Search results for 'Throttle body swap'
-
B15 OEM or Full Race Axle Set QR25
Regular Price: $999.99
Special Price $589.00
Sold as a pair. You have the option of getting OEM axles - or Race axles. OEMs are good for up to 500whp, while the race axles are good to over 600whp. The race axles have 38mm upgraded center shafts, forged chromoly cages, increased ball/cup design, high temp race CV grease, Neoprene road race boots and vented center sections for handling speeds in excess of 150mph for continued use. For RACE axles - *Customer Must Supply OEM Axles* **Must be factory axles with 100AC stamped into the inner CV housings Learn More -
Mishimoto 2013-Current Ford Focus ST Gold Intercooler w/ Polished Pipes
$1,030.95It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We?ve replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty. Learn More -
B15 JWT Turbo Reflash (02-03)
$595.99Finally a JWT reflash for your turbo 02-03 B15 ECU (QR25). Good for up to 350whp. For best performance, must match up with our 2JR injectors as the tune is based specifically off these injectors. Lead time is approximately 3 weeks for a reflash once the ECU is received.Reflashes your 02-03 Spec-V ECU for:
- 2JR Siemens Injectors
- Stock MAF
- 9.5-1 or 8.5-1 Compression
- Speed Limiter Removal
- Increased Rev Limiter
-
B15 JWT N/A Reflash 02-03 Spec-V
Regular Price: $329.99
Special Price $299.99
Custom reflash by JWT to removes your speed limiter and raised the rev limit to your choice. For 02-03 ECUs ONLY. JWT turn around time is min 3 weeks. We also offer a core swap. We send in our 02-03 ECU to be flashed. Once complete JWT will send it to you and you return your working 02-03 ECU to us. Core is $375, less $25 shipping. You'll receive a $350 refund when your ECU is received back. CORE SWAP ONLY FOR NON-NATS CARS! Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
10mm Street Traction Spacer (ALK) B15
Regular Price: $95.99
Special Price $49.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, and take control of your car. The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. NOW includes hardened pins and 6 50mm bolts. Learn More -
15mm Race Spec 2JR Traction Spacer (ALK) B15
Regular Price: $139.99
Special Price $69.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, take control of your car. Does what our 10mm spacer does, only better!! The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. Includes hardened pins and 6 50mm bolts. Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
2JR Hi-Power Intake Plenum-Full Kit
Regular Price: $899.99
Special Price $699.00
2JR introduces the best intake plenum for your 1st gen QR with custom CNC milled throttle plates, machined and decked head surfaces to maximize power and gains while providing no ECU fault codes or issues. Huge mid range gains with excellent top end performance. No tune is required. For both NA (low and high comp) and forced induction applications (up to 20psi). Expect quicker throttle response and improved driveability. Both on and off the street. Includes a new high-capacity fuel rail and all hardware necessary for a complete install. Optional is our 2JR 1-piece Moto-style cold air intake. Save over $45 when you purchase both together. NOTE! IF YOU ADD THE 76MM PLENUM SPACER MOD - YOU DONT NEED THE 5" SILICON COUPLER. The plenum spacer mod adds a ton of volume to the hi-power plenum. Its a MUST HAVE! OVER 28whp in the midrange. The highest hp mod available for the B15. Install instructions: https://www.facebook.com/206550699368164/videos/148839433766275 Learn More -
Mail In UpRev Reflash Service - Send in your ECU
Regular Price: $479.00
Special Price $399.00
Whether you are normally aspirated with bolt ons or turbocharged, with over 300 ROM tunes in our library we can make your Nissan run faster and make more power. We have logged 1000+ dyno pulls with different mod combinations. Send your ECU to 2JR, and in 24hrs (1 business day) we will ship back to you a Uprev/2JR tuned ECU. Ship to: 2J-Racing 1685 Redi Rd Cumming GA 30040 Parameters that we will tune include: Idle RPM Speed Limiter Electronic Throttle Control to achieve Wide Open Throttle at all speeds. Rev Limiter DTC disable AFR Targets Fuel Compensation (for NA or Turbo cars) Ignition Timing Advance Cam Phasing Learn More -
UpRev Tuner Package - Edit your own tune! includes cable, license and 2JR Tune + Base Tune
Regular Price: $775.00
Special Price $729.99
UpRev Tuner includes: 1 Interface Cable, 1 UpRev Re-Flash license, ROM Editor, Stock ROM, and Back to Stock ROM. UpRev Tuning Suite is a Windows-based software; you will need a Windows-based laptop or a tablet that runs a full version of Windows for flashing the Base Tune and for data logging. (8,10 or newer) 2JR will provide a ROM file to allow you to Flash your ECU based on your engine specs sent to 2JR Up to 3 Maps on cruise control equipped vehicles Idle RPM Speed Limiter Electronic Throttle Control to achieve Wide Open Throttle at all speeds. Rev Limiter DTC disable AFR Targets Fuel Compensation (for NA or Turbo cars) Ignition Timing Advance Cam Phasing Learn More -
Fiesta ST - COBB Rear Motor Mount
Regular Price: $155.00
Special Price $152.00
The COBB Ford Fiesta ST Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB Ford Fiesta ST RMM utilizes unique voids custom molded into the larger 68A durometer bushing and a smaller 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount will make you sad you have to hide it under your car. Learn More -
Tein 02-06 Nissan Sentra Street Basis Z Coilovers B15 (all models)
Regular Price: $817.00
Special Price $798.89
TEIN Dampers - Street Basis Z - for all B15 models 1.8L and 2.5L : TEIN Street Basis Damper is the evolution of the popular BASIC coilover model. It incorporates new internal and external components, newly developed coatings and new manufacturing processes.
