Search results for 'turbo bolt'
-
B15 12.3" Rear Big Brake Kit
Regular Price: $399.99
Special Price $299.99
Improve your stopping performance by 140% with our 12.3" Rear Brakes! This is the ultimate Rear Brake Setup for your B15, used on our race car to haul down speeds in excess of 160mph. This kit replaces the small stock 10" rear rotors with 12.3" rotors and brackets for excellent street and track performance. Slotted and drilled and Black E-coated for no rust and long life. Includes all hardware. Bolts directly to your stock caliper with 2JR supplied hardware. 3 years of racing and 2JR has yet to wear out 1 set of these rotors. Learn More -
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
VIAS Block Plate Kit (VQ35DE)
Regular Price: $49.99
Special Price $40.00
- 1/4" High Quality CNC Machined Variable Intake Actuator Block Plate with engraved logo (Made from 6061 Billet Aluminum) - 3 Properly Sized Zinc Plated Flange Bolts - VIAS Control Solenoid Valve Vacuum Cap - Printed Detailed Installation Instructions with Photos - Two Die Cut Silver Vinyl NWP Engineering Decals Learn More -
B16 Sentra 2.5L Catback Exhaust (2007-2012)
Regular Price: $779.00
Special Price $689.98
Step up your power goals with a hand-made, tig welded, catback exhaust from 2JR for for your 07-12 Nissan Sentra. Specifically designed for the Second Gen QR25 B16 Chassis (Sentra), this is the best exhaust system available. Made from stainless steel and available in either a 2.5 (quietest) or 3.0 piping size. We use Magnaflow resonators and mufflers with a resonated carbon fiber tip. Bolts to the OEM midpipe for 2.5 systems. You must use the 2JR 3" midpipe for the 3" catback version. Sounds amazing with the 2JR MB16 Medusa Header, Midpipe and 2.5" catback. Huge power increases, deep - clean sound without rasp. Learn More -
10mm Street Traction Spacer (ALK) B15
Regular Price: $95.99
Special Price $49.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, and take control of your car. The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. NOW includes hardened pins and 6 50mm bolts. Learn More -
15mm Race Spec 2JR Traction Spacer (ALK) B15
Regular Price: $139.99
Special Price $69.98
The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, take control of your car. Does what our 10mm spacer does, only better!! The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. Includes hardened pins and 6 50mm bolts. Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
2JR Fiesta ST Hi-Power Downpipe 304SS
Regular Price: $329.99
Special Price $179.98
Made from 304SS Stainless, bolts to the OEM exhaust or 3" Catback System. The sound level of the full race to the catted downpipe is nearly same, only 7-10db at WOT. With our 2JR 3" catback and full race downpipe, its very streetable. The difference in WTQ vs the OEM downpipe is over 30ft/lbs. With our defouler (optional) - we never had a check engine light in over 20K miles and passed GA emissions testing. Now with lower bracket for strength With our 2JR 3" Catback, Full Race DP, Cobb AP (93map V1), and K&N Drop in Filter - we clicked off continuous 247-251wtq runs with varying between 200-202 whp. With the 2JR catted DP and the same mods, we turned mid 230wtq. Sound Clips (2JR 3" Catback with Full Race DP) Intake Sound http://1drv.ms/1ldXC1z Driveby http://1drv.ms/1ldXNtH Pull Off http://1drv.ms/1ldXUFR Learn More -
Intake Plenum Adaptor Set
Regular Price: $499.99
Special Price $399.99
Full plenum adapter set - includes the bolts, machined adapter plate to the head, machine TB spacer. Learn More -
2JR QR25DE Sleeved Block B15/B16
Regular Price: $2,899.98
Special Price $2,699.80
Finally! 2JR QR25 Blocks with Darton MID Sleeves, installed. The stock block tends to crack the liner after 400whp. These blocks are good to over 700whp while the Darton MID Sleeves are made of ductile iron and are able to hold over 1000hp. The sleeves are unfinished and will need to be honed to match your piston size. Benefits: Cast iron performance in an aluminum block Improved block integral strength Improved cooling NOTE: WHEN CHECKING OUT, SELECT FREE SHIPPING - SINCE YOU ALREADY CHOSE A SHIPPING OPTION ON THIS PAGE. YOU WILL RECEIVE A $250 CORE CHARGE WHEN A GOOD USABLE BLOCK IS RETURNED TO 2JR, THAT MEANS NO HOLES, ETC. Sleeving Process: includes the removal of the old sleeves, machining the block for the new sleeves, installation, and step decking. The process is done on a 3-axis CNC machine. Next the block is honed using a torque plate to simulates the QR cylinder head being bolted on and ensure the cylinder is as true as it was while in the honing machine. The QR is then line bored (where the crank sits) and honed to ensure its perfect. Each block is: - Hot tank cleaning - Darton MID Sleeves Installed - Bore & Hone w/ Torque Plate - Line Bore Learn More -
(02-06) QR25DE Complete Engine (Street or Race)
Regular Price: $4,200.00
Special Price $3,990.00
(02-06) QR25DE Complete Engine 2JR Fully Built QR Engines are now available. Built to your specs, for NA, High Comp or Boost - including sleeved blocks capable of +700whp. No one has built more QRs than 2J with a commitment to quality and excellence. Engines are drop shipped to your location, ready for install or have us remove and install your new engine. Head Work – Machined Head 5 Angle valve angle job New OEM valves seals Cam Buckets (clearance to spec) OEM Cam Sets Cometic Headgasket Block – Balanced and Blueprinted, Assembled with Head (Long Block – complete/assembled) OEM Piston Set 9.5-1 Compression (Thicker Ring Lands & Better Quench Pads) Block Honed 2JRacing H Beam or I Beam Forged Rod Sets ARP Rod Bolts ARP Head Bolts ACL Main and Rod Bearings New OEM Front Cover (oil pump) New Water Pump JWT BSR Kit Complete Timing Equipment (chain, guides, tensioner, and sprocket) ALL New OEM Seals, Gaskets, O-Rings and Plugs New OEM Cam and Crank Sensors NGK LFR6A-11 Plugs Learn More -
