Search results for: '4x114 & 4x100'

HKS Universal SSQV4 BOV

Regular Price: $295.98

Special Price $279.78

HKS Universal SSQV4 BOV HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. This Super SQV maximizes the charge-response that repeats pressure-charging and pressurized air relief by throttle on and off and supports new generations of turbocharged vehicles. Factory recirculation valve sound cannot be noticed, but once HKS Super SQV IV is installed, its unique & sharp high frequency sound demonstrates its existence. Super SQV IV significantly increases its presence and improve the engine compartment appearance. To match with the appearance created by HKS Intercooler Piping Kit, the buff-polished casting pipe is included. By both the sound and appearance, Super SQVIV increases the fun to drive. Learn More

K&N High-Flow Air Filter - GR Corolla

Regular Price: $54.98

Special Price $51.97

K&N High-Flow Air Filter - GR Corolla Direct fitment in the GR Corolla OEM Air Box. FEATURES * High Air Flow with Excellent Filtration * Designed to Increase Horsepower and Acceleration * Washable and Reusable * Will NOT Void Vehicle Warranty * Lasts up to 50,000 miles before cleaning is required depending on driving conditions * K&N Million Mile Limited Warranty * Emissions Legal in all 50 US States. * Economical, a K&N Air Filter Will Last the Life of Your Automobile * Works with Original Equipment Manufacturer Vehicle Electronics * Easy High Performance Add-on * Environmentally Friendly Learn More

Liquid Moly 0W-16 5L / K&N Filter / Drain Gasket

Regular Price: $67.18

Special Price $59.98

Liquid Moly 0W-16 5L / K&N Filter / Gasket Oil Change Bundle for the Corolla 2.0L (Engine M20A-FKS) Includes: - Liquid Moly 0W-16 5L - KN Gold Filter - OEM Toyota Drain Plug Gasket Notes: E210 2.0L Drain and refill with oil filter change: 4.9 liters 30 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Learn More

Tein 2019+ Toyota Corolla Flex Z Coilovers (3" Drop)

Regular Price: $950.00

Special Price $899.78

Tein 2019+ Toyota Corolla Flex Z Coilovers fits hatch and sedan Up to a 3" Drop 6K Front Springs / 5.2K Rear Springs FLEX Z inherits all the features and quality of STREET FLEX but the adoption of new platform allows its price to be set at amazingly low range. FLEX Z, of course, maintains the long-favored "Made in Yokohama" quality. Ride height adjustable shock absorber, fully loaded with TEIN's comprehensive technology, is now more affordable prices than ever. https://www.tein.com/products/flex_z.html Specifications Full-Length Ride Height Adjustment Feature - Ride Height Adjustment with Little or No Change in Ride Quality Twin-Tube Structure - For Low Resiliency & Securing Sufficient Stroke Damping Force Adjustment System - 16-level Linear Damping Force Adjustment System Complete Kit with Upper Mount - Exclusively Designed Upper Mounts are Included (Except Some Models) Complete Suspension Kit of 4 Shock Absorbers & 4 Springs Learn More

Bilstein B14 (PSS) FWD Juke Front & Rear Performance Suspension Kit (2.0 Drop)

Regular Price: $1,049.98

Special Price $998.78

Bilstein B14 (PSS) FWD Juke Front & Rear Performance Suspension Kit (2.0 Drop) Bilstein’s B14 PSS coil over kits feature threaded sections that allow you to raise or lower your vehicle within a 50mm range, giving a wide range of suspension tuning flexibility. Developed and fine-tuned to withstand rigorous track conditions, the B14 PSS coil over kits come with a set of precisely-calibrated springs to optimize ride and handling. Bilstein has set the standard in shock absorber and suspension components since they invented the first monotube gas-pressure shock in the 1950s. Developed to withstand tough track conditions Will lower ride height from 30-50mm A 50mm range of height adjustment Made with Bilstein’s renowned gas-pressurized monotube design Spring rates are carefully selected to match damper performance Coated with Triple-C-Technology for long-lasting corrosion protection Learn More

