Search results for 'nissan+juke'
-
Nissan Juke Lightweight Pulley - fits all Jukes, inc Nismo and RS
Regular Price: $134.99
Special Price $99.98
2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOT NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Fits all 1.6L Turbo (MR16DDT) Juke models, incl Nismo, RS, Fwd, AWD, manual and CVT. Learn More -
Injen 11-14 Nissan Juke 1.6L Turbo 4 cyl (incl Nismo) Upper Intercooler Pipe Kit
Regular Price: $489.67
Special Price $469.78
Intercooler Piping Kit; Upper IC Piping; Incl Machined BOV Flange & Sensor Flange; Incl Clamps & Silicone Hoses Color - Polished or Black Injen Intercooler Piping Kits are the new standard on high performance turbocharged vehicles. Utilizing T6 60601 Aluminum you can be sure your turbocharged motor will be breathing the coolest and most consistent air. Bolt on kits include all necessary hoses and couples for easy installation! Learn More -
GFB 11-14 Nissan JUKE 1.6L Turbo TMS Respons Blow Off Valve Kit
Regular Price: $279.98
Special Price $264.78
GFB 11-14 Nissan JUKE 1.6L Turbo TMS Respons Blow Off Valve Kit Tests show that TMS features can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears. On top of the TMS benefits, the Respons also packs GFB’s patented adjustable venting bias system found on the Stealth FX. This unique system allows the amount of air vented to either recirc or atmosphere to be infinitely varied to change the venting sound like a stereo volume dial! So if you want noise with your performance, the Response can deliver! By fine-tuning the venting ratio, you CAN achieve a blow-off sound WITHOUT throwing a CEL, running rich, stalling, using more fuel or causing any other problems commonly associated with atmo-venting valves on cars with MAF sensors. *Features* * Advanced TMS benefits * Spring pre-load adjustment for max. response * Venting configurations: - Full progressive bias adjustment from recirc (silent) to atmosphere (loud) - Bias adjustment done manually via cap ring - C an be locked off in full recirc mode for legality purposes Learn More -
Nissan Juke Turbosmart Kompact Series Plumb Back BOV
Regular Price: $166.04
Special Price $159.99
Nissan Juke Turbosmart Kompact Series Plumb Back BOV 2011-2014 and Nismo RS (all years) The Kompact Series BOVs have been designed as a bolt-on replacement for the Nissan Juke - all years, the Kompact Series products offer superior flow, full adjustability and greater structural integrity under boost. Ideal for cars with constrained engine bay access *DESCRIPTION:* Fully recirculating BOV. The Plumb Back systems vents all excess pressure back into the intake system. Great for enthusiast not wanting to be noticed. Learn More -
Nissan Juke AEM Cold Air Intake (11-14)
Regular Price: $399.98
Special Price $389.00
Nissan Juke AEM Cold Air Intake Fits 2011-2014 (and all Nismo RS) Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. Piping Color - Gunmetal Part: aem21-734C Learn More -
Juke 340LPH Direct Fit Fuel Pump - all years
Regular Price: $179.99
Special Price $99.99
2JR High Volume 340LPR Race Fuel Pump for the Nissan Juke. 2JR uses the exact same internals as the OEM Bosch Pump but we upgrade the motor armature with less turns, thicker wire, for 90% more rpm, which means more flow. Our pump is a direct drop in to our Juke Nissan canisters. No cutting or trimming is required.! All Walboro and other aftermarket fuel pumps are too long which makes for a difficult install. Direct fitment in your Juke INSTALL VIDEO https://youtu.be/_21sk6yaarw Fits all years, all models Compatible with E85 For Turbo Builds over 350whp Also available is 255LPR pump Learn More -
High Performance Juke Stainless Brake Line Set
Regular Price: $142.99
Special Price $109.98
2JR Nissan Juke Stainless Steel brake lines provide a quicker, firmer, more consistent pedal response by reducing system compliance and maintaining consistent brake pressure. Our Brake lines consist of a PTFE inner line that carries the brake fluid, which is then covered with a layer of woven stainless steel braid. The stainless braided hose is also coated with a smoked abrasion resistant PVC cover for maximum protection against chaffing.All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit.
