Search results for '4x114 & 4x100'
-
Limited Run - 2JR Focus RS Cowl Induction Intake
Regular Price: $349.99
Special Price $299.00
WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus RS. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. - Powdercoating adds 15-20 days. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didnt incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Additionally, we also recommend a sound suppression chamber. The purpose is to reduce the intake whistle sounds that accompany aftermarket intakes. Mountune and Cobb both make a sound suppression chamber and are available as options to add to your purchase. Learn More -
APEXI SAFC 2 II S-AFC Super Air Flow Converter
Regular Price: $429.98
Special Price $399.98
The SUPER AFC II is a fuel adjustment controller in which the airflow sensor signal or the pressure sensor signal can be modified in a 12 point RPM range by 1% increments to increase/decrease fuel in a range of ＋50% to －50%. The RPM to be corrected can be optionally set in 200 RPM increments, and corrections can be made according to throttle opening amounts. In a turbo equipped vehicle with a hot wire type airflow meter, this controller provides a preventive function for engine stall due to blow-back during throttle return. The controller, which includes a knocking meter, allows the monitoring of knock levels check keeping the engine under its optimum condition at all times. (Vehicle must have a factory knock sensor Step by Step install http://www.allsentra.com/viewtopic.php?t=10&fbclid=IwAR2rxswRey3oDAO1HcVkUrB4cKpcMldgkJ0wV4LTQ5GA7wdpbzFTpSydRY8 Instruction Manual https://apexi-usa.com/manuals/electronics/safc2_manual.pdf Wiring https://apexi-usa.com/manuals/electronics/safc2_wiring.pdf Learn More -
AEM 2009+ Nissan 370Z 3.7L Cold Air Intake
Regular Price: $479.99
Special Price $449.99
AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Outperforms every other Cold Air system on the market * Manufactured and assembled in the USA * 50-state legal or pending legality * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life Learn More -
K&N 09-10+Nissan/Infiniti 370z/G37 V6-3.7L Typhoon Intake
Regular Price: $649.99
Special Price $629.99
The K&N 69-7078TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 370Z and Infiniti G37 models. The restrictive factory air filters and air intake housings are replaced by the K&N Typhoon air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intakes. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7078TS air intake comes with dual black rubber topped K&N high-flow air filters and heat shields that install into the previous air box spaces. Air is directed through the intake tubes into the engine's throttle bodies for a guaranteed power gain. The intake tubes have an attractive silver powder-coated finish that's made to last and accommodate the factory mass air sensors and crank case vent hoses. The oversized cone shaped air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake system is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
Weapon R 03-06 Nissan 350Z (Revised 3.5in Performance Pipe) Dragon Intake
Regular Price: $272.61
Special Price $218.99
Weapon*R Dragon Intake Systems are one of the mostly highly rated intake systems in the world. Used in many countries in many different forms of racing. Also recently rated "Best Overall Performer", outperforming Cold Air & Short Ram Intake systems, in the 2003 Tuner Performance Reports, Intake system Battle. Our Intake Systems are CNC Mandrel Bent out of 6061 aluminum, and then Hand Tig Welded to ensure a positive seal and proper fitment. Each one of our intake systems is carefully tuned, by matching the engines displacement, air intake capacity and airspeed to the intake systems tube size and length, maximizing every engines performance output. This Intake is matched with our World Famous Dragon Filter, which provides maximum airflow, with the protection of high quality dense Poly Urethane Foam. Many studies have shown Flow rates of up to 80% more Air and Better Dirt Filtration with Foam Filter than the conventional cotton filter. The Dragon Filter features a Computer CAD Designed and Flow benched Tested Velocity Stack, which greatly increases airflow and air volume into the engine, therefore increasing engine performance. Another one of the Dragon Filters positive features are the capability to be disassembled to be cleaned and then re-assembled after cleanings or to change the color of the foam filtering element. Learn More -
AEM 350z Silver Cold Air Intake
Regular Price: $479.99
Special Price $399.99
AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Outperforms every other Cold Air system on the market * Manufactured and assembled in the USA * 50-state legal or pending legality * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life Learn More -
Torque Solution Throttle Body Spacer (Silver): 03-06 Nissan/Infinti VQ35DE
Regular Price: $77.77
Special Price $69.00
