Search results for '00 nissan sentra se'
-
Power Stop 11-17 Nissan Juke Rear Autospecialty Brake Kit
Regular Price: $149.98
Special Price $119.98
Power Stop 11-17 Nissan Juke Rear Autospecialty Brake Kit 2011 - 2013 Nissan Juke | 2014 - 2017 Nissan Juke [S; SL; SV; Nismo] Does not fit Nismo RS models Everything You Need in 1 Box Includes 2 OE Replacement brake rotors, one set of Z17 Evolution Plus Ceramic Brake Pads and Upgraded Installation Hardware Components are designed to match the OE performance of your brakes. Dual-Layer Rubberized Shims Z17 Evolution Clean Ride ceramic formula keeps your wheels dust and noise free Rotors use G3000 castings and are 100 percent mill balanced for stock performance and safety Includes all hardware necessary for a complete installation. Bolt-On Ready: No modifications needed to your vehicle Learn More -
ARP Stainless Steel Exhaust Stud Kit
Regular Price: $126.98
Special Price $116.78
ARP Stainless Steel Exhaust Stud Kit ARP stainless steel accessory studs can be used for exhaust systems, intake manifolds, and a number of other uses. They are made of ARP's stainless 300 and are impervious to the rust and corrosion that plague ordinary fasteners. The studs feature a unique nut starter nose and a hex broached tip, allowing them to be easily installed using an Allen wrench. Stainless steel 12-point nuts and washers are included. Give your engine a show quality look with ARP stainless steel accessory bolts. Perfect for Nissan or Toyota Exhaust and Turbo Manifolds Product: 12-Point, M10 x 1.25 1.90" Length Set of 8 Learn More -
Nissan Juke FWD Midpipe
Regular Price: $299.99
Special Price $269.78
Nissan Juke FWD Midpipe Application: Nissan Juke FWD Front Wheel Drive - CVT and Manual SV, S and RS Models Years: 2011 to 2017 Material: Stainless Steel / Polished Size: 70mm Defouler included in the midpipe for no check engine luight 2JR introduces their 70mm Full 304 Stainless Steel Midpipe for the FWD Nissan Juke. Gains over 20wtq and 15whp without a tune!! Made from 4mm thick 304 Stainless Steel for long life, corrosion resistance and strength in the harshest environment. Direct bolt on with no modification required. And no check engine light because an 02 Spacer is built in to the midpipe! Removes the second cat in the midpipe - the primary cat remains in the downpipe. No smell, no noise - and over 20wtq!! Learn More -
Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake
Regular Price: $400.89
Special Price $369.78
Injen 2007-2012 Sentra SER V-Spec 2.5L Gloss Black Cold Air Intake B16 2.5L QR25 ONLY - Manual and Auto The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System ... Learn More -
03-08 Nissan 350Z VQ35 / 17-20 Patrol Y62 VQ40 / 03-08 Infinti G35 VQ35 550cc Injector Kit
Regular Price: $574.34
Special Price $549.78
Grams 550cc Injector Kit Applications: 03-08 Nissan 350Z VQ35 / 17-20 Patrol Y62 VQ40 / 03-08 Infinti G35 VQ35 Each injector set includes dead time compensation values to help ensure consistent air/fuel ratios and optimal performance when tuning. Grams Performance Fuel Injectors are carefully tested and matched in controlled laboratory environments using state-of-the-art equipment and are subjected to rigorous dyno, street, and racetrack testing to ensure proper performance in the most extreme conditions. Features - 550cc 52lbs/hr @ 3 Bar - High-impedance design (no resistor box required) - Cold-machined tips for high-precision operation - Ultra-fast solenoids for precise fuel metering - Linear response across wide range of operating conditions - All injectors balanced, blueprinted, and matched within one percent - Compatible with all known fuels including gasoline, methanol, and ethanol - Unmatched cylinder-to-cylinder consistency and optimal idle quality Learn More -
PRE ORDER 2JR 1.5" Drop Street-Spec Circuit Lowering Springs (01-06 Sentra)
Regular Price: $179.99
Special Price $129.78
After a year of testing to refine the spring rates and ride height, 2JR introduces our own line of street performance springs. Perfect for stock shocks or pair with aftermarket shocks like KYB or Koni Yellows. Our springs are progressive rate which generates a better overall appearance while making a significant improvement in performance.