Sold as a full kit. Front and Rear. Production time is approx 3 weeks.
Add 2 Bottles of Motul 5.1 Brake Fluid for $19.99
100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers' recommendations. Specially designed for anti-locking brake systems (ABS). 100% synthetic. Dry boiling point: 272C / 522F. Wet boiling point: 185C / 365F. Standards:
Learn More -
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
2JR Street Performance AWD 70mm Stainless Juke Catback
Regular Price: $829.99
Special Price $719.98
2JR is doing a limited run of Street Performance AWD Catbacks exhausts for the Nissan Juke - all years/models. 2JR uses all Vibrant components on the AWD exhaust. Starting with 304 stainless flanges to a 70mm stainless midsection and vibrant stainless 18" resonator. Then we incorporate a smooth tapered conical section to increase the piping size to 70mm and use a Vibrant Tail Section. Excellent sound quality, great power increases with the tapered piping and sizing. All handbuilt and TIG welded by 2JR. Will fit over your OEM Midpipe. This exhaust is very quiet on your AWD CVT. You have the option to add the center resonator for $45 if you prefer it quiet. Or run without the center resonator for 8db more sound. Nismo Style Rear Tip - fits perfectly on all models. Sound clips here! This is with our AWD Downpipe and midpipe combo https://www.youtube.com/watch?v=HuOkFKFEDq0&feature=youtu.be&fbclid=IwAR3juZs_WoCSYaSQEtoPnvZ9IUvmd_rq1cLABeTzHmVbr5PO6WmOqIKsCTI Learn More -
2JR Juke Remote UpRev Tuning - includes standard cable, license and 2JR Tune
Regular Price: $850.99
Special Price $799.78
For V1 Motors and all RS models ONLY (2011-2014 all models, and RS all years) Will not work on V2 Juke Motors - 2015 and Up (except RS) Allow 2JR to remotely tune your Nissan Juke via UpRev. 2JR provides the license, cable and software links - and works their tuning expertise to dial in your Juke based on your mods and driving style (street / autox / track). 2JR will walk you through the process of simply datalogging the ECU during driving and we will review your data and provide a tune back to you. Typically 6-8 datalogging sessions are required to dial it in to 2JR's high tuning standards. This can take up to two weeks of working with you - so certainly your patience is always appreciated through this process. FYI - your UpRev license can always be flashed back to the cable and the cable sold in the future should you sell your vehicle / part out. This can also be done if you are going in for warranty work. 2JR can provide you with the back to stock rom in these situations at no charge. Learn More -
2JR SRI/CAI Intake for 2011-2014 Nissan Juke and RS (all years) - V1 Motor
Regular Price: $229.98
Special Price $159.00
Sentra SR/Nismo/Juke Cold Air Intake - 2JR V1 Juke Intake - can be purchased as either an SRI (short ram intake) or CAI (full cold air intake) whereas the filter resides in the the space b/w the chassis and driver fender. The 2JR CAI can be converted to a Short Ram in minutes for the winter/weather issues. You can also add the K&N Filter sock to keep your filter clean and dry. Additionally - our intake does not require the adapter pipe to the turbo - its already part of the SRI! No additional piping required. For the CAI, our intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver large power gains. We also monitor fuel trim correction factors and all OBDII sensors during product development to eliminate leaning the engine out and/or throwing a check engine light. Available in two versions - Short Ram Version and the Full Cold Air Version. Fitment: Fits all V1 Engine Jukes (2011-14) for both AWD and FWD, this includes ALL YEARS for the Nismo RS model which still uses the V1 motor after 2014. Available in Polished / Wrinkle Red / Gloss Black Colors will add 2 weeks Learn More -
2JR Hard Piping Kit for 2011-2014 Nissan Juke and RS (all years) - V1 Motor
Regular Price: $389.00
Special Price $329.98
