Search results for '2011 altima'
-
2JR Juke Remote UpRev Tuning - includes standard cable, license and 2JR Tune
Regular Price: $850.99
Special Price $799.78
For V1 Motors and all RS models ONLY (2011-2014 all models, and RS all years) Will not work on V2 Juke Motors - 2015 and Up (except RS) Allow 2JR to remotely tune your Nissan Juke via UpRev. 2JR provides the license, cable and software links - and works their tuning expertise to dial in your Juke based on your mods and driving style (street / autox / track). 2JR will walk you through the process of simply datalogging the ECU during driving and we will review your data and provide a tune back to you. Typically 6-8 datalogging sessions are required to dial it in to 2JR's high tuning standards. This can take up to two weeks of working with you - so certainly your patience is always appreciated through this process. FYI - your UpRev license can always be flashed back to the cable and the cable sold in the future should you sell your vehicle / part out. This can also be done if you are going in for warranty work. 2JR can provide you with the back to stock rom in these situations at no charge. Learn More -
Nissan Juke AWD Midpipe
Regular Price: $319.99
Special Price $239.78
Nissan Juke AWD Midpipe (fits all years) Application: Nissan Juke CVT All Wheel Drive (AWD) Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm AWD: No Defouler Needed The 2JR midpipe replaces the restrictive factory midpipe and catalytic converter with a larger, 70mm stainless steel mandrel-bent system, featuring a stock flange that bolts to the factory catback or aftermarket/2JR catback. Expect better throttle response, more horsepower (+12whp dyno proven w/o a tune) and an intoxicating exhaust note, while remaining civilized during normal daily driving. It’s one of the best performance upgrade for the Juke. NOTE: to fit with AWD Stillen catback you must run a flat 2 bolt flange at the front of the Stillen catback Learn More -
2JR FWD Juke 70mm Stainless Catback Exhaust
Regular Price: $789.99
Special Price $698.78
Out of stock
Fits Gen1 and Gen2 FWD Juke Models Performance to blow your mind, not your ears! Improve your FWD Juke's performance with this cat-back exhaust system from 2JR. We took on the task of finding the perfect balance between maximum performance increase and a responsible noise level to appeal to Juke enthusiasts of all levels. All 2JR Exhaust products are direct replacements for factory exhaust systems, meaning no modifications are required for proper fitment - this includes our downpipe, midpipe and catbacks. This cat-back exhaust system is manufactured of a 70mm T304 anti-magnetic stainless steel that is less susceptible to discoloration when compared to other systems found on the market. This quality T304 stainless steel is used on all of the pipework including the construction of the mufflers and resonators. Mandrel bending ensures full flow bends for better exhaust gas flow and 2JR systems are increased in bore (70mm) to ensure the ultimate performance without the loss of mid-range torque. This is the perfect size for the MR16 engine. This catback exhaust powers our own Juke to over 360ft lbs and 300hp. Exhaust tone has ZERO rasp, excellent tone quality without being loud - even with our catless downpipe and midpipe. Fit all years - Juke 2011 to Current Models. All ranges (S, SV, RS, Nismo) , with turbo 1.6 MR16DDT. Will NOT fit AWD Models. Fits 2JR, Stock and Injen midpipes Kit Includes: Resonated mid pipe Polished Rear muffler Polished GT80 tip Installation hardware (vibrant clamp, hardware) Learn More -
QR25DE (02-06) Hi-Power Spyder Header
Regular Price: $499.99
Special Price $439.78
QR25DE (02-06) Hi-Power Spyder Header In Stock Materials: Brushed 304 Stainless Steel Fitment: Does NOT require a fan change (fits OEM fans) / Alternator clearance bracket is NOT required / Fits on OEM Midpipe or 2JR Midpipe Chassis: 02-06 Sentra QR25 02-06 Altima QR25 Performance: Excellent low end TQ with good top end results on the Dyno. Includes all stainless steel construction with thick flanges and collector. Includes a spike in the collector for increased HP. 1.75" Primaries step up to 2" secondary runners for TOP END POWER! Slightly offset piping size gives the header a nice deep rumble. Learn More -
