Search results for 'b15'
-
2JR Billet 5-Lug Brake Hat / Wilwood
Regular Price: $139.99
Special Price $69.99
2JR milled from billet aluminum brake hats for the Wilwood 12.2" 4 piston and 6 piston brake kits (B15 Sentra ONLY). Finally you can get your super light Wilwood B15 kits with double drilled hats - both 4x114.3 and 5x114.3. Perfect choice for those who are 5 lug or are going 5 lug in the future. All 2JR Rear Big Brake Kits come in the double bolt pattern. In Stock! SOLD AS EACH Learn More -
Aluminum (ACB+) Heavy Duty Alternator Clearance Bracket (B15 and B16)
Regular Price: $99.99
Special Price $79.99
ACB+ Made from Aluminum for extra long life and durability. Alternator clearance bracket allows you to remove your header without having to remove your alternator. Adds over 2" of clearance. Keeps the alternator somewhat cooler as well. Includes hardware and threaded ends. You must check for clearance between the ACB and the alternator bracket on the engine - and add a washer if necessary. Learn More -
2JR B15 340LPH Direct Fit Fuel Pump (2002-2006) QG & QR
Regular Price: $179.99
Special Price $99.99
2JR High Volume 340LPR Race Fuel Pump for the B15 chassis. 2JR uses the exact same internals as the OEM Bosch Pump but we upgrade the motor armature with less turns, thicker wire, for 90% more rpm, which means more flow. Our pump is a direct drop in to our B15 Nissan canisters. No cutting or trimming is required.! All Walboro and other aftermarket fuel pumps are too long which makes for a difficult install. Direct fitment in your B15 - fits both QG and QR motors (1.8L and 2.5L) 2002-2006 ONLY Compatible with E85 For Turbo Builds over 350whp Also available is 255LPR pump Learn More -
B15 V2- Billet Aluminum Radiator Supports (Pair)
Regular Price: $51.99
Special Price $39.78
Version 2 - Made from Billet 5/8th Thick 6061 Aluminum Fits all B15 Radiators - OEM or Aftermarket. The purpose is to replace the rusted, oversized and flimsy OEM radiator brackets to our solid billet rad supports for a more secure attachment and header/turbo clearance. By having more spacing to the header the radiator will stay cooler. You will reuse your OEM bolts to secure or you may also use the optional fender washers - in either red or black. Learn More -
B15 QR Stainless Flex Resonated Midpipe 3.00"
Regular Price: $269.99
Special Price $239.98
Limited Run of Resonated Midpipes for the QR B15 Chassis with a flex section are now available in 3.0" size. Made from 304 Stainless Steel and mandrel bent to ensure the highest flow then paired with a stainless flex section and resonator to reduce rasp and noise. Will fit on the OEM and aftermarket exhausts as well as 2JR and aftermarket 4-1 headers. Includes rear gasket, bolts and nuts. You can add an optional OEM donut gasket or reuse your existing one. Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Stainless perforated core for extra long life. The resonator can be subbed out for a cat in the options. This will add about 1 week production time. Sounds absolutely AMAZING -
B15 Medusa 2JR 3" Stainless Steel (304) Catback Exhaust
Regular Price: $729.99
Special Price $699.78
A full mandrel bent 3" Full 304 Stainless Catback exhaust system for your 02-06 Nissan Sentra SER Spec-V. This catback has produced more HP than any catback we've tested on our dyno with nearly 9whp more than Magnaflow. It includes a large resonator up front and a large muffler and twin tips in the rear for clear, no rasp sound. No too loud, esp when paired with our new resonated front section midpipe. Includes all bolts, hangers, gaskets and includes slip fit midsection to get that perfect fit out back. Specifically designed for the QR25, this is the best exhaust system available for the 02-06 Nissan Sentra Spec-V.Made by 2JR and hand welded to perfection. We use only the best exhaust components for a complete full stainless system. Sounds absolutely AMAZING
-
B15 3" V3 High Power Side Exit
Regular Price: $499.99
Special Price $398.78
3" V3 High Power Side Exit - More HP! B15 3" V3 High Power Side Exit with even more HP gains than our V1 or V2. Quieter than before with amazing sound, with twin resonators - similar to a V6. This is the highest HP exhaust for the QR25. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Bolts to any midpipe in the factory location. Version 3: Twin Resonators - Both Pipes have Resonators 40% lighter than stock Add the 2JR 3" Resonated Midpipe for even deeper, 8db quieter sound NOTE: Version 3.5 - piping is NON-POLISHED STAINLESS STEEL Learn More -
2JR B15 340LPH Direct Fit Fuel Pump (2002-2006) QG & QR
Regular Price: $179.99
Special Price $99.99