Drops 1.5" over stock, with a perfect front to rear rake. These are probably the best springs we've ever encountered for the B15. Fits all models 02-06
Spring Rates - Front = 5.5K / Rear = 5.2K or 308lbs.in / 291lbs.in
Learn More -
AWD Juke Rear Sway Bar
Regular Price: $269.98
Special Price $249.98
AWD Juke Rear Sway Bar IN STOCK Nissan Juke AWD rear mounted sway bar offers more rigidity than the factory sway bar to aid in cornering and vehicle stability. Over 35% stiffer than the factory bar which will allow for better turn-in, rotation, and overall improved stability when pushing the Nissan Juke hard through canyon roads, on the track, or even trying to get to work in the morning! By stiffening the rear suspension the chassis will be more planted and this will allow the car to rotate better through the turns and give the driver a more positive feel as he accelerates through the turn. This powder coat finish will stand the test of time and will do an excellent job of protecting the bar against corrosion, wear and tear, and keep the underside of the car looking great! Features: Rear Sway Bar Made From High-Tensile Strength Steel Reduces "Push" Feeling of Understeer Increases Rigidity to Aid in Corner and Vehicle Stability Fitment: Nissan Juke AWD Learn More -
Box Hanger - Replacement
Regular Price: $3.98
Special Price $2.49
Box Hanger - Replacement Replacement Box Hanger for Toyota and Nissan Catbacks and Side Exits. Sold as EACH. Choose 9.89 shipping at checkout Learn More -
McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V
Regular Price: $395.78
Special Price $359.78
McLeod Tuner Series Street Tuner Clutch Altima 2002-06 2.5L Sentra 2002-06 2.5L Spec V STREET POWER- The Street Power clutch kit is the newest offering in the Supremacy Line for the Sport Compact and European Markets, it's the perfect choice for street/track applications. We recommend it for cars up to 40-50%% more power(depending on part number) perfect for street cars with moderate bolt on's. Included is a high quality matched pressure plate, high torque ceramic 6 puck disc for smooth and even engagement. Our kits are complete, they come with pilot tool and throw out bearing (where applicable). If you are looking for a clutch that's a great replacement from your stock set up, the McLeod Street Power is your best option. Supremacy by McLeod Racing. Learn More -
OEM Turbocharger - Nissan Nismo RS (14411-1KC1E)
Regular Price: $987.19
Special Price $689.78
OEM Turbocharger - Nissan Nismo RS (14411-1KC1E) This turbocharger does not include hardware, gaskets, heat shields, or other additional pieces. These must be purchased separately or recycled from your old turbo. Genuine: Nissan OEM SKU: 14411-1KC1E Other Names: Turbo Charger Description: Fits Juke Juke. From 08/2011-2014 and all nismo rs. Condition: New Replaces: 14411-1KC1B, 14411-1KC1C, 14411-1KC1D Sold In Quantity: 1 Learn More -
Toyota / Nissan Spring Bolts (Pair)
Regular Price: $16.45
Special Price $15.80
Toyota / Nissan Spring Bolts (Pair) Application: Toyota E210 / GR Nissan Juke / B17 SR / Nismo Used at the header / downpipe connection (M10x1.25) - fits OEM and 2JR Header (E210/GR) and OEM Nissan Downpipe Learn More -
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake
Regular Price: $929.98
Special Price $879.98
Stage 2 - SR / Nismo Catback + Midpipe + Cold Air Intake Includes: 2JR Carbon Catback 2JR Midpipe w/defouler 2JR Full Cold Air Intake Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo)? Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. 2JR Nismo Intake relocates the filter outside of the engine compartment to deliver cool air inlet temperatures. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. Learn More -
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe
Regular Price: $798.89
Special Price $729.78
Stage 1 - SR Turbo / Nismo 304 Stainless Catback + Midpipe Includes: 2JR Carbon Catback 2JR Midpipe w/defouler Big power gains / no check engine lights / retains the factory front cat / amazing sound without the rasp. Looking for the best sound, performance and quality for your 2017-2019 Nismo Sentra SR and Nismo (1.6L Turbo) and 1.8L Non Turbo. Look no further than our hand-tig welded 2.5" stainless catback with 3.5" Carbon/Blue tip. Includes a long front resonator to remove the rasp and produce that deep, clean sound you've been searching for. It also comes with 3 hard hangers for the tail section, stainless hardware and gaskets for a complete bolt-on system. Includes Remember, the factory turbo exhaust is a mere 49mm - and highly restrictive under boost. Unless your car's potential with 2JR. Sound Clip Learn More -
Spyder Nissan 350Z 03-05 Projector Headlights Xenon DRL
Regular Price: $779.98
Special Price $565.98
Spyder Nissan 350Z 03-05 Projector Headlights Xenon DRL These headlights are designed to improve looks and visibility for your vehicle. They are made by OEM approved and ISO certified manufacturers. They are made with OEM standard quality and are designed for stock lights direct replacement. Learn More -
Kinetix Racing Velocity Intake Manifold for Nissan/Infiniti VQ35DE
Regular Price: $980.98
Special Price $899.78
Kinetix Racing Velocity Intake Manifold for Nissan/Infiniti VQ35DE We took the very popular SSV manifold and went over every aspect of its design to make the most impactful improvements. As our customers and the 350z/g35 marketplace continue to improve the power potential of their engines, the SSV needed a redesign to accommodate the the higher power output of these vehicles. The new Velocity Manifold is geared for higher flow and higher RPM power gains. This allows for even larger power gains in the many F/I vehicles out there. The new Velocity Plenum design maximizes flow to the furthest cylinders by creating a "venturi" effect. By gradually narrowing the plenum chamber, the air speed must increase to satisfy the equation of continuity. Improved flow to all cylinders also means an improved smoother A/F curve that requires less tuning in F/I applications, and near ZERO tuning in N/A vehicles. This manifold is constructed entirely of Stainless Steel, then polished out for an absolute beautiful finished product that looks as great as it performs. We chose stainless because of its great thermal properties, conducting 10X!! less heat than aluminum and eliminating much of the manifold's mass, which greatly helps with heat soak. Stainless is considerably more expensive than aluminum, but the finish shines brighter and longer. The overall manifold SAVES 10lbs of weight over stock! Precision TIG welding throughout, and a CNC cut 3/8" main flange. All mandrel bent runners and charge tube, this manifold rivals the quality of other intakes twice its price. We improved greatly upon the factory plenum designs. The factory lower plenum has many dips and turns which do not promote good airflow and creates turbulence inside your factory intake. We developed a straight shot design, eliminating the twists, turns, and obstructions. We then took each runner and also added velocity stack inlets to each individual runner for even better performance. This Manifold is a DIRECT replacement and will work with any aftermarket intake. It also allows you the ability to use the factory strut bar, or any aftermarket strut bar. We also have available an engine cover specifically designed for our manifold. We recommend an A/F tuning on Forced Induction vehicles (turbo and supercharged) after installation of the Velocity Manifold in order to maximize power and overall engine reliability. Tuning is generally not needed in Naturally Aspirated (N/A) applications. Each manifold is supplied with all necessary hardware and instructions. There is an additional port supplied which can be used for boost gauges, etc. ** Newly released Velocity Intake Manifold replaces our older SSV version with many improvements: * Velocity plenum chamber design - Equal air flow between cylinders * 12% more plenum chamber volume * 10% short intake runners for more flow and higher HP potential * Smoother A/F curve - less tuning required - more consistent power * High RPM power !! 30.5hp gains at 6800 rpm * Thicker gauge construction for higher boost - warranty up to 30psi * Ready to install - Includes all necessary hardware and gaskets for installation Learn More -
B16 Garrett 60 Trim Turbo Kit (07-12) 450hp
Regular Price: $6,298.78
Special Price $4,698.00
B16 Garrett 60 Trim Turbo Kit (07-12) 450hp Fits: 07-12 Sentra 2.5L (SE-R and SpecV) Gains: Up to 450whp 2JR is the only B16 Turbo Kit that includes the 02 Sensor ports - before the turbo, in their respective bank - for perfect driveability and tuning. No other kit offers this option. The ECU must see Bank 1 and 2 separately. Kit Includes: Garrett 60 Trim Stage 3 Journal Bearing Turbo Turbosmart WG38 Gen V Ultragate 38 7psi Blue Turbosmart BOV Vee Port Pro Bosch 850cc Injectors Stainless Downpipe Vibrant Hardware Same Side Intercooler Turbosmart Boost Gauge Wastegate spring set to 7psi for 320whp out of the box. Higher rate springs can be spec'd for up to 450hp. Contact us after purchase. NOTES: You will need to move your battery to the trunk and lower the ECU (see photo). You will also need to remove your tow hook from the crash bar to fit the FMIC. Standard kit comes with an open dump for the WG. Options include powdercoated piping / closed dump / larger injectors. You may need to relocate/remove foglights. Kit will need to be tuned after install. Contact your local tuner or 2J Learn More -
Nissan NEW Nismo RS Engine - Complete
Regular Price: $6,798.99
Special Price $5,989.98
Nismo Juke RS Engine - Complete Fits all Nissan Jukes 2011-2014 and all RS Models (any year) Available in 6MT (manual) and CVT FWD/AWD (both are Nismo Variants) OEM New from Nissan - engine is upgraded to 215 hp (160 kW) at 6,300 rpm and 210 lb⋅ft (285 N⋅m) at 3,600 rpm. Part: 10001-3yvma (Nismo RS) 6MT Manual Transmission - optional / full engine harness (24011-3Yv0a) Part: 10100-hx0aa (Nismo) CVT - optional / full engine harness (24011-bv82b) Includes turbo, all sensors, coil packs, plugs, clutch kit (6MT) or flexplate, water pump - engine is ready to be installed. SHIPPING: Select your shipping option below and choose $9.89 flat rate at checkout. Learn More -
B15 Coil Pack Harness (4)
Regular Price: $46.98
Special Price $39.17
B15 Coil Pack Harness (4) Set of 4 Coil Pack Harness for the B15. May fit other nissan models, check your application to ensure fitment. Specs: B15 2002-2006 QR25DE Learn More -
SPAL 861 CFM 12in Fan - Pull - B15 Sentra
Regular Price: $92.87
Special Price $79.87
SPAL 861 CFM 12in Fan - Pull - B15 Sentra Hands down, the best fan upgrade for your B15. Made in Italy. Clears the medusa header and provides a significant upgrade over the Mishi Fans. Will fit on Mishi Fan shrouds or you can add the shroud in the options below. Sold as EACH. Learn More -
2JR Nissan Juke Engine Intercooler Hose Kit (2011-2014 and all RS years)
Regular Price: $78.77
Special Price $69.98
IN STOCK!! Now Shipping 2JR begins their worldwide release of Juke parts with their high grade hose kit for the Gen1 (2011-2014) Juke. Fits all models. Race Proven! Designed for High Temperature (330deg), High Boost Applications. Won't swell or burst under extreme conditions . 2JR Hose Kits are made with a 4 Ply Reinforced Silicone combined with Nomex-like material to provide superior heat reduction and pressure tolerance over the OEM Nissan hoses. The 2JR Kit is a direct replacement for your OEM hoses and installs with simple hand tools. Excellent way to dress up your engine bay on the Juke. Available in multiple colors. Color Choices: Outside / Inside Red / Blue Blue / Red Application: 2JR Nissan Juke Engine Hose Kit (2011-2014 and al RS years) Ships Worldwide! Learn More