Nissan Juke AEM Cold Air Intake (11-14)
Regular Price: $399.98
Special Price $389.00
Nissan Juke AEM Cold Air Intake Fits 2011-2014 (and all Nismo RS) Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. Piping Color - Gunmetal Part: aem21-734C Learn More -
Nissan Juke Turbosmart Kompact Series Plumb Back BOV
Regular Price: $166.04
Special Price $159.99
Nissan Juke Turbosmart Kompact Series Plumb Back BOV 2011-2014 and Nismo RS (all years) The Kompact Series BOVs have been designed as a bolt-on replacement for the Nissan Juke - all years, the Kompact Series products offer superior flow, full adjustability and greater structural integrity under boost. Ideal for cars with constrained engine bay access *DESCRIPTION:* Fully recirculating BOV. The Plumb Back systems vents all excess pressure back into the intake system. Great for enthusiast not wanting to be noticed. Learn More -
2JR QR25 Hi-Power RZ Cams (2002-2012 QR25DE)
Regular Price: $699.99
Special Price $649.99
2JR in conjunction with JWT releases the highest hp cam set available for the (02-12) QR25. With gains up to 235whp on race gas. 2 years of dyno testing, track use and street testing has perfected these cam sets. A tune IS required for the performance of these cams. THEY ONLY WORK ON HIGH COMP and WILL LOSE SOME LOW END UNDER 3K - 15HP. But they will scream after 5k and can rev past 8K However, they will produce a lopey idle. Everyone will know your QR is cammed! Cam gear is not included and CANNOT be used on these high lift cams Available for both 02-06 QRs and 07-12 QRs - Will fit Sentra, Altima and Frontier - all years with 2.5L Engines Learn More -
QR25DE - ARP Head Stud Kit (all years)
Regular Price: $179.99
Special Price $159.99
Application: QR25DE - All years / Models (b15, b16, altima, rogue)Pro series cylinder head studs from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining and are rated at a whopping 200,000 psi for the 8740 material and 220,000 psi for ARP2000. ARP Pro series kits are also available with 12-point nuts, and all kits come complete with hardened parallel washers for an even load distribution and accurate torque readings.
Learn More -
02-06 Sentra/02-03 Maxima/Altima Delrin Shifter Bushings
Regular Price: $69.99
Special Price $57.98
CNC'd from Delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. Includes Interior and Transmission Bushings (6 pieces). Optional Billet Aluminum Short Shifter can be added as a combo for 30% shorter shifts. ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kitATTEN: CHECK THE PRODUCTION DATE OF YOUR SENTRA. IF ITS AN 04 MODEL PLEASE MEASURE YOUR BUSHINGS. If both the bushings on the transmission are the SAME SIZE 1.1" (outside diameter), then choose 02-03. If the top transmission bushing is larger than the lower bushing 1.4" and 1.1" respectively, then choose the 04-06. For any other year - you do not need to measure the bushing. Maximas/Altimas do not need to measure the bushing (2002-2003) Instructions: https://1drv.ms/b/s!AjQkUN52fS1SqSUMoguVkM_bn_n9?e=UbrtBj Learn More
-
Fiesta ST - Wilwood Front Big Brake Kit
Regular Price: $1,059.98
Special Price $969.78
Fits Fiesta ST and all Fiesta models (2011- current) The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.19” diameter rotors for this group of front wheel drive sport compact kits. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application. Fits all 17" rims - no spacers required. Some 16" rims will clear, please call to confirm. Wilwood Stainless Line Kit is REQUIRED for install (includes all fittings) 2JR allows you to choose your brake pad compound / Rotor Type / Caliper Color BP10 - Street BP20 - Street Performance BP-Q Street Performance / Very Low Dust / Low Noise (suggested) PolyMatrix B - Racing Pad Set (best for AutoX, Track Days) Kits may take approx 2-3 weeks to build/ship Brake Pad Info/Specs: http://www.wilwood.com/BrakePads/BrakePadsApp.aspx Learn More -
