Search results for 'bolt'
-
QR25 Forged Turbo Block
Regular Price: $3,699.99
Special Price $3,299.99
QR25 Fully Forged Turbo Short Block built with 89.5mm Wiseco Dished Pistons with hard moly coated skirts, 2JR H Beam Forged Rods, ARP Rod Bolts and OEM Nissan Crank. Machined with ACL bearings, new OEM mains. Ready to drop in. Just add your head or a fresh 2JR head with 2JR valve springs for $599 more. Good for NA Builds and Turbo Builds up to 400whp. Excellent durability against detonation and extreme use. 1. 2JR 89.5mm Wiseco Dished Pistons with hard moly coated skirts 2. 2JR Forged H-Beam Rods 3. ARP Rod Bolts 4. OEM Crankshaft 5. ACL Bearings Optional: 2JR QR25DE Sleeved Block Darton MID Sleeves, installed. The stock block tends to crack the liner after 400whp. These blocks are good to over 700whp while the Darton MID Sleeves are made of ductile iron and are able to hold over 1000hp. The sleeves are unfinished and will need to be honed to match your piston size. Benefits: Cast iron performance in an aluminum block Improved block integral strength Improved cooling Learn More -
B15 Japan-Spec 555 Steering Tie Rods / Ball Joints - Kit or Pair (02-06)
2JR offers Japan Spec 555 Inner and Outer Tie Rod kits for your B15 (all models). You can also add high spec 555 Ball Joints for long life. These are the highest quality OEM replacement inner and outer tie rods you can buy for your B15. No mods required - bolts right in. Improve your steering response -even better when the B15 was new with 555 parts. Learn More -
2JR Nissan/Toyota CNC Stainless Header Stud Kit
Regular Price: $119.87
Special Price $86.11
2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More -
MR16DDT (Juke/B17 Sentra/Nismo) 2JR HiPower I-Beam Rod Set
Regular Price: $629.99
Special Price $519.78
2JR rod sets for the MR16DDT 1.6L are extremely durable, lightweight and will hold over 600whp. All come with ARP rod bolts.
Our I-Beam rods are extremely lightweight made from 4340 that is designed for all high hp applications in the 1.6L.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. These exact rods are used in the MRP Insane 650whp Juke
Fits all years - Juke, Pulsar - 1.6L
Learn More -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 V2- Billet Aluminum Radiator Supports (Pair)
Regular Price: $51.99
Special Price $39.78
Version 2 - Made from Billet 5/8th Thick 6061 Aluminum Fits all B15 Radiators - OEM or Aftermarket. The purpose is to replace the rusted, oversized and flimsy OEM radiator brackets to our solid billet rad supports for a more secure attachment and header/turbo clearance. By having more spacing to the header the radiator will stay cooler. You will reuse your OEM bolts to secure or you may also use the optional fender washers - in either red or black. Learn More -
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L)
Regular Price: $579.99
Special Price $429.78
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L) Application - Header Only 2007 - 2012 2.5L Nissan Sentra 2007 - 2019 2.5L NIssan Altima (coupe and sedan) Application - Midpipe 2007 - 2012 2.5L Nissan Sentra (only) Midpipe will not fit Altima Coupe or Sedan The wait is finally over! The Medusa MB16 header is here!. Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The MB16 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Slim fans and ACB ARE NOT required for fitment. Simply install and enjoy the performance and rumble from your Lt Ed MB16 Medusa. Made from 304SS Stainless. Bolts directly to your factory midpipe or step up to the 2JR 70mm Stainless Midpipe for even more power and roar! Learn More -
B15 QR25 OEM Nissan Valve Cover with Gasket
Regular Price: $198.68
Special Price $179.98
B15 QR25 OEM Nissan Valve Cover - comes with OEM valve cover gasket. If you have leaking spark plug galleys - this is what you need to fix it. You can also add optional 2JR Titanium Valve Cover Bolts in Raw or Burnt Comes with OEM Gasket Learn More -
2JR Race Spec - Sentra (02-06) Stainless Braided Clutch Line
Regular Price: $44.99
Special Price $19.99
2JR Clutch Lines: are single lines made of stainless steel braided hose with a clear PVD protective coating to protect against chemicals and heat. The exact length for all Sentra models, from 2001 to 2006. Bolts and washers are included. Direct fit! Improves the clutch response by removing the soft rubber OEM hose and upgrading to braided SS. Smoke Only! Learn More -
2JR Rigid Disk Stage III Clutch Kit (400whp) - QR25DE and VQ35DE
Regular Price: $489.99
Special Price $399.99
Rigid Stage III Clutch Sets are here! These are stronger, lighter and can handle the higher TQ loads. Same pad material as the Stage 3 clutch sets but without the sprung cages. Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, pedal feels like STOCK! 210% Increase in clamping force Spec - 425whp / 425ft/tq Applications 2002-2006 - Sentra 2.5L 2002-2006 - Atlimta 2.5L 2002-2006 - Maxima VQ35 (flywheel does not fit - only the clutch set) 2002-2006 - Rogue 2.5L Does not fit 2007+ Models (Gen2 QR) ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Options Include: 1. ARP Flywheel Bolts (only fits 2JR Forged Flywheel) 2. OEM Throwout Bearing Upgrade 3. 2JR Stainless Clutch Line 4. Motul Transmission Fluid Set (3 Bottles) This is the best fluid we've tested in the QR. Not stiff when cold, shifts smooth in all temp ranges. Protect your trans with the best 5. Forged Steel 14lb Flywheel Learn More -
Mishimoto 03-06 Nissan 350Z Performance Air Intake
$237.95Add some horsepower and sound to your Nissan 350Z's VQ35DE engine with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2003--2006 Nissan 350Z and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides maximum gains of 10 hp & 13 tq over the stock intake while maintaining safe air/fuel ratios. This kit is simple to install, making it perfect for some extra punch on the street or autocross course. The Mishimoto Nissan 350Z Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The stock MAF housing is retained which translates into a smooth power band with safe air / fuel ratios. To reduce air intake temperatures (IATs), a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The heatshield bolts right up to the stock inlet duct on the front support to draw in the maximum amount of outside air into the filter. The heatshield also comes fully assembled with protective rubber strips to fully seal it from hot engine bay heat and prevent any vibrations during operation. The Mishimoto high-flow air filter features an integrated venturi and center inlet stack for smooth, high velocity airflow. The large filter provides 271% greater surface area over stock and provides proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Along with an upgrade in power, this intake also provides an aggressive and deep-sounding intake tone that is a huge improvement over the stock intake. The Mishimoto Nissan 350Z Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
75mm Big Bore Throttle Body Kit (RWD and FWD VQ35DE Nissan/Infiniti)
Regular Price: $380.00
Special Price $355.00
100% Plug and Play. No tuning or portwork required. Perfectly port matched. Features a tapered bore for increased airflow! Works perfectly with our Thermal Intake Spacers! 8 HP Gain on the Maxima/Altima w/ stock intake manifold! 12 HP Gain on the Maxima/Altima w/ gutted intake manifold! 