Bully Dog 89-03 Cat Stage 1 3406B/3406E / C15/C16 Billet Wheel Turbo

Regular Price: $1,850.77

Special Price $1,829.98

Bully Dog 89-03 Cat Stage 1 3406B/3406E / C15/C16 Billet Wheel Turbo #56700 The Big Rig performance experts at Bully Dog Big Rig have done it again! For 1989-2003 CAT 3406B, 3406C, 3406E, C15 and C16 truck owners, the all-new Lighter Aluminum Billet Wheel Turbo delivers performance, reliability and fuel economy. Bully Dog Big Rig’s Stage 1 Billet Wheel Turbo Charger is an OEM replacement for trucks making from 400 to 625 horsepower. Engineered & Manufactured with Bully Dog’s renowned quality, this turbo features improved torque and fuel economy as well as lower EGT’s(Exhaust Gas Temperatures). With a quicker spool up and better craftsmanship than OEM turbos — the Stage 1 turbo is the perfect OEM replacement and is the best turbo charger for class 8 vehicles on the road today. The only difference between Bully Dog’s Stage 1 and Stage 2 CAT Turbos is the exhaust housing. The stage 1 housing is a 1.32 AR and the stage 2 is a 1.45 AR. The larger housing on the stage 2 allows the same volume of air but it will be slower. It will run just as well as the stage 1 but with lower boost. If you have a higher horsepower rig, the larger housing of the Stage 2 will help you prevent over-spinning the turbo. Key Features Reduced Turbo Lag for Better Throttle Response Black Pearl Finish on the Cold Side Adds 30 to 40 Horsepower Dual Piston Ring Seals High Quality Copper Journal Bearings Upgraded Diffuser Plates Faster Spinning Turbo Increases Horsepower & Torque Better Airflow Reduces Engine Temps & Improves Reliability Increased Fuel Economy Triple Balanced – up to 180,000 RPM Bolts Up To Factory Locations No Core Charge 1.32 AR Exhaust Housing 78mm Billet Aluminum Compressor Wheel Unlimited Mileage 2 Year Manufacturer’s Warranty Learn More

MagnaFlow 02-06 Nisssan Altima/Sentra V4 2.5L Manifold Direct Fit Catalytic Converter

Regular Price: $1,102.98

Special Price $1,058.96

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50805. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2006 Nissan Altima and 2002-2006 Nissan Sentra, this direct-fit catalytic converter also interchanges with OE parts 14002-9J310, 14002-9J30B, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems. Learn More

K&N +19 Corolla 2.0L Typhoon Short Ram Intake

Regular Price: $349.98

Special Price $319.78

K&N +19 Corolla 2.0L Typhoon Short Ram Intake Fits both the sedan and hatchback Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Learn More

2019+ Tein Street Basis Z - Corolla Hatchback and Sedan

Regular Price: $640.00

Special Price $608.78

2019+ Tein Street Basis Z - Corolla Hatchback and Sedan Fitment Information Lowering Range: 1.0" to 3.0" Front and 1.0" to 3.0" Rear Street use superior quality made affordable. Thread-type Ride Height Adjustment. The ride height can be adjusted by moving the lower spring seat up or down. Twin-Tube System. Compared to the regular mono-tube system, twin-tube attains longer stroke with a smaller repulsive force, resulting in high ride comfort. Use OE Mounts. STREET ADVANCE Z and STREET BASIS Z use the vehicle's original upper mounts (not included in our product kit). Specs & Features Spring Rates: 280 lb Front and 263 lb Rear Fixed Damper Settings (non adjustable) Includes a full set of 4 12 Month Warranty Genuine TEIN - Made in Japan Learn More

B16 Sentra Goodridge Brake Lines (07-12)

Regular Price: $198.77

Special Price $139.98

G-STOP SS Braided Brake Line Kit B16 Sentra Goodridge Brake Lines (07-12) 2007-2012 Fits all B16 Sentras with front and rear disk brakes, including SpecV models. Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow. *Features* * Performance Enhancement & Safety Improvement * Eliminates Sponginess Under Braking * Increases Braking Efficiency * Abrasion and Corossion Resistent Learn More

