Search results for 'Juke nismo'
-
2JR UpRev Remote Tuning - For Non-Boosted Nissans
Regular Price: $475.98
Special Price $399.00
2JR UpRev Remote Tuning - For Non-Boosted Nissans NOTES: You must have a license and cable already. If you don't, please select one of the other options on our site. This Pro Remote Tuning Packing allows you to have your vehicle tuned remotely via the internet or mobile hotspot anywhere in the world. ECM tuning is necessary to bring out the most out of your basic bolt ons. Depending on the application, the tune itself can net as much power as all your bolt ons combined (basic N/A bolt ons). The flat rate of $395 includes a full remote/street tuning session. A properly tuned vehicle is key to top performance. The factory ECU (computer) on the your Nissan is very conservative, and overly rich. Nissan left a lot of power on the table. On a stock Nissan 370Z, gains of 15-20 horsepower and torque are common. Experience more power, greater efficiency, better drivability, and simply more fun. After your order our in-housing tuning technician will reach out to you via email with the instructions, video and next steps. Choose $9.89 shipping at checkout and that amount will be refunded to you. For N/A Tunes Only. Not for Nissan Jukes Learn More -
Sentra/Maxima 2JR Nismo Short Throw Shifter / optional Shifter Bushings
Regular Price: $99.99
Special Price $65.98
Nismo-style short throw billet shifter (STS) for the 2002-2006 Sentra B15 and 2002-2003 Altima/Maxima. Reduces throw by 30% without causing stress on the shifter cables which can lead to breakage. Provides a more direct, positive shift for each gear. Downside is a slight "tink" when shifting due to the billet shifter assembly. Excellent upgrade for your Nissan, especially when paired with 2JR's delrin Shifter Bushings Available in red or black The STS can used on stock Nissan shifter bushings or with 2JR's delrin shifter bushings as a combo kit. CNC'd from delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. These are the best bushings 2JR has ever produced. They will never wear out, never need grease, and never absorb water and corrode. Includes Interior and Transmission Bushings (6 pieces) ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kit) Learn More -
B15 SpecV Race Header + 3" Midpipe
Regular Price: $949.00
Special Price $698.78
Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More -
02 Sensor De-Fouler - Stainless Steel
Regular Price: $17.99
Special Price $12.99
Assists in removing the cat code by spacing out your secondary 02 Sensor. Fits on all 2JR Downpipes and midpipes (Sentra, Juke, Fiesta, Focus, Etc) made from Stainless Steel. Learn More -
Nissan Sentra Lightweight Pulley (B17) - Fits Sentra Turbo / Nismo
Regular Price: $134.99
Special Price $98.78
For all B17 Sentra models - 1.8L and 1.6L Turbo!. From 2013 and up. 2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOES NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Incredible results with a simple pulley install - we love it on ours! Fits all B17 Models - including the SR Turbo and Nismo! Learn More -
GFB 11-14 Nissan JUKE 1.6L Turbo TMS Respons Blow Off Valve Kit
Regular Price: $279.98
Special Price $264.78
GFB 11-14 Nissan JUKE 1.6L Turbo TMS Respons Blow Off Valve Kit Tests show that TMS features can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears. On top of the TMS benefits, the Respons also packs GFB’s patented adjustable venting bias system found on the Stealth FX. This unique system allows the amount of air vented to either recirc or atmosphere to be infinitely varied to change the venting sound like a stereo volume dial! So if you want noise with your performance, the Response can deliver! By fine-tuning the venting ratio, you CAN achieve a blow-off sound WITHOUT throwing a CEL, running rich, stalling, using more fuel or causing any other problems commonly associated with atmo-venting valves on cars with MAF sensors. *Features* * Advanced TMS benefits * Spring pre-load adjustment for max. response * Venting configurations: - Full progressive bias adjustment from recirc (silent) to atmosphere (loud) - Bias adjustment done manually via cap ring - C an be locked off in full recirc mode for legality purposes Learn More -
Juke 340LPH Direct Fit Fuel Pump - all years
Regular Price: $179.99
Special Price $99.99
2JR High Volume 340LPR Race Fuel Pump for the Nissan Juke. 2JR uses the exact same internals as the OEM Bosch Pump but we upgrade the motor armature with less turns, thicker wire, for 90% more rpm, which means more flow. Our pump is a direct drop in to our Juke Nissan canisters. No cutting or trimming is required.! All Walboro and other aftermarket fuel pumps are too long which makes for a difficult install. Direct fitment in your Juke INSTALL VIDEO https://youtu.be/_21sk6yaarw Fits all years, all models Compatible with E85 For Turbo Builds over 350whp Also available is 255LPR pump Learn More -
High Performance Juke Stainless Brake Line Set
Regular Price: $142.99
Special Price $109.98
2JR Nissan Juke Stainless Steel brake lines provide a quicker, firmer, more consistent pedal response by reducing system compliance and maintaining consistent brake pressure. Our Brake lines consist of a PTFE inner line that carries the brake fluid, which is then covered with a layer of woven stainless steel braid. The stainless braided hose is also coated with a smoked abrasion resistant PVC cover for maximum protection against chaffing.All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
Sold as a full kit. Front and Rear. Production time is approx 3 weeks.
Add 2 Bottles of Motul 5.1 Brake Fluid for $19.99
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers' recommendations. Specially designed for anti-locking brake systems (ABS). 100% synthetic. Dry boiling point: 272C / 522F. Wet boiling point: 185C / 365F. Standards:
Learn More -
2JR Sentra Turbo SR / Nismo 70mm Midpipe (20wtq / 15whp)
Regular Price: $299.99
Special Price $269.78
2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the Sentra SR Turbo and Nismo editions. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light because an 02 Spacer is built in to the midpipe! Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Fits all B17 Turbo Sentras Learn More -
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
2JR B17 SR Turbo / Nismo 304 Stainless Catback - Carbon
Regular Price: $699.00
Special Price $589.78
2JR B17 SR Turbo / Nismo 304 Stainless Catback - Carbon Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unlock your car's potential with 2JR! Sound Clip Learn More -
2JR Juke Short Ram Air Intake (2015+)
Regular Price: $249.98
Special Price $189.98
Juke Short Ram Intake - Fits only 2015+ Models. If you have any year Juke RS - order the V1 model 2JR Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver large power gains. We also monitor fuel trim correction factors and all OBDII sensors during product development to eliminate leaning the engine out and/or throwing a check engine light. Available in Polished / Wrinkle Red / Gloss Black Colors will add 2 weeks Learn More -
2JR Juke Remote UpRev Tuning - includes standard cable, license and 2JR Tune
Regular Price: $850.99
Special Price $799.78
For V1 Motors and all RS models ONLY (2011-2014 all models, and RS all years) Will not work on V2 Juke Motors - 2015 and Up (except RS) Allow 2JR to remotely tune your Nissan Juke via UpRev. 2JR provides the license, cable and software links - and works their tuning expertise to dial in your Juke based on your mods and driving style (street / autox / track). 2JR will walk you through the process of simply datalogging the ECU during driving and we will review your data and provide a tune back to you. Typically 6-8 datalogging sessions are required to dial it in to 2JR's high tuning standards. This can take up to two weeks of working with you - so certainly your patience is always appreciated through this process. FYI - your UpRev license can always be flashed back to the cable and the cable sold in the future should you sell your vehicle / part out. This can also be done if you are going in for warranty work. 2JR can provide you with the back to stock rom in these situations at no charge. Learn More -
AEM 2017 Nissan Sentra Turbo SR / Nismo Gunmetal Gray Cold Air Intake
Regular Price: $399.98
Special Price $378.98
Fits all Nismo/SR Turbo Sentras AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Learn More -
Injen B17 SR / Nismo Sentra Turbo Intake (Black or Polished)
Regular Price: $388.95
Special Price $362.78
Injen B17 SR / Nismo Sentra Turbo Intake (Black or Polished) Fits Sentra SR Turbo And Nismo Models Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology Black and Polished are in stock! Learn More -
B17 Sentra Camber Bolt Kit (Set)
Regular Price: $24.99
Special Price $21.25
Fits all B17 Models - inc Nismo and SR EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Learn More -
B17 Sentra RS-R Spring Set (SR/Nismo)
Regular Price: $249.98
Special Price $239.78
Fits all B17 models including the SR Turbo and Nismo The RS-R Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its handling. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car both for performance and for comfort. PartNumber rsrN205D Description Down Sus Springs Lowering (F/R) 30-35mm / 30-35mm Spring Rate (F/R) 2.39kg/mm / 3.95kg/mm Learn More -
B17 Sentra SR Turbo / Nismo Catch Can
Regular Price: $199.00
Special Price $159.78
2JR Complete Catch Can Kit for the B17 Turbo (all models). Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 4 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! https://fb.watch/aQ1zl1Ar1m/ Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -3 Color Options -Safe for Pressurized Applications Learn More -
B15 Sentra Catch Can Kit - 02-06 Models QR25
Regular Price: $199.98
Special Price $159.78
2JR Normal Sale Price - $159.99 2JR Complete Catch Can Kit for the B15 Sentra - 02-06 Models QR25. Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 3 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. Mounts directly to the B15 Firewall using existing threaded holes. No cutting/drilling required. Works on any intake with PCV port before the throttle body, inc OEM/2JR/AEM/Injen/Nismo FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! https://fb.watch/aQ1zl1Ar1m/ Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, plenum, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -4 Color Options -Safe for Pressurized Applications Learn More -
Juke Catch Can Kit - For all years (turbo only)
Regular Price: $199.00
Special Price $159.78
2JR Complete Catch Can Kit for the Juke all years (turbo only). Fits all models of Jukes - AWD/FWD, including Gen1 and Gen2 Engines. Arrives with all the lines precut for ease of installation, billet mounting bracket, spring clamps, optional drain kit and engraving. 4 Color Choices available. Please know that each kit is built to your order specifications and can take approx 2 weeks to ship depending on production cycle. FOR INSTALL INSTRUCTIONS - REFER TO THE VIDEO ON THE 2JR FACEBOOK PAGE AND/OR YOUTUBE CHANNEL! https://fb.watch/aQ1zl1Ar1m/ Benefits: -Effectively raises the octane and increases engine performance from cleaner inlet air -Prevents oil buildup in the intake, intercooler, throttle body, etc. -Excessive oil collection can be an indicator of a damaged engine -Lowers hydrocarbon emissions Features: -6061 Billet Aluminum O-Ring Sealed Oil Can -Integrated Oil Separating Condensing -Billet 6061 1/2" thick mounting bracket with stainless hardware -All precut lines/fittings and spring clamps -Optional Drain Kit -3 Color Options -Safe for Pressurized Applications Learn More