Sentra/Maxima 2JR Nismo Short Throw Shifter / optional Shifter Bushings
Regular Price: $99.99
Special Price $65.98
Nismo-style short throw billet shifter (STS) for the 2002-2006 Sentra B15 and 2002-2003 Altima/Maxima. Reduces throw by 30% without causing stress on the shifter cables which can lead to breakage. Provides a more direct, positive shift for each gear. Downside is a slight "tink" when shifting due to the billet shifter assembly. Excellent upgrade for your Nissan, especially when paired with 2JR's delrin Shifter Bushings Available in red or black The STS can used on stock Nissan shifter bushings or with 2JR's delrin shifter bushings as a combo kit. CNC'd from delrin. Replaces factory rubber bushings on the transmission with solid bushings for a more direct and crisp shift. These are the best bushings 2JR has ever produced. They will never wear out, never need grease, and never absorb water and corrode. Includes Interior and Transmission Bushings (6 pieces) ONLY FITS 2002-2006 Sentras 2002-2003 Maximas/Altimas (runs 04 interior bushing kit / 02 trans kit) Learn More -
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
OEM Nissan B15 QR25 Full Engine Rebuild Kit (02-06)
Regular Price: $629.99
Special Price $589.98
Full rebuild kit for your Gen 1 (02-06 Sentra, Altima) QR25 that includes everything you need to rebuild your QR yourself. DOES NOT FIT THE FRONTIER
Headgasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Valve stem seals
All necessary O-rings
Front seal and rear main sealMain and Rod Bearings
10 Head Bolts
Oil Pump / Water Pump
Cam and Crank Sprockets
Main Timing Chain
Main Tensioner
All Chain Guide Rails
Learn More -
2JR Underdrive Lightweight Power Steering Pulley (QR25)
Regular Price: $89.99
Special Price $69.98
2JR releases the lightest power steering pulley ever made for the B15. The underdrive size increases the torque and horsepower output of the QR25 by reducing parasitic drag caused by the belt-driven power steering, but more importantly by reducing the moment of inertia. Excellent steering feel and with a more weighted response in the wheel. No more pump cavitation during extreme cornering. Color:Blue, Black or Red Hard Anodized, 2JR Logo Weighs just 11oz!! Dayco poly rib #5060895 belt REQUIRED. Or similar 89.5" length belt Fits 02-06 Nissan Sentra SE-R & Spec-V (2.5L) 02-06 Nissan Altima 2.5L Does not fit B16s Learn More -
Nissan Sentra Lightweight Racing Pulley 2.5L, QR25DE, Fits Sentra, Altima, Frontier
Regular Price: $129.99
Special Price $99.98
Nets 5whp/5wtq! 2JR introduces a lightweight solid billet 6061 racing pulley that weighs 80% less than the stock pulley (5.1 lbs vs 1lb 2JR), which translates into less rotational mass and quicker revving. All pulleys are built with the factory timing marks and DO NOT require a belt change. This is a simple bolt on for more power in less than 30mins. Fits all 2.5L Sentra B15, Sentra B16, Altima and Frontier
Choose between Red/Blue/Black. Also available with 2JR Powersteering pulley for all 02-06 2.5L QRs. Learn More -
JWT VQ35 MAXIMA/ALTIMA CLUTCH KIT
$529.48350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track, including boosted cars! Learn More -
JWT LIGHTWEIGHT FLYWHEEL MAXIMA/ALTIMA VQ35
$491.27V6 Altima / Maxima aluminum flywheel weighing in at 15 lbs. Learn More -
S2 CAM SET FOR VQ35DE
$1,269.00JWT S2 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
S1 CAM SET FOR VQ35DE
$1,269.00JWT S1 BILLET CAMS ADD 15+HP WHILE MAINTAINING EXCELLENT DRIVABILITY AND GOOD IDLE QUALITY. EVEN MORE AWESOME WHEN COMBINED WITH A TUNED EXHAUST AND OUR POP-CHARGER INTAKE SYSTEM. Learn More -
VQ35 C-2 JWT CAMSHAFT SET
$1,386.33C-2 JWT CAMSHAFT SET VQ35 261 DEG. / .456" (11.58MM) LIFT RACE CAM SET FOR NA AND BOOSTED ENGINES. JWT Valve Springs and Shims are REQUIRED Learn More