2JR High Volume 340LPR Race Fuel Pump for the B15 chassis. 2JR uses the exact same internals as the OEM Bosch Pump but we upgrade the motor armature with less turns, thicker wire, for 90% more rpm, which means more flow. Our pump is a direct drop in to our B15 Nissan canisters. No cutting or trimming is required.! All Walboro and other aftermarket fuel pumps are too long which makes for a difficult install. Direct fitment in your B15 - fits both QG and QR motors (1.8L and 2.5L) 2002-2006 ONLY Compatible with E85 For Turbo Builds over 350whp Also available is 255LPR pump Learn More -
Cam Phaser Sprocket (02-06 QR25)
Regular Price: $339.87
Special Price $289.78
If your QR suffers from chain rattle at start up when cold, the issue more than likely is a bad intake sprocket phaser. This can lead to jumped timing, bent valves, broken chains and/or broken main crank sprockets. 2JR offers new cam phaser sprockets. We have these in stock! Do not wait to replace your sprocket and risk an engine failure. Learn More -
B15 Japan-Spec 555 Steering Tie Rods / Ball Joints - Kit or Pair (02-06)
2JR offers Japan Spec 555 Inner and Outer Tie Rod kits for your B15 (all models). You can also add high spec 555 Ball Joints for long life. These are the highest quality OEM replacement inner and outer tie rods you can buy for your B15. No mods required - bolts right in. Improve your steering response -even better when the B15 was new with 555 parts. Learn More -
Limited Ed - B15 Stainless Twin Resonated 2.5" V3 Side Exit
Regular Price: $489.00
Special Price $369.99
Version 3 of our side exit. Quieter than before with amazing sound - similar to a V6. Straight off our championship winning B15 and 50% lighter than stock with direct, bolt on fitment with two-position hangers for stealth or open look. You wont ever be mistaken for a Honda. Let your QR25 sound like it was supposed to with a rumble that gets noticed. Add optional 2.5" Resonated 2JR Flex Midpipe Version 3 - 2.5" stainless with 1/2" thick stainless flanges Twin Resonators (not shown) 50% lighter than stock Learn More -
2JR Spring Sport Springs with KYB Twin-tube Excel G Shocks - 1.5" Drop
Regular Price: $529.00
Special Price $429.00
The perfect combo! 2JR Sport Springs on KYB Shocks. Drops 1.5" over stock, with a perfect front to rear rake. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance. The progress spring rate allows for comfortable ride quality under normal driving conditions while providing maximum performance when being pushed to the limit.
Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15. Fits all models 02-06
Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in The KYB Twin Tubes are the absolute best product to restore original handling and control KYB's are: Calibrated to compensate for worn suspensions Components and valving are designed specifically for each application Designed to help restore OE performance for normal driving conditions Built with quality that matches or exceeds OE
Learn More -
2JR 5 Point Sport Ground Wire Kit - B15 Sentra
Regular Price: $139.99
Special Price $79.98
2JR's Heavy 2 Gauge 5 Point Ground System - the best is finally here. Direct fitment, attaches to the battery, ground point on the drivers fender, to the head, to the passenger shock tower and finally to the alternator bracket. Full grounding of the engine bay. 2J's Sport Ground System can't be compared to anything on the market. High Grade Wire, Silver Crimped Ends, Perfect Fitment! Any electrical component requires power and ground to function properly. If you have a stereo system, HIDS, Fogs, Interior lights and have a bad ground, you will get poor performance from your system. The same is true for any part of the electrical system of your Sentra. If the electrical system has a bad ground, or a barely adequate ground, you can get lower gas mileage, inefficient spark, slower window motors and dim lights. When you add 2JRs Sport 5pt Grounding Kit, you add more grounding points to your B15 to allow your electrical system to function at full capacity, which can make every electrical component operate more efficiently, often increasing horsepower, delivering better gas mileage, and crisper stereo systems Learn More -
SPC Performance EZ Camber XR Bolts - Pair (B15)
Regular Price: $39.99
Special Price $19.99
SPC Performance EZ Cam XR Bolts (Pair) (Replaces 12mm Bolts) EZ Cam XRs are designed for non-slotted struts. They allow both positive and negative camber changes up to approximately 1.75° (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. *Each EZ Cams each kit contains TWO pieces.* Range ±1.75deg Cam Learn More -
OEM B15 Crossmember Bolt Set
Regular Price: $32.94
