Search results for 'Heat Blanket'
-
aFe Takeda Stage-2 Pro 5R CAI Ford Focus ST 2013-2014 ONLY L4-2.0L (t) EcoBoost
Regular Price: $402.99
Special Price $400.99
Fits the 2013-2014 Focus ST Only The all new Takeda Retain Intake System produces up to 9HP and 9lbs. x ft. of torque over stock, while outflowing the factory intake by 24%. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum performance. Takeda intakes come complete with all necessary hardware. Learn More -
Mishimoto 2013-2014 (ONLY) Ford Focus ST 2.0L Performance Air Intake Kit - Polished
$413.95Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty. Learn More -
2JR Race Spec - Sentra (02-06) Stainless Braided Clutch Line
Regular Price: $44.99
Special Price $19.99
2JR Clutch Lines: are single lines made of stainless steel braided hose with a clear PVD protective coating to protect against chemicals and heat. The exact length for all Sentra models, from 2001 to 2006. Bolts and washers are included. Direct fit! Improves the clutch response by removing the soft rubber OEM hose and upgrading to braided SS. Smoke Only! Learn More -
B16 (2.5L) Denso Iridium TT IXEH20TT Spark Set (2007-2012)
Regular Price: $54.32
Special Price $42.99
DENSO Iridium TT Spark Plug:- Sold as a set of 4 For the 2007-2012 Sentra/Altima/Rogue with the QR25 The Denso Twin-Tip Technology Was Developed From Original Equipment Specification Super Ignition Plug (SIP) Design, Fusing a Fine Wire Iridium Center Electrode With a Needle Tip Platinum Ground Electrode. The Denso Iridium TT Combines The Power And Torque Of A High Performance Plug With The Endurance Of A Long Life Original Equipment Spark Plug. So You Can Drive Around The Earth Over 4 Times, With Lower Emissions And Better Fuel Economy. ThatS Over 100 Thousand Miles Of Uncompromised Performance. 0.4 mm Iridium Center Electrode: World's Smallest Diameter That Maximizes Firing Potential 0.7 mm Needle Tip Ground Electrode: Promotes Higher Spark Energy And Less Heat Quenching DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest Concentration Of Iridium Vs. Competitors For Greater Durability DENSO Patented 360 Degree Laser Welding Process: Ensuring Exceptional Quality Bond And Structural Strength With The Iridium Center Electrode DENSO Part # IXEH20TT Learn More -
2JR 2013-2014 Focus ST Cowl Induction Intake
Regular Price: $349.99
Special Price $279.98
WE KNOW IT'S A LOT - BUT PLEASE READ BEFORE ORDERING! Template for the cowl cutout - use only as a reference https://1drv.ms/u/s!AjQkUN52fS1SkYsxogJlFVCW9jLMrw Check out the full install of the 2J Racing cowl induction intake for the Focus St here: https://youtu.be/MtipNgHJUX0 Check out the complete unboxing of the NEW 2J Racing cowl induction intake for the Focus ST and RS here: https://youtu.be/zhqUlagPoRI Check out the Comparison between the NEW 2J Racing cowl induction intake and my old depo intake here: https://youtu.be/GoTbfZnQ3EI 2JR introduces the world's first and only cowl induction intake for your Focus ST. Most intakes place the air filter behind the stock fans to pull heated air directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives ambient cold air from beneath the windshield - in a very high pressure area (another benefit). NOTE - this intake IS LOUD. To us tho, it sounds amazing. Please refer to the "production photos" listed to the left of the final version of the intake. You will lose your sound symposer - you do not need a block off plate (you can just remove the tube). The 2JR Cowl intake does include the provision for the EVAP hardline. Its completely plug and play - the OEM hardline clips in to our machined fitting - we have an extension hose that connects to the cowl intake. Same for the IAT sensor - instead of the silly grommet ours is a machined fitting the sensor rotates into - just like stock. So it'll never come lose or leak. - Install time - 2 hours. A tune is not required. - In testing we saw ambient or just a deg or two below ambient during cruising and slight increases under heavy load. - To install you will need to cut the lower plastic housing under the cowl (very easy) and the upper cowl vent panel (we will provide a template for the vent panel) - you will also need to extend your IAT wires (2 of them) by 36" or purchase the optional JMS IAT Extension. All other hoses, clamps and K&N Air Filter are included in the kit. - Made in the USA for perfect fitment and quality. - Powder coating adds 15-20 days. NOTE: The intake filter sits suspended in the cowl (not resting on the floor). The was done to prevent any water from being pulled in the intake that may build up on the cowl floor. We do recommend the optional KN filter sock to help keep the filter extra dry - as the piping turns down very close the the plastic upper cowl seal at the windshield. For added security you could trim the upper cowl to act as a bit of flashing to help offset any water intrusion. In testing, we didn't incur any issues during heavy rains - but you should always maintain the highest precaution against this occurring in your neck of the woods. FINAL NOTE: JMS made for us the IAT extension harness. If you dont want to add 36" to your stock IAT harness (2 or 4 wires need to be extended) add this JMS harness in the options. Makes for a painless install. We also recommend the KN Dry filter Sock to help keep it dry. Learn More -
MR16 (1.6L) Cometic Tri Layer Metal Headgasket
Regular Price: $179.99
Special Price $149.99
Now available for all MR16 engines - Cometic Tri Layer headgasket. Provide your MR with the ultimate in protection during high boost runs with a cometic HG. Tested by 2J under the harshest conditions. Provide maximum sealing performance for today’s high output engines. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements. Custom made specifically for your MR 1.6L Engine Learn More -
Ford Fiesta ST Oil Cooler Kit
Regular Price: $635.00
Special Price $519.00
Turbocharged, high stress 4 cylinder engines like the 1.6L EcoBoost engine in the Fiesta ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-to- liquid heat exchanger, the engine can still run very hot and run the risk of overheating the engine's coolant as well. Aggressive tunes and some track miles can significantly overheat your oil and wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution for your Fiesta ST! Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was designed to bypass the stock liquid to liquid oil cooler in order to get the best possible oil temperature reduction. A new CNC center bolt and aluminum coolant bypass tube are provided to easily eliminate the stock oil cooler unit. Application specific braided stainless steel lines transfer oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 35 F (19.5 C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty. Learn More -
Brian Crower QR25 Titanium Valve Spring Retainer Set
Regular Price: $188.98
Special Price $169.78
Brian Crower QR25 Titanium Valve Spring Retainer Set 2JR Ti Retainers - full set (16) Ti-17 Alloy Extremely durable, machined to exacting tolerances and available in stock size to fit 2JR and JWT valve springs. The old saying goes; “a chain is only as strong as it’s weakest link.” This is so true of your valve train. Don’t ignore this part in your valve train set up – it can make all the competitive difference! Features: Heat treated Titanium material for maximum strength Impingement surface enhancement process 3-4 grams lighter than OEM Fits ALL QR25 engines, all years and models. Fits on stock springs, 2JR springs and JWT Springs. Uses OEM keepers Learn More -
MR16DDT (Juke/B17 Sentra/Nismo) 2JR HiPower I-Beam Rod Set
Regular Price: $629.99
Special Price $519.78
2JR rod sets for the MR16DDT 1.6L are extremely durable, lightweight and will hold over 600whp. All come with ARP rod bolts.
Our I-Beam rods are extremely lightweight made from 4340 that is designed for all high hp applications in the 1.6L.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. These exact rods are used in the MRP Insane 650whp Juke
Fits all years - Juke, Pulsar - 1.6L
Learn More -
2JR Gold Heat Reflective/ Protective Tape
Regular Price: $59.99
Special Price $39.99
2JR High Heat reflective tape - up to 40% reduction in radiant heat on intake plenums and intakes. So much so, that when tested on a ND Miata, IAT temps remained at Ambient in the engine bay! Down from over 130deg to just equal to the outside air temp. Protects firewalls and heat shielding. Constructed of highly reflective metalized polyimide film Withstands up to 675°F Reflects heat and protects sensitive engine components from high temperatures Self-adheres using a high temperature pressure sensitive adhesive 2" x 35 Feet Roll Learn More -
Sentra Spec-V 1-Step Colder Performance NGK Spark Plugs (02-06) - Full Set
Regular Price: $29.99
Special Price $24.99
For the 02-06 2.5L Nissan QR25 Designed to operate over a much wider heat range than ordinary plugs Resists carbon buildup and pre-ignition High alumina ceramics for better heat transfer and electrical insulation Solid copper core and nickel tipped electrode provide a longer plus life Patented triple gasket sealing process eliminates the possibility of combustion gas leakage Solid copper core for greater spark Longer insulator nose prevents fouling Set of 4 - INCLUDES FULL SET Learn More -
Sentra Spec-V 1-Step Colder Performance NGK Laser Iridium IX Spark Plugs (02-06) - Full Set
Regular Price: $36.72
Special Price $33.99
For the 02-06 Spec-V - 1 step colder iridium laser IX plug set! Includes ALL 4! NGK's IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast. Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark Iridium Alloy has an Extremely High Melting Point, Perfect for Today's High-Tech, High Performance Engines Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties Corrugated Ribs Prevent Flashover Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer Copper Core Aids in Heat Removal Triple Seals Prevent Leakage Learn More -
Sentra Spec-V 1-Step Colder Performance NGK Laser Iridium IX Spark Plugs (02-06) - Full Set
Regular Price: $36.72
Special Price $34.00
For the 02-06 Spec-V - 1 step colder iridium laser IX plug set! Includes ALL 4! NGK's IX Iridium Series Plugs were Designed Specifically for the Performance Enthusiast. Fine Wire Center Electrode Ensures High Durability and a Consistently Stable Spark Iridium Alloy has an Extremely High Melting Point, Perfect for Today's High-Tech, High Performance Engines Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties Corrugated Ribs Prevent Flashover Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer Copper Core Aids in Heat Removal Triple Seals Prevent Leakage Learn More -
Focus ST - Injen Short Ram Intake w/MR Tech & Heat Shield
Regular Price: $487.99
Special Price $319.99
Focus ST - Injen Short Ram Intake w/MR Tech & Heat Shield Learn More -
2JR Fiesta ST Cowl Induction Intake
Regular Price: $329.98
Special Price $259.98
For the first time ever you can add gold heat wrap tape, and custom candy colors to your order.2JR introduces the world's first and only cowl induction intake for your Fiesta ST. All other intakes place the air filter behind the stock fans to pull in heat directly into the engine (after being heated again by the compression of the turbo). 2JR places the filter inside the cowl, where it only receives cold air from beneath the windshield. NOTE - recommended for racing purposes as this intake IS LOUD. Extremely loud inside the car. You may use it on the street, but you will be listening to induction noise whenever you step on the gas. To us tho, it sounds amazing. The production intake will be one continuous pipe - without the pie cuts
Install time - 2 hours. A tune is not required.
With our 2JR race downpipe, cowl intake and 3" exhaust and tune - we put down 288wtq, consistently, run after run.
To install you will need to cut the lower plastic housing on the cowl AND extend your MAF wires. All other hoses, clamps and K&N Air Filter are included in the kit.
Made in the USA for perfect fitment and quality.
For 2016+ FiST, use the COBB PCV Intake Adapter https://www.cobbtuning.com/products/air-induction/ford-intake-adapter-fiesta-st-2016-2017
Learn More -
Mishimoto 00-06 Nissan Sentra SE-R Vspec Aluminum Fan Shroud Kit
Regular Price: $242.92
Special Price $215.95
Mishimoto Radiator Fan Shroud: Mishimoto has developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly, Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components.
Optional 2JR plug and play wiring kit. Goes from your OEM B15 harness to the Mishi Fan - makes for a quick/painless install. No cutting required! Learn More -
Cometic Tri Layer Metal Headgasket - B15 or B16
Regular Price: $159.99
Special Price $139.99
Now available! For the B15 or B16. .030" standard thickness, 89mm bore size. Custom sizes available but take several weeks to produce. Using 1mm oversize pistons, choose 90mm bore size. Provide maximum sealing performance for today’s high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flouroelastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements. Learn More -
QR25DE - ARP Head Stud Kit (all years)
Regular Price: $179.99
Special Price $159.99
Application: QR25DE - All years / Models (b15, b16, altima, rogue)Pro series cylinder head studs from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining and are rated at a whopping 200,000 psi for the 8740 material and 220,000 psi for ARP2000. ARP Pro series kits are also available with 12-point nuts, and all kits come complete with hardened parallel washers for an even load distribution and accurate torque readings.
Learn More -
B15 QR25DE- ARP Flywheel Bolt Kit
Regular Price: $59.99
Special Price $39.99
These Pro series flywheel bolt kits from ARP give you all that you need to bolt in your flywheel with confidence. They're much stronger than OEM hardware, are forged from aerospace alloy, and are heat-treated prior to thread rolling and machining. These bolts feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter for increased strength and improved flywheel register. These bolts will only fit Forged Steel Flywheels - will NOT fit aluminum flywheels (JWT, Fidanza). Will NOT fit OEM B15 Flywheels - use OEM bolts for these. Only fits Forged Steel Flywheels. Not OEM, JWT, Fidanza
Learn More -
2JR HiPower H-Beam Rod Set (700whp)
Regular Price: $469.99
Special Price $429.99
2JR rod sets for the QR25 are extremely durable, lightweight and cost not much more than the factory B16 rod. All come with ARP rod bolts.
H-beam rod out of 4340 high tensile steel for QR turbo applications, good for up to 700whp. These are over 25mm in thickness.
I-Beam rod is extremely lightweight I-beam rod from 4340 that is designed for all NA and low boost (less than 450whp) applications.
Principal Design Features AISI 4340 is a heat treatable, low alloy steel containing nickel, chromium and molybdenum. It is known for its toughness and capability of developing high strength in the heat treated condition while retaining good fatigue strength. Applications Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts. Tapered to Fit OEM / B16 and Frontier Pistons perfectly - as well as forged wiseco/je
Learn More