Fiesta ST - Wilwood Rear Big Brake Kit
Regular Price: $992.49
Special Price $979.88
Upgrade to 11.75" rear rotors and wilwood calipers. Available in Black, Red and smooth or drilled rotors. YOU MUST CHOOSE THE TIMKEN REAR HUBS TO FIT THIS BRAKE KIT! No cutting, drilling is required and the hubs swap out in 15mins with 4 simple bolts. 2JR provides new hardware for the rear hubs. Combination hydro-mechanical Parking Brake calipers use hydraulic pressure from the master cylinder for stopping power, and an internal mechanical lock within the caliper for a parking brake. CPB kits are built primarily for front wheel drive vehicles, and select rear wheel drive axles that are not well suited for internal shoe style parking brakes. The calipers are coupled with oversized two-piece rotor assemblies with aluminum hats and high friction BP-10 compound pads. CPB kits provide the correct balanced brake performance and matching style to compliment front big brake upgrade kits.. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. 2JR allows you to choose your brake pad compound / Rotor Type and Color BP10 - Street PM - ProMatrix (low dust/higher performance) Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
Fiesta ST - COBB Tuning Front Mount Intercooler with Piping Kit
Regular Price: $895.99
Special Price $799.00
Fiesta ST - COBB Tuning Front Mount Intercooler with Piping Kit COBB Tuning Front Mount Intercooler: Looking for an effective solution that will eliminate inconsistent power delivery from your turbocharged vehicle? Look no further than the all new COBB Tuning Front Mount Intercooler. The factory top mounted intercooler can easily be over worked and over heated due to its smaller size. In return, the intake air temperatures rise causing a loss in power. Replacing the factory intercooler with the COBB Tuning Front Mount Intercooler will ensure that your engine is receiving the coolest possible air, allowing you to enjoy more power that is also much more consistent! Learn More -
Kompact EM BOV VR2 Dual Port Products Blow Off Valve - Fiesta ST / Mustang EcoBoost
Regular Price: $242.99
Special Price $210.99
The award-winning Kompact EM series Blow-Off Valves, are the world’s first truly plug and play Blow-Off Valves. Simply unplug and unbolt your OEM Blow-Off Valve, and install ours in its place. … Patent pending integrated pressure control True plug and play upgrade Integrated proprietary high-temperature solenoid valve Billet construction with high-temperature o-rings Available in plumb back or dual port options Fits both the Fiesta ST and Mustang EcoBoost Learn More -
Fiesta ST - Mountune High Flow Induction Hose
Regular Price: $189.99
Special Price $174.99
Mountune High Flow Induction Hose The mountune High Flow Induction hose for the Fiesta ST was engineered to increase air flow to the turbocharger and replaces the restrictive factory hose between the air box and the turbocharger inlet pipe. The mountune High Flow Induction Hose features stainless steel wire reinforced sections to prevent deformation under engine load. Back to back comparisons with the OE hose on mountune's in house flow bench revealed an impressive improvement in air flow of over 35%. Available in Black , Blue, Red and Yellow. High quality silicone construction Machined alloy insert allows easy installation of original breather hose Stainless steel wire reinforced Easy installation Increased air flow and response Learn More -
B15 Japan-Spec 555 Steering Tie Rods / Ball Joints - Kit or Pair (02-06)
2JR offers Japan Spec 555 Inner and Outer Tie Rod kits for your B15 (all models). You can also add high spec 555 Ball Joints for long life. These are the highest quality OEM replacement inner and outer tie rods you can buy for your B15. No mods required - bolts right in. Improve your steering response -even better when the B15 was new with 555 parts. Learn More -
2JR Nissan/Toyota CNC Stainless Header Stud Kit
Regular Price: $119.87
Special Price $86.11
2JR Nissan/Toyota CNC Stainless Header Stud Kit Get rid of your original 14mm or 17mm bolts and huge spanner that doesn't fit in the tight gaps of a performance manifold. High Tensile M10 x 1.25 Stud and 12 point Nut set, you can use a nice compact 11mm 12pt socket/wrench to do the job properly. No more leaky manifolds, headers and no more busted knuckles and thrown tools! To make the job even easier, we have an internal hex socket in the end of the stud, so you can fit these with a hex key into the head. Stud Size: M10x1.25 to 3/8”-24 (Hex Socket) Stud Total length: 45mm Material: SS304 Nut: 12 Point Nuts (11mm socket/wrench) 7 x High Tensile 12 Point Nuts 7 x High Tensile M10x1.25 to 3/8”-24 45mm Long Studs 7 x Washers Learn More -
MR16DDT (Juke/B17 Sentra/Nismo) 2JR HiPower I-Beam Rod Set
Regular Price: $629.99
Special Price $519.78
2JR rod sets for the MR16DDT 1.6L are extremely durable, lightweight and will hold over 600whp. All come with ARP rod bolts.
Our I-Beam rods are extremely lightweight made from 4340 that is designed for all high hp applications in the 1.6L.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. These exact rods are used in the MRP Insane 650whp Juke
Fits all years - Juke, Pulsar - 1.6L
Learn More -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING
