Search results for 'vq'
-
Phenolic Thermal Intake Manifold Spacer Kit (VQ35DE)
$225.00Gains of 10hp and 12ft-lb of torque!
Average intake manifold temperature decrease of 40 degrees!Prevent heat from transferring from your heads to intake manifold and throttle body. Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible
Learn More -
VIAS Block Plate Kit (VQ35DE)
Regular Price: $49.99
Special Price $40.00
- 1/4" High Quality CNC Machined Variable Intake Actuator Block Plate with engraved logo (Made from 6061 Billet Aluminum) - 3 Properly Sized Zinc Plated Flange Bolts - VIAS Control Solenoid Valve Vacuum Cap - Printed Detailed Installation Instructions with Photos - Two Die Cut Silver Vinyl NWP Engineering Decals Learn More -
IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines
$92.99IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-8 JWT CAMSHAFT SET
$1,386.33High HP, Racing cam set. 272 DEG/.473 Must use JWT Valve Springs Learn More -
VQ35 C-9 JWT CAMSHAFT SET
$1,386.33Ultimate Race Cam for your VQ35 / 283.5 DEG/.516" MUST USE WITH JWT SPRING/SHIM SET Learn More -
VQ35 C-10 JWT CAMSHAFT SET
$1,386.33The biggest cam ever produced by JWT. MUST USE WITH JWT SPRING/SHIM, DOES NOT FIT REV-UP MOTOR (REQUIRES HEAD CLEARANCING) Learn More -
JWT LIGHTWEIGHT FLYWHEEL MAXIMA/ALTIMA VQ35
$491.27V6 Altima / Maxima aluminum flywheel weighing in at 15 lbs. Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
B15 to VQ35 Throttle Body Adapter
Regular Price: $159.00
Special Price $129.99
6061 CNC Aluminum Adapter Plate to bolt on a 02-06 VQ35 Throttle Body on to a B15 Plenum Learn More -
Nissan Maxima / I35 / Murano 3.5L VQ35 Lightweight Race Pulley
Regular Price: $134.99
Special Price $92.99
Out of stock
IN STOCK NOW! 2JR introduces our lightweight race pulley for the VQ35 Maxima and Infiniti I35, 01-04 years. Based on a far better design than the OBX pulley with a 75% weight savings over OEM, this is a must have mod for your VQ. Offered ONLY in anodized BLACK, with 2JR Logo Fits 2001-2004 3.5L, FWD ONLY Requires: Gates belt part number is K060408 for Alternator/AC Gates belt part number is K040300 for Power Steering Gain 9whp / 12wtq! Learn More -
2JR STAGE IV Clutch Kit (550whp) - QR25DE and VQ35DE
Regular Price: $454.99
Special Price $399.99
2JRacing has partnered with the best American Made clutch manufacturer that specializes in sport compact clutches from street driven to full race applications. These clutches are proudly used in some of the fastest sport compact race cars in the county, including a number of the most recognized industry icon vehicles. These clutches represent the finest materials, workmanship and the best customer service in the industry. Offering the higher clamping force, stronger disk designs and uncompromised satisfaction, all at the most competitive pricing. Stage IV Drag / Road Course Series No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, pedal feels like STOCK! 250% Increase in clamping force Ceramic Six Rivet Carriage is good for ease of gear transition with higher horsepower. Withstands heavy launches and continuous track duty without overheating. Can be used on the street as well. Spec - 550whp / 500ft/tq Only available in 9.5" Disk for VQ35 and QR25 (with 2JR or JWT Flywheel). This clutch will not work on QR25DE with STOCK or FIDANZA Flywheels!! Can be ordered as a combo with the 2JR Flywheel (fits only QR25DE). ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Learn More -
B15 OEM or Full Race Axle Set QR25
Regular Price: $999.99
Special Price $589.00
Sold as a pair. You have the option of getting OEM axles - or Race axles. OEMs are good for up to 500whp, while the race axles are good to over 600whp. The race axles have 38mm upgraded center shafts, forged chromoly cages, increased ball/cup design, high temp race CV grease, Neoprene road race boots and vented center sections for handling speeds in excess of 150mph for continued use. For RACE axles - *Customer Must Supply OEM Axles* **Must be factory axles with 100AC stamped into the inner CV housings Learn More -