Torque Solution Throttle Body Spacers are designed to increase Horsepower & Torque. By creating more intake manifold volume along with a better air fuel mixture you will make more power and get better fuel economy. CNC Machined from 6061 Billet Aluminum we can assure you the fit and finish is perfect. Pair the spacer up with a Thermal Throttle Body Gasket & Intake Manifold Gasket (not all applications) for even better gains by reducing the heat transfer from your engine. For the serious racer we have also drilled and tapped the spacer for a 1/8" NPT nitrous jet or vacuum/boost reference port. *Features:* * 6061-T6 Billet Aluminum * Tapped for Nitrous * Install in Minutes * Better Fuel Economy * Hard Anodized Finish * Lifetime Warranty * Made in USA Learn More -
K&N 03-05 Nissan 350z V6-3.5L Performance Intake Kit
Regular Price: $429.99
Special Price $349.99
K&N Fuel Injection Performance Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today. FEATURES * Guaranteed to Provide more HP and Increased Acceleration * Engineered to Specific Vehicle Design * Easy to Install, Usually in 90 minutes or less! * Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) * Million Mile Limited Warranty * Replaces OEM Filter and Air Box * Air Filter is Washable and Reusable * Works with Original Equipment Manufacturer Computer Systems * Designed to use Factory Holes & Mounting Points Whenever Possible * Most are CARB Exempt and street legal in all 50 US States Learn More -
Torque Solution 03-06 Nissan 350Z / 02-09 Nissan Maxima 3.5L V6 Throttle Body Spacer (Red)
Regular Price: $77.77
Special Price $69.00
Torque Solution Throttle Body Spacers are designed to increase Horsepower & Torque. By creating more intake manifold volume along with a better air fuel mixture you will make more power and get better fuel economy. CNC Machined from 6061 Billet Aluminum we can assure you the fit and finish is perfect. Pair the spacer up with a Thermal Throttle Body Gasket & Intake Manifold Gasket (not all applications) for even better gains by reducing the heat transfer from your engine. For the serious racer we have also drilled and tapped the spacer for a 1/8" NPT nitrous jet or vacuum/boost reference port. *Features:* * 6061-T6 Billet Aluminum * Tapped for Nitrous * Install in Minutes * Better Fuel Economy * Hard Anodized Finish * Lifetime Warranty * Made in USA Learn More -
Mishimoto 03-06 Nissan 350Z Performance Air Intake
$237.95Add some horsepower and sound to your Nissan 350Z's VQ35DE engine with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2003--2006 Nissan 350Z and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides maximum gains of 10 hp & 13 tq over the stock intake while maintaining safe air/fuel ratios. This kit is simple to install, making it perfect for some extra punch on the street or autocross course. The Mishimoto Nissan 350Z Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The stock MAF housing is retained which translates into a smooth power band with safe air / fuel ratios. To reduce air intake temperatures (IATs), a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The heatshield bolts right up to the stock inlet duct on the front support to draw in the maximum amount of outside air into the filter. The heatshield also comes fully assembled with protective rubber strips to fully seal it from hot engine bay heat and prevent any vibrations during operation. The Mishimoto high-flow air filter features an integrated venturi and center inlet stack for smooth, high velocity airflow. The large filter provides 271% greater surface area over stock and provides proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Along with an upgrade in power, this intake also provides an aggressive and deep-sounding intake tone that is a huge improvement over the stock intake. The Mishimoto Nissan 350Z Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
Juke AWD Downpipe (2011-2014 & RS)
Regular Price: $479.00
Special Price $398.78
Juke AWD Downpipe (2011-2014 & RS) 2011-14 and all Nismo RS models 2JR releases their Juke Downpipe for the Nissan Juke with huge upgrades over the prev version. New stainless encased flex section, thicker 1/2" flanges, all 304 Brushed stainless. If you want to make big power, this is the upgrade for you. Free flowing turbo spool, less lag and more response. Direct Fitment - no modifications to the exhaust or engine required. Optional defouler to help assist the the check engine light. NOTE REUSE YOUR OEM LOWER BRACKET AS SHOWN IN PICTURES. Learn More -
Borla Ford Focus RS Catback Exhaust S-Type 3in - 2.25in w/ Carbon Fiber Tip
Regular Price: $1,303.99
Special Price $1,299.99
Borla Cat-Back And Axle-Back multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, Borla stands behind every system with a Million-Mile Warranty. Just what you?d expect from the world?s most experienced (and most winning) exhaust brand. Learn More -
Injen Ford Focus RS Special Edition Blue Cold Air Intake
Regular Price: $307.76
Special Price $295.99
