Search results for '2011 NISSAN SENTRA SER SPEC V'
-
B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $299.99
Special Price $149.00
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
Injen 2011-2014 Nissan Juke Short Ram Cold Air Intake (Red/Black/Polished)
Regular Price: $301.98
Special Price $259.78
Injen 2011-2014 Nissan Juke Short Ram Cold Air Intake (Red/Black/Polished) Direct fit for: 2011-2014 Nissan Juke L4-1.6L Turbo All Years for Nismo RS Models (2011-2017) The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Available in Red, Black or Polished Learn More -
Nissan Juke Oil Feed Line - Turbo
Regular Price: $89.95
Special Price $68.39
Juke Oil Feed Line - (2011-2014) and all RS models (any year) Replacement Oil Feed Line for your Gen 1 Nissan Juke. Its very common for this line to become clogged over time and damage the turbo. Don't take a chance and replace it with a new line, hardware and copper seals. Install time is approx 30m and best performed during an oil change. It is also recommended to add a catch can to capture and filter the oil blow by before it enters back into your engine. Learn More -
SR/Nismo Stage I Clutch and Forged Flywheel - OEM Stock Upgrade (325hp)
Regular Price: $679.00
Special Price $629.78
Stage I Performance Carbon Ceramic Clutch and Forged Flywheel Kit SR / Nismo Sentra - All Years (MR16DDT), only Turbo Models Includes Stage 1 Clutch, Flywheel and CSC (concentric slave unit) 34% Increase in clamping force Carbon and ceramic material with a performance pressure plate provides the best streetable clutch on the market today for your Nissan. This assembly is suited for bolt on upgrades up to 325hp. It provides extended life, easy engagement and great drivability. Not stiff or harsh, feels like stock. Optional LIQUI MOLY 3L Fully Synthetic Hypoid Gear Oil (GL4/5) 75W90 Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX250 Clutch Kit
Regular Price: $577.50
Special Price $498.78
Clutch Masters 11-14 Nissan Juke 1.6L FX250 Clutch Kit Organic Fiber Tough Sprung Disc The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for *Features* * High performance street system * Holding capacity 110% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Hitachi MAF for 04 - 12 Sentra / 350Z / Altima
Regular Price: $127.98
Special Price $96.77
Hitachi MAF for 04 - 12 Sentra / 350Z / Altima Hitachi direct replacement MAF Sensor for the 2004 to 2012 Nissan Sentra / 350Z / Altima. The OEM MAF is prone to failure/issues- upgrade to the Hitachi MAF for more consistent performance. Engine: QR25DE / VQ35DE Learn More -
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More -
Juke "Sprint Series" Front Mount Intercooler Kit
Regular Price: $949.99
Special Price $729.98
Juke "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Can be used with Stock OEM Nissan Intercooler piping or Injen to 2JR hardpiping kit. Features and Benefits: - Direct fit for the 2011-2015 Nissan Jukes (CVT, 6MT, FWD and AWD) - all RS models all years - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
Juke FWD Downpipe (2011-2014 & RS)
Regular Price: $479.00
Special Price $398.78
Juke FWD Downpipe (2011-2014 & RS) 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. Now includes billet aluminum bracket to limit exhaust flex under load. A defouler is not required with this downpipe. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Up to 305wtq - stock turbo +330wtq - Mamba 21TK +440 whp - Garrett G Series Turbo Learn More -
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit
Regular Price: $899.00
Special Price $679.98
B17 Sentra Turbo "Sprint Series" Front Mount Intercooler Kit 2JR Sprint Series FMICs are designed to be used on the street or track with no limitations in performance and to be a complete drop in kit. Kit includes all the hard piping! From the turbo to the throttle body. Complete kit! NOTE: Send us a message on FB or IG for the Install Video! Features and Benefits: - Direct fit for the 2017-2020 Nissan Sentra B17 Turbo(SR and Nismo models) - 27" Long intercooler design optimized for maximum flow - No modification to front bumper and retains stock fog lights - Maximum cooling efficiency with minimal pressure drop - Max power gains of 19HP and 22 feet per pounds of torque - Drops intercooler outlet temperatures by 38°F - Increases core size by 138% and fin surface area by 42% All the hardware required to complete your installation is likewise included. Learn More -
H&R 07-12 Nissan Altima Sport Spring
Regular Price: $439.78
Special Price $329.78
Fitment Information Nissan Altima Coupe/Sedan 4 Cyl/6 Cyl (2007, 2008, 2009, 2010, 2011, 2012 ) Specs & Features Coupe: Lowers 1.2" Front and 1.2" Rear Sedan: Lowers 1.5" Front and 1.2" Rear Includes all lowering springs Works with factory shocks or aftermarket shocks that fit stock springs. H&R Sport Springs offer superb ride quality and are H&R's number one selling product. These lowering springs offer some of the best ride characteristics of any lowering spring and offer enhanced handling while giving your car just the right amount of lowering to close the fender gap. H&R Sport lowering springs lower the vehicle center of gravity and reduce body roll for incredible handling improvements. H&R Sport springs are progressive rate and work fantastic with aftermarket, factory or performance shocks. On older vehicles we do recommend to upgrade the shocks at the same time. Includes all 4 springs for a complete setup. Learn More -
QR25 Main / Rod Bearing Set w Thrust
Regular Price: $168.40
Special Price $139.14
QR25 Main and Rod Bearing Set with Thrust Washers Fits ALL QR25 engines. Bearings are Japan Made Daido Metal OEM Spec. Thrust Washers are OEM Nissan. Bearings can be ordered in standard, +25, +50, +75 Daido Metal Engine bearings are the mainstay of Daido Metal’s operations, and have been adopted by all Japanese automobile manufacturers, as well as the majors in other countries. We have the leading market share in Japan for plain bearings for engines. Today’s sophisticated, high-technology engines pose demands for high performance and efficiency. Our bearings are also used for the high-speed engine of race cars, including Formula 1, and provide an ultra-high-tech edge in motor sports applications. Learn More -
B15 V2 High Performance Twin Tip Catback
Regular Price: $699.99
Special Price $599.98
The V2 High Performance Catback for the 02-06 Sentra SE-R is now available. Handmade using the highest quality 2.5" Stainless Steel and Tig welded for long life and amazing looks. Our V2 Catback exhaust system has the largest rear muffler we could stuff under the B15 chassis. Pair this with the venerable Medusa Header and Resonated 2.5" stainless midpipe for the ultimate in performance, power and looks. Includes 3 gaskets / hardware kit. Made for your B15 by the folks that race their B15. Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo 6-Speed Single Piece Steel Flywheel
Regular Price: $525.00
Special Price $462.77
Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo 6-Speed Single Piece Steel Flywheel Part Number: cmFW-178-SF Description: Lightweight Steel Flywheel Weight: 23lbs *Going from a Dual-Mass Flywheel (DMF) to a Single-Mass Flywheel (SMF):* A Dual Mass Flywheel (DMF) is a flywheel in two concentric parts or two facing flywheels stuck together with flexible compound to damp down transmitted vibration and gear rattle for the gear box. Many newer model vehicles now come standard with a factory DMF. Many times enthusiast choose to replace a DMF with an SMF and here is why: * DMF’s tend to be more expensive than an SMF. * DMF’s are not designed to be resurfaced like conventional SMF. * DMF’s usually weigh 30+ lbs depending on the application which will cause unwanted turbo lag. * DMF’s cannot withstand a high rate of abuse and may fail under spirited driving. *Benefits of switching to a SMF:* * Reduced mass equals increased acceleration. * Reduces turbo “lag” in turbo-charged engines. * Increased supercharger efficiency due to less drag on the crank. * Improved mid-range torque in naturally aspirated engines. * SMF's are able to be resurfaced and can be reused. Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX100 Clutch Kit
Regular Price: $546.00
Special Price $465.11
Clutch Masters Nissan SR Sentra Turbo 1.6T 6 Speed FX100 Clutch Kit Heavy duty pressure plate. Steel-backed Organic disc. Sprung disc. Upgrade kit, requires Clutch Masters flywheel (sold separately). Hydraulic slave cylinder included. MUST USE CM FLYWHEEL SOLD SEPARATELY *Features* * High performance street system * Holding capacity 70% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo FX350 Clutch Kit
Regular Price: $603.75
Special Price $523.18
Clutch Masters Nissan SR Sentra Turbo 1.6L Turbo FX350 Sprung Disc Clutch Kit Heavy duty pressure plate. Fiber Friction lined disc. Sprung disc. Upgrade kit, requires Clutch Masters flywheel (sold separately). Hydraulic slave cylinder included. The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs. Learn More -
Clutch Masters Nissan SR Sentra Turbo FX400 Sprung 6-Puck Ceramic Clutch Kit
Regular Price: $603.75
Special Price $523.75
Clutch Masters Nissan SR Sentra Turbo 6-Spd 1.6T FX400 HD PP Sprung 6-Puck Ceramic Clutch Kit FX400 Clutch Kit; Heavy Duty Pressure Plate; 6-Puck Ceramic Sprung Disc; Change Over Kit w/o Flywheel; Will Only Work w/ CM Flywheel Ceramic System, 170% over stock holding capacity Ultra Heavy Duty Street and/or Racing. The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool Learn More -
Nissan B17 Sentra SR/Nismo Blow Off Valve Upgrade
Regular Price: $168.77
Special Price $142.54
Fits the GenII MR16DDT Engines - B17 Sentra Turbo Models THE SIMPLE & ESSENTIAL MOD FOR 30% QUICKER BOOST By retaining the factory ECU control and recirculating the vented air, the GFB BOV is a purely performance oriented product that offers the following benefits: Sharper throttle response Faster boost recovery on gearshift Solves boost leaking issues Built to last UTILIZING PROVEN TMS TECHNOLOGY TO ENSURE DEPENDABLE BOOST HOLDING AND OPTIMUM THROTTLE RESPONSE. The T9362 is a fully recirculating direct factory replacement for the pneumatic diaphragm type BPV (Bypass Valve) used on Renault Cleo RS – when you want the performance WITHOUT the noise! Using GFB’s TMS technology it can help return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears Learn More -
Sentra SR/Nismo OEM Nissan NGK Iridium Plug Set (4) all years
Regular Price: $109.77
Special Price $99.78
Sentra SR/Nismo OEM Nissan NGK Iridium Plug Set (4) all years Fits all years/models - 2016 and Up Turbo Sentra SR and Nismo Models with 1.6L Turbo Engine NGK builds two types of iridium spark plugs: OE Iridium and Iridium IX®. Every plug in the Laser Series was designed for an OEM application. All dual precious metal plugs are designed to provide maximum longevity. For the OE Iridium series, dual precious metal means iridium on the center tip and platinum on the ground electrode. Some of these plugs have special resistors or multiple ground electrodes, depending on the original equipment requirements. The Iridium IX® spark plugs are a single precious metal aftermarket performance plug. They are a great option for modified engines, and where recommended, are appropriate replacements for OEM spark plugs. Iridium IX® plugs are an excellent upgrade from standard nickel plugs. The Iridium IX® plugs are offered in various heat ranges and sizes to fit most automotive and non-automotive applications. These two plugs perform similarly, due to their fine-wire tip design, but the service interval is different; the Laser Series are typically designed to last 80 to 100 thousand miles, where as the Iridium IX® spark plugs are designed to last 40 to 50 thousand miles. Learn More -
Juke OEM Nissan NGK Iridium Plug Set (4) all years
Regular Price: $109.77
Special Price $99.78
Juke OEM Nissan NGK Iridium Plug Set (4) all years Fits all years/models - 2011 to current Nissan Juke (inc Nismo and RS) Gen 1 and Gen 2 NGK builds two types of iridium spark plugs: OE Iridium and Iridium IX®. Every plug in the Laser Series was designed for an OEM application. All dual precious metal plugs are designed to provide maximum longevity. For the OE Iridium series, dual precious metal means iridium on the center tip and platinum on the ground electrode. Some of these plugs have special resistors or multiple ground electrodes, depending on the original equipment requirements. The Iridium IX® spark plugs are a single precious metal aftermarket performance plug. They are a great option for modified engines, and where recommended, are appropriate replacements for OEM spark plugs. Iridium IX® plugs are an excellent upgrade from standard nickel plugs. The Iridium IX® plugs are offered in various heat ranges and sizes to fit most automotive and non-automotive applications. These two plugs perform similarly, due to their fine-wire tip design, but the service interval is different; the Laser Series are typically designed to last 80 to 100 thousand miles, where as the Iridium IX® spark plugs are designed to last 40 to 50 thousand miles. Learn More