Special Price $24.99
Nissan OEM Front and Rear Crossmember bolt set. Replace your rusted bolts with new zinc plated bolts from Nissan. 2JR Delrin Crossmember Wheel Hop Aid Bushings can be added as well to the order. NOTE: Long Bolts are for the REAR crossmember. Larger Lip Delrin Crossmember Bushings are for the Rear Short Bolts are for the FRONT crossmember. Smaller Lip Delrin Crossmember Bushings are for the Front The Flat Delrin Washers go between the crossmember and the chassis. The Lip Bushing goes on the bolt with the lip facing upwards - into the crossmember Choose 9.89 Shipping Learn More -
B15 Sentra ISC N1 Coilovers; Street Sport Series
Regular Price: $1,185.00
Special Price $859.00
The ISC N1 coilover is the optimum suspension tool for improved handling for your street or weekend track car. This product is perfect for someone looking for performance, adjustability (height and dampening) and other quality features. Our self-manufactured ISC N1 allows us to have top grade quality control, and innovative R&D capabilities due to our in house/ self-made company dynamic. ISC has been present for over 12 years in Asia and Australia, which accomplished drift, road course, street enthusiasts and podiums alike. Over a decade of experience and feedback has allowed the ISC N1 to evolve into what it is today. The ISC N1 Basic has all the great features of the regular N1 but has solid top plates instead of a camber plate/ pillowball application in the front. Many street enthusiasts do not need to have adjustable camber plates, so the Basic was made in order to simplify the product and eliminate any feature that may not be used for your average street car that is not going for track performance, or aggressive camber/ stance. The N1 Basic is also more affordable. *Specs:* * 6061 Aluminum * Top Grade Hardware, Pillowball Bearings * StreetSeal (TM) corrosion protectant technology * Anodized Finish * Light weight * Large Adjustment Range *Details:* * SO9001:2000R Certified * ARTC Certified * 5 Year Warranty: All service, rebuilds and warranty support are done here in our USA facility. All custom coilover orders are hand assembled here in our New Hampshire location. ISC reaches to have some of the best customer service in the industry. *32 Step Damper Adjustable:* * Rebound/ Compression adjusted in unison via 32 step adjustment Learn More -
B15 to B16 Throttle Body Spacer - 76mm
Regular Price: $149.99
Special Price $99.99
Massive 76mm Intake Plenum Spacer for the 2JR Plenum Kit. Adds over 3" of plenum volume to the intake - for more POWER. The inside is tappered to match the Throttle Body and Plenum sizes for a venturi effect. This is the best way add more horsepower to your Hi Power plenum. In stock ONLY WORKS WITH THE 2JR PLENUM! Learn More -
B15 (02-06) Sentra SpecV Injen SP Series Cold Air Intake
Regular Price: $396.98
Special Price $349.98
B15 (02-06) Sentra SpecV Injen SP Series Cold Air Intake 2.5L (02-06) Sentra Models CARB EO #: D-476-5 Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System Learn More -
Hawk B15 Sentra Performance Ceramic Street Front Brake Pads (non-Brembo)
Regular Price: $132.00
Special Price $120.00
Hawk B15 Sentra Performance Ceramic Street Front Brake Pads (non-Brembo)s - Fits all B15s except Brembo *Performance Ceramic ('Z' Compound Code)* Performance Ceramic is engineered to reduce brake NVH (Noise, Vibration and Harshness) creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic you can expect reduced brake pad wear, lower dust output levels and a rotor-friendly brake pad. * Increased Stopping Power * Increased Rotor Life * Extended Pad Life * Ultra-Low Dust * Extremely Quiet * Stable Friction Output Learn More -
Hawk B15 Sentra High Performance Street 5.0 Front Brake Pads (non-brembo)
Regular Price: $128.89
Special Price $101.99
Hawk B15 Sentra High Performance Street 5.0 Front Brake Pads (non-brembo) *High Performance Street 5.0 ('B' Compound Code)* The new High Performance Street 5.0 Pads are a Ferro-Carbon compound brake pads that provide advanced braking characteristics to enhance the driving experience. This new compound combines the safety and quality of aerospace design partnered with the braking technology of motorsports, the results are shorter stopping distances, improved performance under heavy braking conditions and street car friendly characteristics. * Pushing the Limits of ABS * Decreased stopping distances * Improved pedal feel from initial pressure through entire pedal stroke * Minimal fade under Higher Temps * High friction/torque hot or cold * Gentle on rotors * Very quiet, low noise * Improved braking over OE pads * Extended pad life Learn More