Ford has finally given a us Focus with the infamous “RS” badge, here is the states. So naturally we wanted to give it the air flow it deserves. The Injen R&D Team has spent many hours on development, dyne testing and data collection, so that our intake gives you the best results possible. This is a SP intake, replacing every component in the OEM system, including the airbox and the intake pipe. The SP9003 includes a 3” aluminum pipe that routes all the way to the turbo, with all of the necessary parts to produce a perfect fit. The heat shield has a similar shape to the stock airbox, but is open on the sides and top, so that the filter is exposed to more air while also sealing the top of the shield against the hood, helping to block engine heat. The SP9003 uses the factory air inlet ducts, grabbing air right from the front of the car. We have put our intakes through miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 17 hp and 20 ft-lb of torque. As Always no cutting or modification to factory components are necessary. The SP9003 air intake is a direct bolt-on for the 2016 Ford Focus RS, and come with all necessary hardware to allow for a quick and simple installation. On top of all that this product is covered by our unbeatable Warranty. Learn More -
Injen Ford Focus RS Wrinkle Black Cold Air Intake
Regular Price: $307.76
Special Price $295.99
Ford has finally given a us Focus with the infamous “RS” badge, here is the states. So naturally we wanted to give it the air flow it deserves. The Injen R&D Team has spent many hours on development, dyne testing and data collection, so that our intake gives you the best results possible. This is a SP intake, replacing every component in the OEM system, including the airbox and the intake pipe. The SP9003 includes a 3” aluminum pipe that routes all the way to the turbo, with all of the necessary parts to produce a perfect fit. The heat shield has a similar shape to the stock airbox, but is open on the sides and top, so that the filter is exposed to more air while also sealing the top of the shield against the hood, helping to block engine heat. The SP9003 uses the factory air inlet ducts, grabbing air right from the front of the car. We have put our intakes through miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 17 hp and 20 ft-lb of torque. As Always no cutting or modification to factory components are necessary. The SP9003 air intake is a direct bolt-on for the 2016 Ford Focus RS, and come with all necessary hardware to allow for a quick and simple installation. On top of all that this product is covered by our unbeatable Warranty. Learn More -
Injen Ford Focus RS Polished Cold Air Intake
Regular Price: $307.76
Special Price $295.99
Ford has finally given a us Focus with the infamous “RS” badge, here is the states. So naturally we wanted to give it the air flow it deserves. The Injen R&D Team has spent many hours on development, dyne testing and data collection, so that our intake gives you the best results possible. This is a SP intake, replacing every component in the OEM system, including the airbox and the intake pipe. The SP9003 includes a 3” aluminum pipe that routes all the way to the turbo, with all of the necessary parts to produce a perfect fit. The heat shield has a similar shape to the stock airbox, but is open on the sides and top, so that the filter is exposed to more air while also sealing the top of the shield against the hood, helping to block engine heat. The SP9003 uses the factory air inlet ducts, grabbing air right from the front of the car. We have put our intakes through miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 17 hp and 20 ft-lb of torque. As Always no cutting or modification to factory components are necessary. The SP9003 air intake is a direct bolt-on for the 2016 Ford Focus RS, and come with all necessary hardware to allow for a quick and simple installation. On top of all that this product is covered by our unbeatable Warranty. Learn More -
K&N Typhoon Performance Intake Kit (2011-2014) Juke
Regular Price: $399.98
Special Price $378.98
K&N Typhoon Performance Intake Kit (2011-2014) Juke Fits all turbo (MR16DDT) Juke Models 2011-2014 Fits all RS Models, all years The K&N 69-7079TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan Juke models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7079TS air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and fresh air intake tube. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
K&N 2014-Current Ford Fiesta ST 1.6L F/I Performance Air Intake System
Regular Price: $172.89
Special Price $145.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.Certain 57-series intakes are designed to function with the factory air box, and feature a panel filter paired with a custom roto-molded intake tube. Learn More -
AEM 2014-Current Ford Fiesta ST 1.6L L4 - Cold Air Intake System - Wrinkle Red
Regular Price: $263.99
Special Price $259.99
AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Outperforms every other Cold Air system on the market * Manufactured and assembled in the USA * 50-state legal or pending legality * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life Learn More -
aFe BladeRunner 2.5in Red Intercooler Tube Cold Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $220.99
Special Price $215.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More -
aFe BladeRunner 2.5in Red Intercooler Tube Hot Side 2013-Current Ford Focus ST 2.0L (t)
Regular Price: $262.99
Special Price $255.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us. Learn More