Search results for '05 Nissan altima ser'
-
Sentra 02-03 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback 3"
Regular Price: $899.00
Special Price $729.98
*Limited* Carbon Fiber V2 High Performance Twin Tip Catback The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 3" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 3" stainless midpipe for the ultimate in performance, power and looks. Materials: Vibrant Rear Muffler w/ 2JR Carbon Resonated Tips Magnaflow Center Resonator Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $299.99
Special Price $149.00
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
Injen 2011-2014 Nissan Juke Short Ram Cold Air Intake (Red/Black/Polished)
Regular Price: $301.98
Special Price $259.78
Injen 2011-2014 Nissan Juke Short Ram Cold Air Intake (Red/Black/Polished) Direct fit for: 2011-2014 Nissan Juke L4-1.6L Turbo All Years for Nismo RS Models (2011-2017) The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Available in Red, Black or Polished Learn More -
QR25 Upper Oil Pan - Turbo Drain
Regular Price: $299.99
Special Price $279.89
QR25 Upper Oil Pan - Turbo Drain We now offer a new OEM upper oil pan for the QR25 with a drilled, tapped and tig welded 10an oil drain, Inc a block off cap if you're not turbo yet. No more leaks. Approx 1-2 weeks from date order is placed. Subject to parts availability from Nissan. Pan's do not include baffle plate. They are as shown in the photo. You can also send in your pan for this service. The cost is $135 and includes the fittings. Shipping costs paid when you check out will be used to return your pan. Ship to the address below with your order receipt in the box. OEM B15 Pan: Nissan 11110-3Z000 (2002-2006) OEM B16 Pan: Nissan 11110-ET80A (2007-2012) < new OEM pan is +300 from Nissan Ship to: 2JRacing 1685 Redi Rd Cumming GA 30040 Learn More -
Hard Race Exhaust Hangers (Set of 4)
Regular Price: $29.87
Special Price $22.99
Hard Race Exhaust Hangers (Set of 4) Fits Nissan / Toyota / Subaru / Ford Dimensions: Length: 2-7/8, Width: 1-7/8, Height: 13/16. 12mm Holes * use Brake Cleaner to aid in installation (acts as a quick drying lubricant) High Durometer EPDM material with better abrasion resistance, high-temperature resistance and strength 1. Strong Lateral (side load) control 2. Reduce the height and contact surface b/w exhaust and chassis 3. Dampens vibrational interference b/w the hanger and exhaust Learn More -
Nissan Juke Oil Feed Line - Turbo
Regular Price: $89.95
Special Price $68.39
Juke Oil Feed Line - (2011-2014) and all RS models (any year) Replacement Oil Feed Line for your Gen 1 Nissan Juke. Its very common for this line to become clogged over time and damage the turbo. Don't take a chance and replace it with a new line, hardware and copper seals. Install time is approx 30m and best performed during an oil change. It is also recommended to add a catch can to capture and filter the oil blow by before it enters back into your engine. Learn More -
SR/Nismo Stage I Clutch and Forged Flywheel - OEM Stock Upgrade (325hp)
Regular Price: $679.00
Special Price $629.78
Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit SR / Nismo Sentra - All Years (MR16DDT), only Turbo Models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325hp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. Optional LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Learn More -
2JR UpRev Turbo/Boosted ROM Files (Non-Juke)
Regular Price: $399.98
Special Price $349.98
2JR UpRev Turbo/Boosted ROM Files (not Nissan Juke) If you already have a USB Interface cable and license, and wish to have us tune your vehicle, this is the first step. After you place the order for the E-Tune, you'll need to email info@2j-racing.com and provide your order number (this will be supplied to you once checkout is completed). Our E-Tuner will look at the information you provided and start the process with you. Your E-Tune will be created using datalogs that you provide and the E-Tuner will be available to help you along the way. There will be a maximum of 3 updates to the initial tune before it's considered completed. Please allow 2-3 days for a response from the E-Tuner, he provides tunes in the order they were received. You have 1 year from the date of purchase to redeem your tune. E-Tunes are non-transferable and non-refundable if you made contact with our E-Tuner and received any files from him. Learn More -
Clutch Masters Nissan Juke 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters Nissan Juke 1.6T 6 Speed FX250 Clutch Kit The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters 11-14 Nissan Juke 1.6L FX250 Clutch Kit Organic Fiber Tough Sprung Disc The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
B15 to B16 Throttle Body Spacer - Star
Regular Price: $99.49
Special Price $79.89
B15 to B16 Throttle Body Spacer - Star Allows you to mount a B15 Throttle Body on a Gen2 Composite OEM Plenum (B16 SpecV / Altima / Rogue). Includes the Stainless Hardware. Learn More -
Hitachi MAF for B17 Sentra SR/Nismo / Juke
Regular Price: $198.77
Special Price $169.78
Hitachi MAF for B17 Sentra SR/Nismo / Juke Hitachi direct replacement MAF Sensor for the B17 SR/Nismo (Turbo) and Nissan Juke. The OEM MAF is prone to failure/issues- upgrade to the Hitachi MAF for more consistent performance. Fits: Juke 2011-2014 (all models) Juke 2015-2018 (all models) Juke Nismo RS (all years) Sentra SR / Nismo B17 - all models Engine: MR16DDT Learn More -
Cusco Sway Bar 16mm Rear Juke - 2WD ONLY
Regular Price: $334.00
Special Price $298.78
Cusco Sway Bar 16mm Rear Juke - 2WD ONLY (FWD) Vehicle Fitment Nissan Juke - All Years Vehicle Notes 2WD - Turbo model Car Position Rear Product Notes 16mm Rear Sway Bar - Add-on Type, Bolt-on kit Solid Steel BENEFITS Increased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component. Learn More -
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More -
QR25 Fully Counterweighted and Knife Edged Crankshaft
Regular Price: $1,260.98
Special Price $499.00
QR25 Fully Counterweighted and Knife Edged Crankshaft GEN 1 - QR25DE Will need to be turned/polished (journals)Normally reserved for racing applications, a knife edged crankshaft can help the engine produce more horsepower. Removing this material and bringing it to a sharp edge does a couple of things. First, knife edging can often remove pounds of weight. Less weight equates to a rotating assembly that spins with less resistance, and this in itself is responsible for some gains in horsepower.
The counterweights on a Stock Nissan crank is flat on the ends. As the crankshaft rotates, these counterweights come into direct contact with the engine's oil. This contact creates friction and splashes oil all over the bottom end of the engine. A knifed edged crankshaft actually glides through the oil much easier and encounters far less friction. Anytime friction can be reduced in an engine's rotating assembly or valvetrain, additional horsepower gains are realized. Excellent for turbo or NA applications.
IN STOCK NOW!
Learn More -
PREORDER B15 QR Stainless Flex Resonated Midpipe 2.5"
Regular Price: $299.98
Special Price $239.78
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 2.5". Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
Juke "Sprint Series" Front Mount Intercooler Kit
Regular Price: $949.99
Special Price $729.98
Juke "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Can be used with Stock OEM Nissan Intercooler piping or Injen to 2JR hardpiping kit. Features and Benefits: - Direct fit for the 2011-2015 Nissan Jukes (CVT, 6MT, FWD and AWD) - all RS models all years - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Juke FWD Downpipe (2011-2014 & RS)
Regular Price: $479.00
Special Price $398.78
Juke FWD Downpipe (2011-2014 & RS) 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. Now includes billet aluminum bracket to limit exhaust flex under load. A defouler is not required with this downpipe. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Up to 305wtq - stock turbo +330wtq - Mamba 21TK +440 whp - Garrett G Series Turbo Learn More -
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit
Regular Price: $899.00
Special Price $679.98
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! NOTE: Send us a message on FB or IG for the Install Video! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More