Search results for 'cam gears'
-
QR25 JWT Beehive Spring
$244.48QR25DE JWT BEEHIVE SPRING FOR USE WITH JWT COMPETITION CAMSHAFTS TO .600" LIFT. MUST USE RETAINER ARETN-BHIVE ON EARLY ENGINES. 35.96mm INSTALLED HEIGHT, USE ORIGINAL SPRING BASE SHIMS. Complete set FITS: ALTIMA 2002+, SENTRA 2.5L ENGINES: QR25DE Learn More -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More -
QR25 JWT CAMSHAFT SET S1 BILLET CAMS
Regular Price: $699.99
Special Price $649.98
CAMSHAFT SET QR25DE BILLET CAMS. GOOD IDLE AND DRIVABILITY WITH AN 8+HP GAIN. USES STOCKS SPRING AT STOCK REV CUT OR AQR25-SPRNG SPRING SET IF RUNNING TO 7200RPM.
FITS:
S1 Cam - Excellent street cam, good power and idle. Go with the best, JWT Learn More
ALTIMA, SENTRA, ALTIMA 2002+, SENTRA 2.5L,
ENGINES:
QR25DE, -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-8 JWT CAMSHAFT SET
$1,386.33High HP, Racing cam set. 272 DEG/.473 Must use JWT Valve Springs Learn More -
VQ35 C-9 JWT CAMSHAFT SET
$1,386.33Ultimate Race Cam for your VQ35 / 283.5 DEG/.516" MUST USE WITH JWT SPRING/SHIM SET Learn More -
VQ35 C-10 JWT CAMSHAFT SET
$1,386.33The biggest cam ever produced by JWT. MUST USE WITH JWT SPRING/SHIM, DOES NOT FIT REV-UP MOTOR (REQUIRES HEAD CLEARANCING) Learn More -
Mail In UpRev Reflash Service - Send in your ECU
Regular Price: $479.00
Special Price $399.00
Whether you are normally aspirated with bolt ons or turbocharged, with over 300 ROM tunes in our library we can make your Nissan run faster and make more power. We have logged 1000+ dyno pulls with different mod combinations. Send your ECU to 2JR, and in 24hrs (1 business day) we will ship back to you a Uprev/2JR tuned ECU. Ship to: 2J-Racing 1685 Redi Rd Cumming GA 30040 Parameters that we will tune include: Idle RPM Speed Limiter Electronic Throttle Control to achieve Wide Open Throttle at all speeds. Rev Limiter DTC disable AFR Targets Fuel Compensation (for NA or Turbo cars) Ignition Timing Advance Cam Phasing Learn More -
UpRev Tuner Package - Edit your own tune! includes cable, license and 2JR Tune + Base Tune
Regular Price: $775.00
Special Price $729.99
UpRev Tuner includes: 1 Interface Cable, 1 UpRev Re-Flash license, ROM Editor, Stock ROM, and Back to Stock ROM. UpRev Tuning Suite is a Windows-based software; you will need a Windows-based laptop or a tablet that runs a full version of Windows for flashing the Base Tune and for data logging. (8,10 or newer) 2JR will provide a ROM file to allow you to Flash your ECU based on your engine specs sent to 2JR Up to 3 Maps on cruise control equipped vehicles Idle RPM Speed Limiter Electronic Throttle Control to achieve Wide Open Throttle at all speeds. Rev Limiter DTC disable AFR Targets Fuel Compensation (for NA or Turbo cars) Ignition Timing Advance Cam Phasing Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails -
B15 Handling Pack - RCK and UPGRADED Bump Steer Kit
Regular Price: $329.99
Special Price $199.98
NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More -
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
H&R TC112 Triple Camber Adjustment Bolts
$79.95H&R Triple C Camber Adjustment Bolts: Whenever you lower a vehicle’s ride height, negative camber is increased –– how much depends on the vehicle and the reduction in ride height. H&R ‘Triple C’ Camber Adjustment Bolts are a simple, yet very effective means of removing excessive camber, adjusting your vehicle’s camber settings, or even correcting small side-to-side camber variations for precise alignment. Consisting of a pair of specially-designed bolts, H&R patented ‘Triple C’ Camber Adjustment Bolts replace the original upper fastening bolts on McPherson strut applications. As the bolt is turned, a small cam eccentric alters the vehicle’s camber, allowing adjustments from 0-3 degrees, positive or negative. Installation takes only minutes with readily available hand tools, and benefits include increased tire life, improved tracking and the ability to dial in more camber for weekend track events. Quite simply, H&R ‘Triple C’ Camber Adjustment Bolts are a great value. No other single suspension modification can yield such impressive results with such a small investment in time and money –– and you can do it yourself.
**Drop ship from manufacturer
Learn More -
2JR QR25 Hi-Power RZ Cams (2002-2012 QR25DE)
Regular Price: $699.99
Special Price $649.99
2JR in conjunction with JWT releases the highest hp cam set available for the (02-12) QR25. With gains up to 235whp on race gas. 2 years of dyno testing, track use and street testing has perfected these cam sets. A tune IS required for the performance of these cams. THEY ONLY WORK ON HIGH COMP and WILL LOSE SOME LOW END UNDER 3K - 15HP. But they will scream after 5k and can rev past 8K However, they will produce a lopey idle. Everyone will know your QR is cammed! Cam gear is not included and CANNOT be used on these high lift cams Available for both 02-06 QRs and 07-12 QRs - Will fit Sentra, Altima and Frontier - all years with 2.5L Engines Learn More -
(02-06) QR25DE Complete Engine (Street or Race)
Regular Price: $4,200.00
Special Price $3,990.00
(02-06) QR25DE Complete Engine 2JR Fully Built QR Engines are now available. Built to your specs, for NA, High Comp or Boost - including sleeved blocks capable of +700whp. No one has built more QRs than 2J with a commitment to quality and excellence. Engines are drop shipped to your location, ready for install or have us remove and install your new engine. Head Work – Machined Head 5 Angle valve angle job New OEM valves seals Cam Buckets (clearance to spec) OEM Cam Sets Cometic Headgasket Block – Balanced and Blueprinted, Assembled with Head (Long Block – complete/assembled) OEM Piston Set 9.5-1 Compression (Thicker Ring Lands & Better Quench Pads) Block Honed 2JRacing H Beam or I Beam Forged Rod Sets ARP Rod Bolts ARP Head Bolts ACL Main and Rod Bearings New OEM Front Cover (oil pump) New Water Pump JWT BSR Kit Complete Timing Equipment (chain, guides, tensioner, and sprocket) ALL New OEM Seals, Gaskets, O-Rings and Plugs New OEM Cam and Crank Sensors NGK LFR6A-11 Plugs Learn More -
2JR High Comp Short Block (10.0-1)
Regular Price: $2,699.99
Special Price $2,199.99
2JR High Comp Short Block built with B16 SpecV High Comp Pistons, B15 SpecV Rods and B15 SpecV Crank. Machined with ACL bearings, new OEM mains. Ready to drop in your 02-06 B15! Just add your head or a fresh 2JR head with 2JR valve springs for $599 more. This motor, with 2JR cams and plenum made 255 crank hp, NA on pump gas. 1. B16 SpecV High Comp Pistons - 10.1-1 2. B15 Spec-V Rods 3. B15 SpecV Crank 4. ACL Bearings Learn More -
02-03 Spec-V UpRev Full Conversion Kit - with 2JR Tune
Regular Price: $1,399.00
Special Price $1,299.78
Finally available, 2JR's full UpRev conversion for the 02-03 SpecV. Fully tunable with 5 preloaded maps on the ECU, switchable with the cruise control buttons. A must have for all big power, turbo, NA and track builds. Full control of cam phasing, Rev Limits, Fuel maps, injectors, timing, launch control, permanently turning off codes, removing NATS, etc. Includes 1. 06 SpecV Gauge Cluster 2. 06 SpecV Gas Pedal 3. 06 SpecV Wideband - for the ECU 4. 06 SpecV MAF Sensor 5. 06 SpecV MAF Housing 6. 06 SpecV Wideband Pigtail 7. 06 SpecV MAF Pigtail 8. Full Plug and Play Patch Harness 9. 06 SpecV ECU 10. UpRev License - unlocks 11. 2JR Tune based on your mods Install instructions included Learn More