit (Non-OEM)
Regular Price: $106.98
Special Price $92.78
AC Delete Kit (Non-OEM) Fits all years, QR25 (02 and up) - removes the AC compressor and replaces it with free spinning pulley, bracket and hardware (included). NO NEW BELT CHANGE REQUIRED. Uses same size as stock belt. Free up some HP, less drag on the QR. Learn More -
2JR Fiesta ST Hi-Power Downpipe 304SS
Regular Price: $329.99
Special Price $179.98
Made from 304SS Stainless, bolts to the OEM exhaust or 3" Catback System. The sound level of the full race to the catted downpipe is nearly same, only 7-10db at WOT. With our 2JR 3" catback and full race downpipe, its very streetable. The difference in WTQ vs the OEM downpipe is over 30ft/lbs. With our defouler (optional) - we never had a check engine light in over 20K miles and passed GA emissions testing. Now with lower bracket for strength With our 2JR 3" Catback, Full Race DP, Cobb AP (93map V1), and K&N Drop in Filter - we clicked off continuous 247-251wtq runs with varying between 200-202 whp. With the 2JR catted DP and the same mods, we turned mid 230wtq. Sound Clips (2JR 3" Catback with Full Race DP) Intake Sound http://1drv.ms/1ldXC1z Driveby http://1drv.ms/1ldXNtH Pull Off http://1drv.ms/1ldXUFR Learn More -
Fiesta ST Delrin Lower Mount Insert
Regular Price: $89.99
Special Price $64.99
No more engine knock on firewall! 2JR Solid Delrin insert for the Fiesta ST lower mount. Reduces engine movement by over 75%. Provides excellent shift feel and more front bite during spirited driving. Minimal vibration. Used on 2JR Time Attack Fiesta ST. Learn More -
Fiesta 1.6L ST Mobil 1 Oil Filter
$12.99The Mobil1 Extended Performance Oil Filter utilizes synthetic fibers to leave your vehicle with cleaner oil and an engine that performs better and lasts longer. When used with Mobil 1 fully synthetic motor oil, this filter offers dependable protection for your engine. Product Features: Designed for today's longer service intervals Advanced synthetic fiber-blend filter media for enhanced contaminant removal High-capacity design stores an increased amount of contaminants Reduces resistance to oil flow while improving filter efficiency Withstands up to 5x the normal system operating pressure Learn More -
Focus RS Accessport V3
Regular Price: $695.00
Special Price $689.00
Accessport for the Focus RS The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. Learn More -
Fiesta / Focus ST - Cobb Access Port (AP)
Regular Price: $625.00
Special Price $620.00
Application: Fiesta ST Focus ST The Accessport is the world's best selling, most flexible, and easiest to use ECU upgrade solution for your vehicle. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Follow our staged upgrade path with pre-loaded Off-The-Shelf (OTS) maps or use custom mapping for any modification level. It's the last engine management solution you'll ever need. * *Larger, full color, higher resolution screen* We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions, and more. This screen has room to spare - so no need to run back to your laptop. * *Customizable multi-gauge display* Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track. * *In vehicle mounts, on/off switch* There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle. Also, with a light sensing auto-dimmer, you can run hassle free in day or night. * *Faster and easier to use with a familiar face* We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help. * *Interchangeable faceplates* Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one. Our favorite is the chrome one installed in our GT-R. Learn More -
Ford Fiesta ST High Flow Filter
$49.00COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using proprietary woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power and fuel economy! SHIPS FREE! Learn More