Search results for 'bent rear'
-
B14 / B15 / Maxima Panhard Rod - Rear Roll Center Correction
Regular Price: $1,250.00
Special Price $980.00
The height of the rear roll center is critical to handling. When you remove the OEM Link on the Nissan Twist Beam suspension and add a panhard bar the rear roll center drops. A lowered rear roll center promotes side bite at the rear which tends to tighten corner handling. 2J Exclusive! Price includes labor/installation. Panhard rod is not available for shipping. Learn More -
B15 12.3" Rear Big Brake Kit
Regular Price: $399.99
Special Price $299.99
Improve your stopping performance by 140% with our 12.3" Rear Brakes! This is the ultimate Rear Brake Setup for your B15, used on our race car to haul down speeds in excess of 160mph. This kit replaces the small stock 10" rear rotors with 12.3" rotors and brackets for excellent street and track performance. Slotted and drilled and Black E-coated for no rust and long life. Includes all hardware. Bolts directly to your stock caliper with 2JR supplied hardware. 3 years of racing and 2JR has yet to wear out 1 set of these rotors. Learn More -
2JR Billet Wheel Spacers with optional Forged Studs / Lugs
Regular Price: $39.99
Special Price $17.98
2JR wheel spacers give your car improved roll center and better stance. Made from billet 6061, our hub centric come with 67.1mm center bore to fit all Nissans. 10mm is not recommended for the rear of the b15 chassis due to the length of the hub. Double drilled 4x114.3 AND 5x114.3. By adding track width, we dropped our laptimes at Road Atlanta by almost 2 secs. We also saw improved tire wear. All +5mm spacers are hubcentric for perfect fitment - you don't need to add studs other than stock studs. 2JR 55mm studs are required for the 15mm spacers and 82mm studs are suggested for the 20mm spacers. Open Lugs are not required; however, for a race-look add the 2JR forged chromoly Black lug open lug nuts. Solid, built for life - used on our race car. Sold as a pair. Learn More -
2JR 25mm Fully Adjustable Rear Sway Bar (B15)
Regular Price: $349.99
Special Price $299.98
2JR 25mm Fully Adjustable Rear Sway Bar (B15)The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.
Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
-
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
2JR TrueCarbon Top Bin Cover
$114.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Top Bin Cover - 1.5m thick Regular Price: $85 GB Price - $65 Learn More -
2JR TrueCarbon Gauge Cluster - OEM
$235.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Gauge Cluster - OEM replacement Regular Price: $235 GB Price - $170 Learn More -
2JR TrueCarbon Rear Trunk Surround
$290.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Rear Trunk Center Cover - 1.5mm Regular Price: $290 GB Price - $205 Learn More -
SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro
Regular Price: $159.00
Special Price $110.99
After testing 1 set with excellent results, we have asked SuperPro to make a select set of only 10 sets of axle pivot bushings in 95K durometer for us. This is nearly 300% stronger than their normal Super Pro hardness and have grooved inner races for quiet operation to hold grease. And you reuse your original shell so install is fairly easy. Fits P10, P11, B15, N15, N16 Improve rear balance, turn in and eliminate understeer. Build for the street for no noise and track ready for full stiffness. LIMITED TO JUST 10 SETS. Learn More -
2JR Crossmember Delrin Bushings- Wheel Hop Aid (B13/B14/B15)
Regular Price: $59.99
Special Price $39.99
2002-2006 B15 Sentra 2.5L / Replace the old, worn out rubber OEM crossmember bushings with 2 piece delrin bushings from 2JR. Installed between the crossmember and chassis, at all four attachment points. Delrin absorbs some of the motor vibrations for a smoother ride. Zero flex, holds the motor solidly in place. SOLD as a set of 8 pieces, front and rear crossmember locations Can be used on a B13/14 - if you slightly open up the holes on the B13/14 crossmember. Very simple install
In Stock
Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
2JR Complete 5 Lug Conversion Kit (5x114.3)
Regular Price: $499.00
Special Price $429.99
Includes: (all NEW / MACHINED PARTS) for 5x114.3 1. Pair Front Hubs 2. Pair Rear Hubs 3. Front Timken Race Wheel Bearings, Pair 4. Forged Aluminum Rear Sleeves 5. Choice of 82mm or 55mm 2JR Race Studs Rotors are OPTIONAL! Learn More -
Fiesta ST - COBB Rear Motor Mount
Regular Price: $155.00
Special Price $152.00
The COBB Ford Fiesta ST Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Typical bushing designs can rattle your teeth out at idle or during throttle input. The COBB Ford Fiesta ST RMM utilizes unique voids custom molded into the larger 68A durometer bushing and a smaller 85A durometer bushing to absorb vibrations, but still reduce engine movement to aid getting all the power to the ground. The beautifully machined 6061 billet aluminum mount will make you sad you have to hide it under your car. Learn More -
StopTech Stainless Steel Brake Lines: 2014 Fiesta ST
Regular Price: $142.99
Special Price $129.99
StopTech has just introduced their stainless steel brake lines for the 2014 Ford Fiesta ST. StopTech Braided Stainless Steel Brake Lines provide a quicker, firmer, more consistent pedal response by reducing system compliance and maintaining consistent brake pressure. StopTech brake lines consist of a PTFE inner line that carries the brake fluid, which is then covered with a layer of woven stainless steel braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. The stainless braided hose is also coated with a clear abrasion resistant PVC cover for maximum protection against chaffing.All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
Sold as a full kit. Front and Rear.
