Search results for 'tie rod'
-
B14 / B15 / Maxima Panhard Rod - Rear Roll Center Correction
Regular Price: $1,250.00
Special Price $980.00
The height of the rear roll center is critical to handling. When you remove the OEM Link on the Nissan Twist Beam suspension and add a panhard bar the rear roll center drops. A lowered rear roll center promotes side bite at the rear which tends to tighten corner handling. 2J Exclusive! Price includes labor/installation. Panhard rod is not available for shipping. Learn More -
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
VQ35 C-10 JWT CAMSHAFT SET
$1,386.33The biggest cam ever produced by JWT. MUST USE WITH JWT SPRING/SHIM, DOES NOT FIT REV-UP MOTOR (REQUIRES HEAD CLEARANCING) Learn More -
Nissan Sentra Lightweight Racing Pulley 2.5L, QR25DE, Fits Sentra, Altima, Frontier
Regular Price: $129.99
Special Price $99.98
Nets 5whp/5wtq! 2JR introduces a lightweight solid billet 6061 racing pulley that weighs 80% less than the stock pulley (5.1 lbs vs 1lb 2JR), which translates into less rotational mass and quicker revving. All pulleys are built with the factory timing marks and DO NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Fits all 2.5L Sentra B15, Sentra B16, Altima and Frontier
Choose between Red/Blue/Black. Also available with 2JR Powersteering pulley for all 02-06 2.5L QRs. Learn More -
Nissan Maxima / I35 / Murano 3.5L VQ35 Lightweight Race Pulley
Regular Price: $134.99
Special Price $92.99
Out of stock
IN STOCK NOW! 2JR introduces our lightweight race pulley for the VQ35 Maxima and Infiniti I35, 01-04 years. Based on a far better design than the OBX pulley with a 75% weight savings over OEM, this is a must have mod for your VQ. Offered ONLY in anodized BLACK, with 2JR Logo Fits 2001-2004 3.5L, FWD ONLY Requires: Gates belt part number is K060408 for Alternator/AC Gates belt part number is K040300 for Power Steering Gain 9whp / 12wtq! Learn More -
QG18DE (1.8L) B15 Sentra Lightweight Racing Pulley (01-06)
Regular Price: $149.99
Special Price $119.99
FINAL RUN / SMALL BATCH (1.8L) B15 Sentra Lightweight Racing Pulley (01-06) Weighing only 1lb 9oz. 2JR introduces a lightweight solid billet 6061 racing pulley that weighs 82% less than the stock pulley, which translates into less rotational mass and quicker revving. All pulleys are built with the factory timing marks and DO NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Grab yours on the final limited run. IN STOCK Learn More -
Nissan Juke Lightweight Pulley - fits all Jukes, inc Nismo and RS
Regular Price: $134.99
Special Price $99.98
2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOT NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Fits all 1.6L Turbo (MR16DDT) Juke models, incl Nismo, RS, Fwd, AWD, manual and CVT. Learn More -
Nissan B16 Sentra Lightweight Pulley 2.0L (MR20DE)
Regular Price: $134.99
Special Price $99.98
2JR introduces a lightweight solid billet 6061 racing pulley that weighs over 80% less than the stock pulley at just 15 ounces! Which translates into less rotational mass and quicker revving. All pulleys are anodized, balanced and DOT NO require a belt change. This is a simple bolt on for more power in less than 30mins. Includes 2JR engraved logo. Fits all 2.0L MR20DE Nissan Sentras, 2007-2013 Learn More -
2JR Forged Steel Flywheel - QR25DE 14lbs
Regular Price: $419.99
Special Price $299.99
2JR introduces an American Made lightweight steel flywheel (ST) is recommended for all QR25 clutch kits. Perfect flywheel for upgrading over the massively heavy OEM dual mass flywheel which is prone to split apart and break. Recommended for naturally aspirated and or street driven applications. This flywheel preserves low end torque and drivability. Well suited for our Stage II, III, and IV clutch kits. Direct bolt on and fits OEM size clutches (9.25" disk and 2JR clutches with 9.5" disks). Stock Flywheel is 28lbs. Saves 14lbs! For Gen1 QRs (02-06) Learn More -
2JR Lower Control Arms with SuperPro Bushings
Regular Price: $501.99
Special Price $439.98
STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More -
2JR Hi-Power Intake Plenum-Full Kit
Regular Price: $899.99
Special Price $699.00
2JR introduces the best intake plenum for your 1st gen QR with custom CNC milled throttle plates, machined and decked head surfaces to maximize power and gains while providing no ECU fault codes or issues. Huge mid range gains with excellent top end performance. No tune is required. For both NA (low and high comp) and forced induction applications (up to 20psi). Expect quicker throttle response and improved driveability. Both on and off the street. Includes a new high-capacity fuel rail and all hardware necessary for a complete install. Optional is our 2JR 1-piece Moto-style cold air intake. Save over $45 when you purchase both together. NOTE! IF YOU ADD THE 76MM PLENUM SPACER MOD - YOU DONT NEED THE 5" SILICON COUPLER. The plenum spacer mod adds a ton of volume to the hi-power plenum. Its a MUST HAVE! OVER 28whp in the midrange. The highest hp mod available for the B15. Install instructions: https://www.facebook.com/206550699368164/videos/148839433766275 Learn More -
2JR SuperPro Front LCA Bushing Kit ONLY
Regular Price: $314.99
Special Price $251.99
2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More -
2JR TrueCarbon Top Bin Cover
$114.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Top Bin Cover - 1.5m thick Regular Price: $85 GB Price - $65 Learn More -
2JR TrueCarbon Gauge Cluster - OEM
$235.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Gauge Cluster - OEM replacement Regular Price: $235 GB Price - $170 Learn More -
2JR TrueCarbon Rear Trunk Surround
$290.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Rear Trunk Center Cover - 1.5mm Regular Price: $290 GB Price - $205 Learn More -
2JR HiPower I-Beam Rod Set (450whp)
Regular Price: $420.99
Special Price $399.99
2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.
H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness.
I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je
Learn More -
2JR HiPower H-Beam Rod Set (700whp)
Regular Price: $469.99
Special Price $429.99
2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.
H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness.
I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je
Learn More -
2JR QR25 High Performance Cast Piston Set with Rings 9.5-1
Regular Price: $349.99
Special Price $249.99
2JR produced turbo pistons with hastings racing ring set. Hard anodized piston domes to resist detonation. Thicker ring lands to prevent cracking. Moly coating on the skirts to lubricate piston walls. 9.5-1 Comp with the best anti-detonation quench pads on the piston tops. Good for up to 350whp. Can also be used on all NA projects since these pistons have the same comp ratio as the poorly designed B15 pistons. INCLUDES HASTINGS PISTON RINGS - Made in the USA Will fit on 2JR Forged I or H beam rods with tapered ends. Rods include ARP Rod bolts at no add't cost. Comes in the following sizes - standard .5 mm overbore (20 over) INCLUDES: 4 pistons Oil Ring and Comp Ring Set Piston Wrist Pins Wrist Pin Clips Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More