As with all intercooler hard-pipe kits, the stock plastic pipes to and from the intercooler are replaced with solid pipes to eliminate distortion under boost. But the devil is in the details, and that is where similarities end. The 2JR V1 MR16DDT Hard-Pipe Kit for the 2011-2014 Juke and RS consists of mandrel pipes made from aluminum tubing on both the cold side and hot side of the intercooler. Not only are these more durable and look incredible, but the piping size is increased over stock and there is no flex under heavy boost loads. Includes all couplers and clamps for a proper install on an OEM intercooler. Piping is available in polished, wrinkle red or black. NOTE: Powdercoating may add 3 weeks to delivery time. Includes both Hot and Cold side piping, couplers, and clamps. Fitment: Fits all V1 Engine Jukes (2011-14) for both AWD and FWD, this includes ALL YEARS for the Nismo RS model which still uses the V1 motor after 2014. Simple install in 1hour with hand tools. Learn More -
Injen 2011-2014 Nissan Juke Full Cold Air Intake (Black)
Regular Price: $316.78
Special Price $292.78
Injen 2011-2014 Nissan Juke Full Cold Air Intake (Black) Fits 2011-2014 Juke and All Nismo RS Models (only 1.6L Turbo Models) Full Cold Air Intake - Gloss Black Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. Learn More -
Injen 2011-2014 Nissan Juke Full Cold Air Intake (Polished)
Regular Price: $316.98
Special Price $292.78
Fits 2011-2014 Juke and All Nismo RS Models (only 1.6L Turbo Models) Full Cold Air Intake Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. Learn More -
K&N Typhoon Performance Intake Kit (2011-2014) Juke
Regular Price: $399.98
Special Price $378.98
K&N Typhoon Performance Intake Kit (2011-2014) Juke Fits all turbo (MR16DDT) Juke Models 2011-2014 Fits all RS Models, all years The K&N 69-7079TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan Juke models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7079TS air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and fresh air intake tube. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
Injen 2011-2014 Nissan Juke Full Cold Air Intake (Wrinkle Red)
Regular Price: $332.98
Special Price $292.78
Injen 2011-2014 Nissan Juke Full Cold Air Intake (Wrinkle Red) Direct fit for 2011-2014 Nissan Juke L4-1.6L Turbo All Years for Nismo RS Models (2011-2017) Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. CARB EO #: D-476-8 CARB EO applies to 2011-2014 model years only Learn More -
AWD Injen Nissan Juke (incl Nismo) Polished Stainless Steel Catback Exhaust
Regular Price: $949.78
Special Price $899.78
Injen Technologys Super SES line of exhaust systems are dyno-tuned to compliment our performance intake systems; in doing so the Super SES provides maximum horsepower and torque across the power band. The Super SES exhaust system is manufactured from 100% 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing CNC machined flanges and robotic TIG welding. Fits AWD ONLY Learn More -
GReddy FWD Nissan Juke Evolution GT Exhaust
Regular Price: $700.00
Special Price $665.79
The evolution continues with new GReddy EVOlution GT exhaust line. Improved and refined, this latest generation of Evo exhaust incorporates our new high flow straight-through internals and limited lifetime warranty. It also retains the benefits of the compact and efficient, offset-tip design of the previous Evo’s muffler. Each EVOlution GT is carefully constructed from precision TIG welded, high quality 304 stainless-steel. High flow with a deep rich exhaust note is what the GReddy Evo line is know for. For FWD Jukes - all years Learn More -
FWD Injen Nissan Juke 1.6L 4cyl Turbo (incl Nismo) SS Cat-Back Exhaust
Regular Price: $999.89
Special Price $929.89
Injen Technology’s Super SES line of exhaust systems are dyno-tuned to compliment our performance intake systems; in doing so, the Super SES provides maximum horsepower and torque across the power band. The Super SES exhaust system is manufactured from 100% 304 stainless steel. Each exhaust system features CNC mandrel-bent stainless steel tubing, CNC machined flanges, and robotic TIG welding. FWD ONLY *Features* * 100% Stainless Steel Construction * Straight Through Muffler Design * Robotic Tig Welds * Injen’s Unique Flared Tip Design Learn More -
MagnaFlow 2014-Current Nissan Juke L4 1.6L Turbocharged Straight D/S Rear Exit Stainless Cat-Back Perf Exh
Regular Price: $666.90
Special Price $624.99
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Learn More