Learn More -
KYB Strut Mount-REAR
Regular Price: $43.09
Special Price $32.99
SOLD AS EACH! KYB Strut Mount: KYB Strut Mounts feature construction and fit that meets or exceeds original equipment specifications and are available for both domestic and import vehicles. Strut mounts play a vital role in improving the vehicles handling, ride control, alignment, braking, and steering and KYB strut mounts and boots are an integral part of proper strut service. They improve the quality of the installation while extending the life of the strut and enhancing the safety and performance of your vehicle.
**Drop ships from manufacturer
***Allow 10-15 days for delivery
Learn More -
Fiesta ST - Koni Orange Str.T Full Kit (Front / Rear)
Regular Price: $479.00
Special Price $429.00
Koni Shock - STR T Series: The range of Koni STR.T Shocks are totally new and are individually tailored and engineered to give your car that Koni sports feel. Koni STR.T Shocks give your car a feeling of improved handling and less roll. The fixed rate damping is based on our years of experience with our sport range of dampers and kits. The bright orange dampers are sure to look good on any vehicle. DIRECT FIT FOR FIESTA ST! *Features* * Entry level performance shock absorber * Compliments lower springs * Pefect for OE replacement or vehicle improvement * Non-adjustable * Lifetime Warranty *All Koni Shocks are sold 'per shock' a complete set requires four shocks* Learn More -
Fiesta ST - Wilwood Rear Big Brake Kit
Regular Price: $992.49
Special Price $979.88
Upgrade to 11.75" rear rotors and wilwood calipers. Available in Black, Red and smooth or drilled rotors. YOU MUST CHOOSE THE TIMKEN REAR HUBS TO FIT THIS BRAKE KIT! No cutting, drilling is required and the hubs swap out in 15mins with 4 simple bolts. 2JR provides new hardware for the rear hubs. Combination hydro-mechanical Parking Brake calipers use hydraulic pressure from the master cylinder for stopping power, and an internal mechanical lock within the caliper for a parking brake. CPB kits are built primarily for front wheel drive vehicles, and select rear wheel drive axles that are not well suited for internal shoe style parking brakes. The calipers are coupled with oversized two-piece rotor assemblies with aluminum hats and high friction BP-10 compound pads. CPB kits provide the correct balanced brake performance and matching style to compliment front big brake upgrade kits.. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. 2JR allows you to choose your brake pad compound / Rotor Type and Color BP10 - Street PM - ProMatrix (low dust/higher performance) Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
Fiesta ST - Injen 3" Cat-Back Stainless / Burnt SS Tip
Regular Price: $881.85
Special Price $845.71
Fiesta ST - Injen 3" Cat-Back Stainless / Burnt SS Tip Injen Super SES - Stainless Exhaust System: Injen Technology’s Super SES line of exhaust systems are dyno-tuned to compliment our performance intake systems; in doing so, the Super SES provides maximum horsepower and torque across the power band. The Super SES exhaust system is manufactured from 100% 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing, CNC machined flanges, and robotic TIG welding. *Features* * 100% Stainless Steel Construction * Straight Through Muffler Design * Robotic Tig Welds * Injen’s Unique Flared Tip Design * Burnt SS Tip SHIPS FREE IN 48 STATES THROUGH 8-31 Learn More