TEIN engineers have spent many hours developing new seals and internal components to improve durability and product life. This was one of our major goals for the new model.
Newly developed “ZT” coating for improved durability and hassle-free ride height adjustment. TEIN developed this coating in-house after stringent test and analysis procedures. Our engineers tested different coats, application methods, cleaning processes, etc… in our own brine salt water testing machine which simulates heavy solvents/ road salts used in cold weather climates.
Slip-fit threaded adjustment tube. Allows for damper body and threaded sleeve to be thoroughly coated for rust/ corrosion protection.
The slip-fit allows a more thorough coating on the threaded section as well as powder coated damper body.
Revised Aluminum Spring Seat and Delrin Thrust Washer are light weight and durable. This combination allows for smooth ride height adjustment. The new spring seats have a larger contact surface area and eliminate the need for a rubber spring seat.
Learn More -
Yellow Fog Light Set - (01-03 Sentra) all models
Regular Price: $89.99
Special Price $39.99
Yellow hi-strength fog lights for all 01-03 Sentra models. Comes with 55w bulb. Bright as hell and no film, the lens is manufactured yellow. You will have to remove the cover on your OEM fogs with the clip to use on these. Easy swap! Fits all GXE and SER and SpecV models. Learn More -
Fiesta ST - Wilwood Rear Big Brake Kit
Regular Price: $992.49
Special Price $979.88
Upgrade to 11.75" rear rotors and wilwood calipers. Available in Black, Red and smooth or drilled rotors. YOU MUST CHOOSE THE TIMKEN REAR HUBS TO FIT THIS BRAKE KIT! No cutting, drilling is required and the hubs swap out in 15mins with 4 simple bolts. 2JR provides new hardware for the rear hubs. Combination hydro-mechanical Parking Brake calipers use hydraulic pressure from the master cylinder for stopping power, and an internal mechanical lock within the caliper for a parking brake. CPB kits are built primarily for front wheel drive vehicles, and select rear wheel drive axles that are not well suited for internal shoe style parking brakes. The calipers are coupled with oversized two-piece rotor assemblies with aluminum hats and high friction BP-10 compound pads. CPB kits provide the correct balanced brake performance and matching style to compliment front big brake upgrade kits.. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. 2JR allows you to choose your brake pad compound / Rotor Type and Color BP10 - Street PM - ProMatrix (low dust/higher performance) Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
02-06 B15 Sentra VQ Engine Mount Kit
Regular Price: $599.99
Special Price $349.99
Mount a FWD VQ35DE in your Sentra correctly with 2JR's billet mount kit. Includes front and rear solid delrin mounts, billet brackets for the front lower mount, axle carrier, axle spacer and passenger side mount. Take the guess work out of the install and do it right! Also available are full VQ install wiring harnesses, headers, UpRev and other swap parts. Learn More -
Focus ST - Bilstein Coilover Kit - B14 PSS Monotube
Regular Price: $1,375.14
Special Price $929.99
Focus ST - Bilstein Coilover Kit - B14 PSS Monotube The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs. *The product benefits at a glance:* * Threaded body adjustable range of 20 mm * Lowering of approx. 30-50 mm at front and rear * Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions * Aluminum Spring plates and lock nuts * Surface coating using Triple-C-Technology®for long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * BILSTEIN monotube technology, made in Germany Learn More -
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L)
Regular Price: $579.99
Special Price $429.78
2007+ Sentra / Altima Medusa Header / optional Midpipe (QR25 2.5L) Application - Header Only 2007 - 2012 2.5L Nissan Sentra 2007 - 2019 2.5L NIssan Altima (coupe and sedan) Application - Midpipe 2007 - 2012 2.5L Nissan Sentra (only) Midpipe will not fit Altima Coupe or Sedan The wait is finally over! The Medusa MB16 header is here!. Through continuous testing 2JR has improved the already dominate Medusa header with performance upgrades. Port changes to Oval Head Port Matched Flanges for a perfect seal - Longer runners by 4" over the V1 Medusa produce a higher mid-high rpm HP performance. And stepped runner design from 1.7" to 1.9" from the Spyder header help improve scavenging and broaden the torque curve. The MB16 Medusa is UEL (unequal length) and provides a "boxer-like" rumble at idle and under throttle. Slim fans and ACB ARE NOT required for fitment. Simply install and enjoy the performance and rumble from your Lt Ed MB16 Medusa. Made from 304SS Stainless. Bolts directly to your factory midpipe or step up to the 2JR 70mm Stainless Midpipe for even more power and roar! Learn More -
Borla 2012-Current Ford Focus SE Hatchback w/o Sport Package 2.0L 4cyl SS Catback Exhaust
Regular Price: $699.99
Special Price $690.99
The BORLA® sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA® exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA®, we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA® engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA® exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound. Learn More