02-06 B15 Sentra VQ Engine Mount Kit
Regular Price: $599.99
Special Price $349.99
Mount a FWD VQ35DE in your Sentra correctly with 2JR's billet mount kit. Includes front and rear solid delrin mounts, billet brackets for the front lower mount, axle carrier, axle spacer and passenger side mount. Take the guess work out of the install and do it right! Also available are full VQ install wiring harnesses, headers, UpRev and other swap parts. Learn More -
JWT VQ35 (Maxima) / QR25 Friction Disk - For JWT Flywheels
Regular Price: $96.99
Special Price $89.99
Replacement flywheel inserts make replacing your worn or damaged flywheel friction surface a breeze. These 1050 high carbon steel inserts are blanchard ground to ensure a perfect clutch disc mating surface. They are designed specifically for use with JWT flywheels. Learn More -
2JR Rigid Disk Stage III Clutch Kit (400whp) - QR25DE and VQ35DE
Regular Price: $489.99
Special Price $399.99
Rigid Stage III Clutch Sets are here! These are stronger, lighter and can handle the higher TQ loads. Same pad material as the Stage 3 clutch sets but without the sprung cages. Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. No other clutch is built this well at this price and comes with a very easy clutch pedal. Not stiff or harsh, pedal feels like STOCK! 210% Increase in clamping force Spec - 425whp / 425ft/tq Applications 2002-2006 - Sentra 2.5L 2002-2006 - Atlimta 2.5L 2002-2006 - Maxima VQ35 (flywheel does not fit - only the clutch set) 2002-2006 - Rogue 2.5L Does not fit 2007+ Models (Gen2 QR) ALL CLUTCH KITS COMES WITH THROW OUT BEARING AND ALIGNMENT TOOL Options Include: 1. ARP Flywheel Bolts (only fits 2JR Forged Flywheel) 2. OEM Throwout Bearing Upgrade 3. 2JR Stainless Clutch Line 4. Motul Transmission Fluid Set (3 Bottles) This is the best fluid we've tested in the QR. Not stiff when cold, shifts smooth in all temp ranges. Protect your trans with the best 5. Forged Steel 14lb Flywheel Learn More -
BLOX Racing 2003-2005 Nissan 350Z / Infiniti G35 - Thermal Shield
Regular Price: $112.00
Special Price $92.00
The BLOX Racing intake manifold spacer for the Nissan VQ35 is specifically designed to help increase the manifold’s capacity and lower the intake air temperature. As a result of the improved efficiency, power and throttle response is also increased. The manifold spacer is made out of thermal polymer, which provides dramatic heat insulating properties, and easily installs between the factory’s intake manifold. The BLOX Racing plenum spacer is available in three different thicknesses, in order to provide the best fitment and power potential. *Plenum Thicknesses* * 1/2" * 5/16" * 5/8" *Applications* * 2002-2008 Nissan 350Z coupe (non RevUp engine) * 2003-2009 Nissan 350Z roadster (non RevUp engine) * 2003-2006 Infinit G35 sedan (non RevUp engine) * 2003-2007 Infinit G35 coupe (non RevUp) *Note:* Some upper strut tower bars may not have enough clearance after installation. *MADE IN THE USA* Learn More -
BLOX Racing 03-05 Nissan 350Z / Infiniti G35 - 1/2 Thermal Shield
Regular Price: $112.00
Special Price $92.00
The BLOX Racing intake manifold spacer for the Nissan VQ35 is specifically designed to help increase the manifold’s capacity and lower the intake air temperature. As a result of the improved efficiency, power and throttle response is also increased. The manifold spacer is made out of thermal polymer, which provides dramatic heat insulating properties, and easily installs between the factory’s intake manifold. The BLOX Racing plenum spacer is available in three different thicknesses, in order to provide the best fitment and power potential. *Plenum Thicknesses* * 1/2" * 5/16" * 5/8" *Applications* * 2002-2008 Nissan 350Z coupe (non RevUp engine) * 2003-2009 Nissan 350Z roadster (non RevUp engine) * 2003-2006 Infinit G35 sedan (non RevUp engine) * 2003-2007 Infinit G35 coupe (non RevUp) *Note:* Some upper strut tower bars may not have enough clearance after installation. *MADE IN THE USA* Learn More
