Search results for '00 nissan sentra se'
-
B15 13" Wilwood Superlite Brake Kit Slotted Spec37 Rotors
Regular Price: $1,699.99
Special Price $1,298.89
The big pad capacity of the forged Superlite four piston caliper is combined with oversized rotors for these unique kits. The roots of the forged Superlite are deep in competition. It is a track proven performer. These kits give high-tech style with full capability for extreme duty use on the street or at the track. The ultimate in braking power for your B15, we offer the best kit on the market at the best possible price. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. These Big Brake kits require at least 17" diameter wheels, and may require spacers. 02-03 Stock Wheels - run 20mm Spacers with 82mm Studs 04-06 Wheels - run 10mm Spacers with 55mm Studs Kit includes parts for both front wheels: * 1.10" Thick x 12.90" O.D. Rotors * Forged Superlite Brake Calipers * Caliper Mounting Brackets * BP-10 Smart Compound Brake Pads * Brake Hats * Wilwood Stainless Front Brake Lines Learn More -
B15 12.3" Rear Big Brake Kit
Regular Price: $399.99
Special Price $299.99
Improve your stopping performance by 140% with our 12.3" Rear Brakes! This is the ultimate Rear Brake Setup for your B15, used on our race car to haul down speeds in excess of 160mph. This kit replaces the small stock 10" rear rotors with 12.3" rotors and brackets for excellent street and track performance. Slotted and drilled and Black E-coated for no rust and long life. Includes all hardware. Bolts directly to your stock caliper with 2JR supplied hardware. 3 years of racing and 2JR has yet to wear out 1 set of these rotors. Learn More -
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
B15 JWT Turbo Reflash (02-03)
$595.99Finally a JWT reflash for your turbo 02-03 B15 ECU (QR25). Good for up to 350whp. For best performance, must match up with our 2JR injectors as the tune is based specifically off these injectors. Lead time is approximately 3 weeks for a reflash once the ECU is received.Reflashes your 02-03 Spec-V ECU for:
- 2JR Siemens Injectors
- Stock MAF
- 9.5-1 or 8.5-1 Compression
- Speed Limiter Removal
- Increased Rev Limiter
-
B15 JWT N/A Reflash 02-03 Spec-V
Regular Price: $329.99
Special Price $299.99
Custom reflash by JWT to removes your speed limiter and raised the rev limit to your choice. For 02-03 ECUs ONLY. JWT turn around time is min 3 weeks. We also offer a core swap. We send in our 02-03 ECU to be flashed. Once complete JWT will send it to you and you return your working 02-03 ECU to us. Core is $375, less $25 shipping. You'll receive a $350 refund when your ECU is received back. CORE SWAP ONLY FOR NON-NATS CARS! Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-8 JWT CAMSHAFT SET
$1,386.33High HP, Racing cam set. 272 DEG/.473 Must use JWT Valve Springs Learn More -
VQ35 C-9 JWT CAMSHAFT SET
$1,386.33Ultimate Race Cam for your VQ35 / 283.5 DEG/.516" MUST USE WITH JWT SPRING/SHIM SET Learn More -
VQ35 C-10 JWT CAMSHAFT SET
$1,386.33The biggest cam ever produced by JWT. MUST USE WITH JWT SPRING/SHIM, DOES NOT FIT REV-UP MOTOR (REQUIRES HEAD CLEARANCING) Learn More -
JWT LIGHTWEIGHT FLYWHEEL MAXIMA/ALTIMA VQ35
$491.27V6 Altima / Maxima aluminum flywheel weighing in at 15 lbs. Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
2JR B16 SpecV Midpipe - 70mm Stainless
Regular Price: $249.99
Special Price $194.98
2JR Stainless 70mm Midpipe for the B16 SpecV - fits the MB16 Header as well as the stock header (or any aftermarket header for the B16 SpecV). Made from 304 Stainless Steel with a flex section for long life during hard launches at the track. Step up from the OEM 2" midpipe to a 70mm midpipe from 2JR. Learn More -
B15 Treadstone MAF Adapter
$35.99The Treadstone mass air flow adapter manufactured for the Spec V kit was specificaly designed to seal under high boost pressures, and incorporates a bead rolled lip to keep couplers from blowing off and a rubber gasket. Learn More -
2JR Billet Wheel Spacers with optional Forged Studs / Lugs
Regular Price: $39.99
Special Price $17.98
2JR wheel spacers give your car improved roll center and better stance. Made from billet 6061, our hub centric come with 67.1mm center bore to fit all Nissans. 10mm is not recommended for the rear of the b15 chassis due to the length of the hub. Double drilled 4x114.3 AND 5x114.3. By adding track width, we dropped our laptimes at Road Atlanta by almost 2 secs. We also saw improved tire wear. All +5mm spacers are hubcentric for perfect fitment - you don't need to add studs other than stock studs. 2JR 55mm studs are required for the 15mm spacers and 82mm studs are suggested for the 20mm spacers. Open Lugs are not required; however, for a race-look add the 2JR forged chromoly Black lug open lug nuts. Solid, built for life - used on our race car. Sold as a pair. Learn More -
10mm Street Traction Spacer (ALK) B15
Regular Price: $95.99
Special Price $49.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, and take control of your car. The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. NOW includes hardened pins and 6 50mm bolts. Learn More -
15mm Race Spec 2JR Traction Spacer (ALK) B15
Regular Price: $139.99
Special Price $69.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, take control of your car. Does what our 10mm spacer does, only better!! The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. Includes hardened pins and 6 50mm bolts. Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
2JR Forged Steel Flywheel - QR25DE 14lbs
Regular Price: $419.99
Special Price $299.99
2JR introduces an American Made lightweight steel flywheel (ST) is recommended for all QR25 clutch kits. Perfect flywheel for upgrading over the massively heavy OEM dual mass flywheel which is prone to split apart and break. Recommended for naturally aspirated and or street driven applications. This flywheel preserves low end torque and drivability. Well suited for our Stage II, III, and IV clutch kits. Direct bolt on and fits OEM size clutches (9.25" disk and 2JR clutches with 9.5" disks). Stock Flywheel is 28lbs. Saves 14lbs! For Gen1 QRs (02-06) Learn More