15+ HP Gain on the 350z/G35 Includes: NWP Engineering Throttle Body Adapter Plate Kit (Required to install 75mm Throttle Body) NWP Engineering Tapered Big Bore Throttle Body Adapter Plate (Patented) NWP Engineering Port Matched Throttle Body Gasket 4 Zinc Plated Self-Locking Adapter Plate bolts 4 Zinc Plated Throttle Body bolts w/ washers Printed Detailed Installation Instructions with Photos (PDF Instructions) Two Die Cut Silver Vinyl NWP Engineering Decals Applications: 2003 - 2006 350z 2003 - 2007 G35 Coupe 2003 - 2006 G35 Sedan 2002 - 2008 Nissan Maxima (NWP 5pc Phenolic Thermal Spacer Kit required on the 04-06 Maxima for EGR valve clearance) 2002 - 2006 Nissan Altima 3.5L (NWP 5pc Phenolic Thermal Spacer Kit required on the 05-06 Altima for EGR valve clearance) 2002 - 2004 Infiniti I35 2003 - 2008 Infiniti FX35 2006 - 2008 Infiniti M35 2003 - 2007 Nissan Murano 2004 - 2009 Nissan Quest (NWP Spacer Kit required for EGR valve clearance) Learn More -
B15 Nismo Rear Sway Bar - Hardware Only
Regular Price: $129.77
Special Price $86.98
Full Hardware and instructions kit for the B15 Nismo Rear Sway Bar. This is the original hardware from Nismo for the Nismo/2JR 25mm Rear Sway Bar. Brand new in the box. All the brackets, bushings, bolts, nuts and washers - along with instructions on setting it up properly. Learn More -
Gen1 Signal Wheel for B16 Crank
Regular Price: $106.78
Special Price $96.14
Gen1 Signal Wheel for B16 Crank with Bolts Signal wheel to install a B16 Crankshaft or 2JR Knife-edged Crankshaft in a Gen1 QR25 (2002-2006). Complete OEM kit with Bolts Learn More -
Gen1 QR25DE OEM Headgasket Kit
Regular Price: $146.71
Special Price $118.41
Gen1 QR25DE OEM Headgasket Kit Includes OEM Nissan Headgasket and headbolts for the Gen1 QR25DE (2002-2006). 2JR also includes the copper grease for the threads of the bolts. NOTE: you will need a E20 torx bit to remove and install the OEM Bolts and a Angle Gauge - both can be added in the options below Headbolt TQ Sequence https://f01.justanswer.com/JACUSTOMERj34ssqqy/2013-03-05_013940_em_01.jpg Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B17 SR / Nismo Axle Back Exhaust - 2.5"
Regular Price: $229.00
Special Price $179.98
Axle Back Exhaust for the B17 Turbo - SR/Nismo Specs: 2.5" Stainless Steel with Resonated Carbon Blue/Gold Tip Includes bolts and gaskets Bolts on your OEM factory exhaust / No fabrication required Increases sound levels by 8-9db over stock 16lb weight savings 1 Week build time after order is placed Learn More -
Juke AWD Axle Back Exhaust - Carbon Fiber
Regular Price: $289.99
Special Price $249.78
Juke AWD Axle Back Exhaust - Carbon Fiber Fits All Years / All Models of the AWD Juke - inc Nismo Specs: 2.5" Stainless Steel with Resonated Carbon Blue/Gold Tip Includes bolts and gaskets Bolts on your OEM factory exhaust / No fabrication required Increases sound levels by 8-9db over stock 16lb weight savings 1 Week build time after order is placed Learn More -
E210 Corolla Wilwood Forged Dynapro 6 Front Kit
Regular Price: $1,899.99
Special Price $1,349.78
E210 Corolla Wilwood Forged Dynapro 6 Front Kit Wilwood's newest DynaPro DP6A Calipers combine pure-bred racing technology with contemporary design to deliver superior braking and high-tech style on a wide range of custom, show, and competition vehicles. This newest model in the DynaPro series features a reinforced triple bridge construction, with five high strength steel bridge bolts, making it the strongest and stiffest DP6 caliper ever built. With Forged aluminum, six piston differential bore body and stainless steel pistons with high temperature seals. Each kit is engineered specific for each vehicle to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs provide choices that enable the builder to personalize the style and optimize brake performance. Fits OEM Corolla 17+ Rims, CVT and Manual trans Great for autocross and track cars. Saves over 25lbs of unpsrung weight. Kit Includes: Wilwood 6 Pistons Calipers 2JR Billet Rotor Hat Wilwood Smooth or Drilled and Slotted Rotors Wilwood Brake Lines Wilwood BP10 Brake Pads (Street) Wilwood/2JR Installation Hardware 2JR Billet Caliper Brackets (E210 Spec) Learn More