Search results for 'arm'

Items 21 to 30 of 30 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
  1. B15 and B16 QR25 Mishimoto  Racing Thermostat

    B15 and B16 QR25 Mishimoto Racing Thermostat

    Regular Price: $97.50

    Special Price $85.95

    Mishimoto Racing Thermostat: Mishimoto Racing Thermostats will promote greater cooling efficiency throughout your engine. The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats, also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.

    177 deg vesus OEM thermostats are 205deg and 180deg

    Learn More
  2. 2JR B15 255LPH Direct Fit Fuel Pump (2002-2006) QG & QR

    2JR B15 255LPH Direct Fit Fuel Pump (2002-2006) QG & QR

    Regular Price: $139.99

    Special Price $79.99

    2JR uses the exact same internals as the OEM Bosch Pump but we upgrade the motor armature with less turns, thicker wire, for 40% more rpm, which means more flow. Our pump is a direct drop in to our B15 Nissan canisters. No cutting or trimming is required.! All Walboro and other aftermarket fuel pumps are too long which makes for a difficult install. Direct fitment in your B15 - fits both QG and QR motors (1.8L and 2.5L) 2002-2006 ONLY Excellent Stock Replacement Pump Good for Street N/A and Turbo Builds under 350whp Compatible with E85 Also available is 340LPR pump for turbo applications Learn More
  3. B15 Handling Pack - RCK and UPGRADED Bump Steer Kit

    B15 Handling Pack - RCK and UPGRADED Bump Steer Kit

    Regular Price: $329.99

    Special Price $199.98

    NOTE! YOU MUST TRIM THE FRONT OF THE LCA TO CLEAR THE ROTOR WHEN USING THE RCK with Brembo OEM Brakes. 1mm-2mm of CLEARANCE REQUIRED! Our kit is designed to raise the front roll-center geometry by using specially engineered ball-joints in combination with our 2JR Bump Steer Kit Tie Rod Ends while still maintaining original steering geometry. Sentra McPherson front roll geometry gets worse and worse the lower you go with your B15. Coilovers, sway bars and our LCAs help but dont fix the problem. Our testing proved that raising the front roll-center resulted in a substantial increase to front roll resistance and a huge reduction in suspension compression of the outside front wheel during cornering (less roll). This improves weight distribution & maintains a better camber angle which ultimately improves front grip. The overall outcome is significantly reduced understeer through reduced front wheel compression as well as improved steering precision & vehicle stability. The 2JR RCK MUST be used with our UPGRADED BUMP STEER KIT. So the steering tie rod angle matches the lower control arm angle. Easily accomplished with our spacers included in the Bump Steer Kit. No more twitchy, hyper-active steering. This is for the street, drag, autox and track. For cars that are lowered more than 1/2" over stock. Learn More
  4. SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro

    SuperPro Rear Trailing Arm Bushings - Street/Track 95 Duro

    Regular Price: $159.00

    Special Price $110.99

    After testing 1 set with excellent results, we have asked SuperPro to make a select set of only 10 sets of axle pivot bushings in 95K durometer for us. This is nearly 300% stronger than their normal Super Pro hardness and have grooved inner races for quiet operation to hold grease. And you reuse your original shell so install is fairly easy. Fits P10, P11, B15, N15, N16 Improve rear balance, turn in and eliminate understeer. Build for the street for no noise and track ready for full stiffness. LIMITED TO JUST 10 SETS. Learn More
  5. 2JR SuperPro Front LCA Bushing Kit ONLY

    2JR SuperPro Front LCA Bushing Kit ONLY

    Regular Price: $314.99

    Special Price $251.99

    2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. In stock and shipping daily. The kit includes the front and rear bushings ONLY. We also offer these bushings installed in new LCAs Learn More
  6. 2JR Lower Control Arms with SuperPro Bushings

    2JR Lower Control Arms with SuperPro Bushings

    Regular Price: $501.99

    Special Price $439.98

    STAGE I - Custom for 2JR, 95 Duro SuperPro Bushing set - already installed in new LCAs with NEW 555 Japanese (JDM) Ball Joints. STAGE II - You can also add the 2JR Full Race Tall Ball Joints (Roll Center Kit RCK) See options below. The RCK and Bump Steer Kit must be used together as they MUST work in tandem to align the suspension correctly. If the RCK/Bump option isnt check, the LCAs will ship with 555 JDM ball joints. Includes both Left and Right Arms, all new arms, ball joints and SuperPro double offset caster bushings. SuperPro: 2JR introduces a special line of Front Lower Control Arm bushings for your B15 (all models). We contracted SuperPro to make the front LCA bushings in its highest durometer available at 95K for the front bushings. This is a 200% improvement over stock and 140% stronger than ES bushings and standard SuperPro bushings. For the rear section of the LCA we added double caster offset bushings set in a steel sleeve with 95K duro interference bushing to keep the Rear LCA mount solid and prevent any flex under load. Increased caster provides straight line stability. These are the best street/strip LCA bushings we've ever tested. Allow 7-10 days for production of the LCAs. These are made to order Learn More
  7. 2JR 25mm Fully Adjustable Rear Sway Bar (B15)

    2JR 25mm Fully Adjustable Rear Sway Bar (B15)

    Regular Price: $349.99

    Special Price $299.98

    2JR 25mm Fully Adjustable Rear Sway Bar (B15)

    The best rear sway bar ever created for the B15 chassis (fits all models) is now available through 2JR. Massive 25mm fully adjustable rear bar, installs in under 45m with no drilling required. Improve lateral stiffness and cornering. 200% more torsional rigidity than the Eibach rear sway bar. For the best street and track performance, this is the bar you want. Only available in a limited run.

    Now Combo Options with either SuperPro Rear Bushings or Full SuperPro Rear Bushing Kit that includes the Rear Trailing Arm bushings and all the bushing in the Scott Russell Link/ - inc the dog bone Learn More
  8. 15mm Race Spec 2JR Traction Spacer (ALK) B15

    15mm Race Spec 2JR Traction Spacer (ALK) B15

    Regular Price: $139.99

    Special Price $69.98

    The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, take control of your car. Does what our 10mm spacer does, only better!! The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. Includes hardened pins and 6 50mm bolts. Learn More
  9. 10mm Street Traction Spacer (ALK) B15

    10mm Street Traction Spacer (ALK) B15

    Regular Price: $95.99

    Special Price $49.98

    The secret is out..... Found on the fastest B15's and spec V's in the world. Suspension geometry is a compromise from the factory, don't settle, and take control of your car. The more technical description of this part is; it lowers and decreases the distance of the instant center of the suspension from a Side View Swing Arm view. This alters anti-lift under acceleration, and anti dive under braking. This results in a more stable feel in braking, less weight transfer and front lift under straight line acceleration, and tremendous increases in grip while on the throttle in a corner. NOW includes hardened pins and 6 50mm bolts. Learn More
  10. IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines

    IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines

    $92.99

    IN-CHASSIS VALVE SPRING COMPRESSOR fits most VQ, KA, QR, & VK engines Learn More

Items 21 to 30 of 30 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction