Search results for 'bent rear'
-
Remark E210 Corolla Hatchback Center Exit Catback
Regular Price: $699.99
Special Price $598.78
Remark 2019+ Toyota Corolla Hatchback Cat-Back Remark Exhaust w/Stainless Polished Tip PRODUCT FEATURES : - 2.5inch, 16 gauge T304 stainless steel, mandrel bent pipe - Dual center-out exhaust system - Slant cut tips for sporty style - OEM factory style exhaust hanger rod construction - High quality hand welding - Gaskets and bolts are included - Direct bolt-on easy to install - Remark license plate frame included Learn More -
Corolla Sedan Apex Carbon Catback (Quad)
Regular Price: $899.98
Special Price $749.78
Released in limited quantities, a Quad Carbon Catback is now available for your E210 sedan. No rasp, just deep, clean sound and big performance gains. Stand out from the crowd. Built with only the best parts available - including twin Vibrant Ultra Quiet Mufflers, 2.5" Stainless Steel piping and integrated flex section. Designed to fit your OEM or 2JR Midpipe (inc the 2JR Header). Fits to the OEM Corolla Midpipe or 2JR Midpipe and Header for the most power, sound and performance. NOTE: YOU MUST TRIM YOUR BUMPER TO FIT ON THE DR SIDE. REMOVE THE OEM REAR HANGER (pass side) AND RUBBER GROMMETS (dr side) IN THE FRAME RAIL. USE THE INC'D 2JR BOX HANGERS AND 10x1.25 FINE THREAD BOLTS IN THE FRAME RAILS TO HOLD THE BOX HANGERS IN PLACE. Threaded holes exist in these locations. DO NOT USE THE 10x1.5 BOLTS IN THE FRAME RAILS Features: Twin Vibrant Mufflers 2JR Quad Carbon Tips (Slash w/Logo) Stainless Piping with Flex Section E210 Sedan ONLY - fits Manual and CVT Learn More -
Progress Tech 19+ Corolla Rear Sway Bar (27mm - Adjustable)
Regular Price: $288.00
Special Price $278.98
Progress Tech 19+ Corolla Rear Sway Bar (27mm - Adjustable) Built by racers for performance driving / rally-x / auto-x and HPDEs. -Less body roll means more traction, faster cornering speeds, and increased driver confidence. -Polyurethane bushings produce crisp response on turn-in. Progress Sway bars are cold-formed in-house using our custom-built precision bending equipment. Both laser-cut and CNC bar ends are MIG welded in place using a precise fixture for an exact fit. Fits Hatch and Sedan OEM diameter = .955 in. OEM rate = 270 lbs/in. Progress diameter = 1.062 (27mm) Progress rate = 390 lbs/in. (soft) Progress rate = 440 lbs/in. (firm) Adjustment Range: 2 hole Size: 27mm Adjustment Range: None End-links Included: No All sway bars are powdercoated metallic gray. One year limited warranty Learn More -
Tein 2019+ Toyota Corolla Flex Z Coilovers (3" Drop)
Regular Price: $950.00
Special Price $899.78
Tein 2019+ Toyota Corolla Flex Z Coilovers fits hatch and sedan Up to a 3" Drop 6K Front Springs / 5.2K Rear Springs FLEX Z inherits all the features and quality of STREET FLEX but the adoption of new platform allows its price to be set at amazingly low range. FLEX Z, of course, maintains the long-favored "Made in Yokohama" quality. Ride height adjustable shock absorber, fully loaded with TEIN's comprehensive technology, is now more affordable prices than ever. https://www.tein.com/products/flex_z.html Specifications Full-Length Ride Height Adjustment Feature - Ride Height Adjustment with Little or No Change in Ride Quality Twin-Tube Structure - For Low Resiliency & Securing Sufficient Stroke Damping Force Adjustment System - 16-level Linear Damping Force Adjustment System Complete Kit with Upper Mount - Exclusively Designed Upper Mounts are Included (Except Some Models) Complete Suspension Kit of 4 Shock Absorbers & 4 Springs Learn More -
Bilstein B14 (PSS) FWD Juke Front & Rear Performance Suspension Kit (2.0 Drop)
Regular Price: $1,049.98
Special Price $998.78
Bilstein B14 (PSS) FWD Juke Front & Rear Performance Suspension Kit (2.0 Drop) Bilstein’s B14 PSS coil over kits feature threaded sections that allow you to raise or lower your vehicle within a 50mm range, giving a wide range of suspension tuning flexibility. Developed and fine-tuned to withstand rigorous track conditions, the B14 PSS coil over kits come with a set of precisely-calibrated springs to optimize ride and handling. Bilstein has set the standard in shock absorber and suspension components since they invented the first monotube gas-pressure shock in the 1950s. Developed to withstand tough track conditions Will lower ride height from 30-50mm A 50mm range of height adjustment Made with Bilstein’s renowned gas-pressurized monotube design Spring rates are carefully selected to match damper performance Coated with Triple-C-Technology for long-lasting corrosion protection Learn More -
RS-R Juke 4WD Turbo Down Sus Springs (1.4 Drop)
Regular Price: $309.98
Special Price $279.98
RS-R Juke 4WD Turbo Down Sus Springs (1.4 Drop) The RS-R Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its handling. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car both for performance and for comfort. Specifications: Approximate Drop: Front -30mm to -35mm (-1.2inch to -1.4inch) Rear -25mm to -30mm (-1.0inch to -1.2inch) Spring Rates: Front 2.87kg/mm Rear 7.07kg/mm Learn More -
RS-R Juke 2WD Turbo Down Sus Springs (1.6 Drop)
Regular Price: $309.98
Special Price $279.78
RS-R Juke 2WD Turbo Down Sus Springs (1.6 Drop) The RS-R Down Sus provides a lowered stance and improved handling to fulfill your needs to lower your car and improve its handling. Taking into consideration the factory suspension geometry, shock dampening, spring rate and ride height levels, RS-R ensures that the springs you are getting were made for your car both for performance and for comfort. Specifications: Approximate Drop: Front -30mm to -35mm (-1.2inch to -1.4inch) Rear -35mm to -40mm (-1.4inch to -1.6inch) Spring Rates: Front 2.35kg/mm Rear 5.10kg/mm Learn More -
E210 Sedan Stainless Rear Bash Bar
Regular Price: $589.00
Special Price $299.98
E210 Stainless Rear Bash Bar 2JR Stainless Steel Bash Bars are the ultimate statement for your Sedan E210 Corolla. Tig welded to perfection for the perfect look and performance. 5" Jack Points, 3/16 mild steel mounting plates. No modifications required. The black section of the OEM bumper easily removes without any cutting or trimming. Stainless Steel Tubing 3/16 Thick Mild Steel Plates Threaded Inserts for License Plate attachment points 5" Jack Point Fits only 2019+ Corollas Learn More -
Prothane 02-06 Nissan Sentra SE-R Rear Motor Mount Insert - Red
Regular Price: $45.97
Special Price $42.69
Prothane 02-06 Nissan Sentra SE-R Rear Motor Mount Insert - Red Serves as an upgrade to your old, worn-out mounts Precision-formed for solid fit Made with sturdy, superior-quality polyurethane that far outperforms rubber Provides ideal stiffness and encourages better handling and performance **You must press out your old mount and press in the Prothane** Mount is on the Rear of the crossmember Learn More -
Cusco Power Brace Under Chassis Braces Rear (Hatch)
Regular Price: $168.30
Special Price $158.78
Cusco Power Brace Under Chassis Braces Front for 2019+ Toyota Corolla Hatchback CUSCO POWER BRACE is designed to increase chassis strength, eliminate body flex, vibrations in order to optimize the vehicle's handling. Beautifully crafted and anodized in CUSCO Blue for lighting up the engine bay. It uses the existing mounting location for "bolt-on" and ensures enough ground clearance. Learn More -
Cobb Tuning - Fiesta ST Stage 1+ Package (2014-2019)
Regular Price: $1,095.00
Special Price $979.98
COBB Stage 1+ Power Package for all 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs. If you’re looking to take the performance and control of your 2014-2019 Fiesta ST to an entirely new level this COBB FOR001FI1P Stage 1+ Power Package is the perfect answer. This power package includes COBB’s Accessport V3, a Cold Air Intake System and a Rear Motor Mount. All of these components work together to give you horsepower, speed, and handling you never would have thought possible with your factory Fiesta ST. This power package will only work with North American (USDM) Domestic Market Fiesta ST's. This COBB 892001 Rear Motor Mount is made from 6061 billet aluminum with zinc hardware and is the best way to minimize engine movement, improve traction, and reduce wheel hop without a major impact to NVH. Includes: COBB Accessport V3 COBB Cold Air Intake Kit COBB Rear Motor Mount For USDM Models Learn More -
MagnaFlow 02-06 Nisssan Altima/Sentra V4 2.5L Manifold Direct Fit Catalytic Converter
Regular Price: $1,102.98
Special Price $1,058.96
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50805. With features including free-flowing mandrel-bent tubing and highly corrosion resistant, stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2002-2006 Nissan Altima and 2002-2006 Nissan Sentra, this direct-fit catalytic converter also interchanges with OE parts 14002-9J310, 14002-9J30B, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems. Learn More -
B15 Brembo StopTech Rotor Set (Front/Rear)
Regular Price: $729.98
Special Price $696.78
Fits all B15s with the Brembo Front and Rear brake kit (12" front / 11" Rear). Incs both front and rear pairs (4 rotors) Drilled and Slotted Front - 127.42083 / Rear - 127.42082 Optional: Semi Metallic / Hawk Pad Sets / Fluid / Stop Tech Brake Lines StopTech was founded in 1999 with a principal vision to manufacture high performance brake components and systems for street and track use. With racing in its DNA and a mission to become the leading manufacturer of high performance brake components and systems. Engineered to dramatically improve overall braking performance, the company is now a leader in Balanced Brake Upgrades™ for production cars with a strong presence in the SPEED World Challenge® Touring Car Series and the Grand-Am® Cup as well. Learn More -
Carbon Fiber Quad Exhaust Catback (Hatch) - In Stock
Regular Price: $1,029.99
Special Price $679.98
Carbon Fiber Quad Exhaust Catback (Hatch) 2J-Racing releases its long awaited V2 Quad Carbon Catback. with that amazing sound and performance you expect from a 2JR exhaust. No other catback on the market sounds as good as this one. Twin tail resonators paired with a single large resonator up front. All stainless 2.5" piping, hand welded to perfection then polished to a mirrored shine. Includes Quad Carbon Tips with Blue/Gold accents - laser etched 2J Logo. Fits on the OEM midpipe or 2JR Hi-Power catted midpipe. V2 Improvements - Thicker Tig Welding - Larger Vibrant Resonators Can be used with or without a rear bumper diffuser. If without a diffuser you will just need to trim your OEM fake polished tips off the bumper (see photo). . Learn More -
Sentra 04-06 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Colors add 2-3 weeks to shipping time Learn More -
Sentra 02-03 B15 2.5L Hi-Power 3" Cold Air Intake (CAI)
Regular Price: $249.98
Special Price $199.99
This is the highest HP producing intake we've ever tested. Over 8 hp more than a Nismo Cold Air intake!!. Makes Over 15 than the stock box. Refer to the dyno for Nismo vs 2JR. Can be used for supercharged or turbo applications if the customer chooses. Has a full 3" MAF section with the appropriate MAF spacing in the piping to prevent any unwanted air disturbance which would cause MAF spikes. Nissan MAFs are require a specific amount of straight pipe before and after the MAF for optimum performance. Our intake is a full mandrel bent, completely seamless, power section cold air intake. The MAF is hidden on the backside and it has just one coupler, at the TB. It fits around your Stock battery. Can be shortened by the owner for a short ram setup. Power, design and function. And for less than any other cold air intake on the market. This is the highest HP producing intake for the Spec-V. It also sounds incredible at wide open throttle! Intake includes 1. 1 piece seamless high polished piping with integrated MAF housing / power section 2. 1 dry hi-flow filter 3. 1 coupler assy with band clamps 4. 1 VC to CAI hose 5. 1 round bushing for securing the intake (w hardware) Learn More -
Eibach +19 Corolla Anti-Roll Kit Rear Bar (27mm)
Regular Price: $305.98
Special Price $294.78
Eibach +19 Corolla Anti-Roll Kit Rear Bar (27mm) Rear Sway Bar is Tubular and 2 Way-Adjustable. Performance Tuned Handling. Further Reduce Body Roll. Million-Mile Warranty Comments: I put this bar on my 2021 Nightshade with it on the softer setting. My car has about 3500 miles on it and this was an incredible upgrade. The car turns in much better and there is almost no body roll anymore. I’m looking forward to doing some track days and really putting the car through the paces. Learn More -
K&N +19 Corolla 2.0L Typhoon Short Ram Intake
Regular Price: $349.98
Special Price $319.78
K&N +19 Corolla 2.0L Typhoon Short Ram Intake Fits both the sedan and hatchback Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Learn More -
Quad Carbon Borla Stainless Catback (Hatch) V2
Regular Price: $1,049.99
Special Price $899.78
Quad Carbon Borla Stainless Catback (Hatch) V2 Finally a full 2.5" High Performance Borla Catback with Quad Carbon Tips is available for your E210 Hatch! No drone, no rasp - just clean deep Borla sound. Each kit is custom made to your rear bumper configuration. No guess work on if it will fit. You choose your rear bumper style and the fab experts at 2JRacing will make it as you requested. Specs: 2.5" Full Stainless w/ Flex Section Massive Borla XS Power Large Camber Muffler Quad Carbon Tips Hard Hanger option recommended Learn More -
2019+ Revel Touring Sport Damper Corolla Hatchback / Sedan
Regular Price: $1,372.98
Special Price $1,298.98
2019+ Revel Touring Sport Damper Corolla Hatchback / Sedan MONOTUBE DAMPER Larger piston valves and oil capacity allows for a faster reacting dampening force and efficiency through all temperature ranges. High strength and rigidity brackets ensure the driver has the utmost confidence for all driving types. The 32 way adjustable Revel Touring Sports Damper is the ideal solution for the most comfortable ride in a coilover kit while achieving an extremely low ride height and utilizing the perfect balance of dampening forces and spring rates to deliver smooth performance when it is needed. Application: 20-20 Toyota Corolla Hatchback / Sedan Spring Rates: Front: 5.5K Rear: 4.6K Learn More