RS-R 2019+ Toyota Corolla Hatchback/Sedan Down Springs (-1.2 Drop)

Regular Price: $309.99

Special Price $272.78

Fitment Information RS-R 2019+ Toyota Corolla Hatchback/Sedan Down Springs (-1.2 Drop) Fits both the sedan and hatchback Specs & Features Down: Front -1.0 inches to -1.2 inches Rear -0.8 inches to -1.0 inches Spring Rates: Front 2.90kg/mm Rear 3.89kg/mm True Japanese heritage from the JDM market Performance spring with comfort in mind Includes all 4 springs Designed to work with stock shocks True Japanese lowering springs. RS-R is one of the top aftermarket spring manufactures in Japan and is proud to bring their technology to the US. These authentic JDM lowering springs provide you with both comfort and performance while giving you the lowered stance and much improved handling characteristics that you look for in a lowering spring. RS-R takes careful consideration of the vehicle these springs were designed for to ensure the factory suspension geometry, shock dampening, spring rate and right height levels are designed for your specific vehicle to give you the best performance and control possible. Learn More

RS-R 2019+ Toyota Corolla Hatchback/Sedan Super Down Springs (-2.0 Drop)

1 Review(s) | Add Your Review

Regular Price: $339.00

Special Price $278.98

Fitment Information RS-R 2019+ Toyota Corolla Hatchback/Sedan Super Down Springs (-2.0 Drop) Fits Both Sedan and Hatchback Specs & Features Super Down: Front -1.8 inches to -2 inches Rear -1.8 inches to -2 inches Spring Rates: Front 2.63kg/mm Rear 4.29kg/mm True Japanese heritage from the JDM market Performance spring with comfort in mind Includes all 4 springs Designed to work with stock shocks True Japanese lowering springs. RS-R is one of the top aftermarket spring manufactures in Japan and is proud to bring their technology to the US. These authentic JDM lowering springs provide you with both comfort and performance while giving you the lowered stance and much improved handling characteristics that you look for in a lowering spring. RS-R takes careful consideration of the vehicle these springs were designed for to ensure the factory suspension geometry, shock dampening, spring rate and right height levels are designed for your specific vehicle to give you the best performance and control possible. Learn More

CXRacing Coilovers for B15 Sentra

1 Review(s) | Add Your Review

Regular Price: $849.78

Special Price $729.78

CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More

Juke FWD Downpipe (2011-2014 & RS)

Regular Price: $479.00

Special Price $398.78

Juke FWD Downpipe (2011-2014 & RS) 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. Now includes billet aluminum bracket to limit exhaust flex under load. A defouler is not required with this downpipe. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Up to 305wtq - stock turbo +330wtq - Mamba 21TK +440 whp - Garrett G Series Turbo Learn More

H&R 07-12 Nissan Altima Sport Spring

Regular Price: $439.78

Special Price $329.78

Fitment Information Nissan Altima Coupe/Sedan 4 Cyl/6 Cyl (2007, 2008, 2009, 2010, 2011, 2012 ) Specs & Features Coupe: Lowers 1.2" Front and 1.2" Rear Sedan: Lowers 1.5" Front and 1.2" Rear Includes all lowering springs Works with factory shocks or aftermarket shocks that fit stock springs. H&R Sport Springs offer superb ride quality and are H&R's number one selling product. These lowering springs offer some of the best ride characteristics of any lowering spring and offer enhanced handling while giving your car just the right amount of lowering to close the fender gap. H&R Sport lowering springs lower the vehicle center of gravity and reduce body roll for incredible handling improvements. H&R Sport springs are progressive rate and work fantastic with aftermarket, factory or performance shocks. On older vehicles we do recommend to upgrade the shocks at the same time. Includes all 4 springs for a complete setup. Learn More

QR25 Nismo Motul Oil Change Kit (All years)

Regular Price: $139.78

Special Price $109.76

2JR Nismo Oil Change Kit Includes 5 QTS of Motul Nismo 5w40 / K&N Gold Large Oil Filter and OEM Seal for Drain Plug NISSAN MOTORSPORTS INTERNATIONAL - High performance lubricant specially developed for high output, high torque engines. NISMO COMPETITION OIL is the best protection you can get for your engine. This oil grew up with that engine and its development focused on high performance motor sports use: tested in the 2008 Tokachi 24 Hours, run in the NISSAN GT-R NISMO RC and NISSAN GT-R Club Track Edition, and raced in the 24 Hours Nurburgring. The final result of development testing was the choice of a 5W40 over a 0W40 viscosity grade. 2193E (5W40) is a select, synthetic multi-grade oil which mixes polyolesters, known for their superlative viscosity at low temperatures, into the base oil. Formulated for low friction but maintaining generous filming properties, this NISMO-MOTUL motor oil will minimize engine wear to the bearings where pressure is at its highest. Learn More

Clutch Masters Nissan SR Sentra Turbo FX400 Sprung 6-Puck Ceramic Clutch Kit

Regular Price: $603.75

Special Price $523.75

Clutch Masters Nissan SR Sentra Turbo 6-Spd 1.6T FX400 HD PP Sprung 6-Puck Ceramic Clutch Kit FX400 Clutch Kit; Heavy Duty Pressure Plate; 6-Puck Ceramic Sprung Disc; Change Over Kit w/o Flywheel; Will Only Work w/ CM Flywheel Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More

2015+ Nissan Juke Blow Off Valve Upgrade for GenII Motors ONLY

Regular Price: $168.77

Special Price $139.78

2015+ Nissan Juke Blow Off Valve Upgrade for GenII Motors ONLY Will not fit Nismo RS models. Only 2015 and up Juke Models except Nismo RS. THE SIMPLE & ESSENTIAL MOD FOR 30% QUICKER BOOST By retaining the factory ECU control and recirculating the vented air, the GFB BOV is a purely performance oriented product that offers the following benefits: Sharper throttle response Faster boost recovery on gearshift Solves boost leaking issues Built to last UTILIZING PROVEN TMS TECHNOLOGY TO ENSURE DEPENDABLE BOOST HOLDING AND OPTIMUM THROTTLE RESPONSE The T9362 is a fully recirculating direct factory replacement for the pneumatic diaphragm type BPV (Bypass Valve) used on Renault Cleo RS – when you want the performance WITHOUT the noise! Using GFB’s TMS technology it can help return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears Learn More

Nissan B17 Sentra SR/Nismo Blow Off Valve Upgrade

5 Review(s) | Add Your Review

Regular Price: $168.77

Special Price $142.54

Fits the GenII MR16DDT Engines - B17 Sentra Turbo Models THE SIMPLE & ESSENTIAL MOD FOR 30% QUICKER BOOST By retaining the factory ECU control and recirculating the vented air, the GFB BOV is a purely performance oriented product that offers the following benefits: Sharper throttle response Faster boost recovery on gearshift Solves boost leaking issues Built to last UTILIZING PROVEN TMS TECHNOLOGY TO ENSURE DEPENDABLE BOOST HOLDING AND OPTIMUM THROTTLE RESPONSE. The T9362 is a fully recirculating direct factory replacement for the pneumatic diaphragm type BPV (Bypass Valve) used on Renault Cleo RS – when you want the performance WITHOUT the noise! Using GFB’s TMS technology it can help return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears Learn More

Clutch Masters Nissan Juke FX400 Sprung 6-Puck Ceramic Clutch Kit

Regular Price: $603.75

Special Price $523.78

Clutch Masters Nissan Juke 6-Spd 1.6T FX400 HD PP Sprung 6-Puck Ceramic Clutch Kit FX400 Clutch Kit; Heavy Duty Pressure Plate; 6-Puck Ceramic Sprung Disc; Change Over Kit w/o Flywheel; Will Only Work w/ CM Flywheel Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More

Search results for '4x114 & 4x100'