Search results for 'bent rear'
-
2019+ Tein Street Basis Z - Corolla Hatchback and Sedan
Regular Price: $640.00
Special Price $608.78
2019+ Tein Street Basis Z - Corolla Hatchback and Sedan Fitment Information Lowering Range: 1.0" to 3.0" Front and 1.0" to 3.0" Rear Street use superior quality made affordable. Thread-type Ride Height Adjustment. The ride height can be adjusted by moving the lower spring seat up or down. Twin-Tube System. Compared to the regular mono-tube system, twin-tube attains longer stroke with a smaller repulsive force, resulting in high ride comfort. Use OE Mounts. STREET ADVANCE Z and STREET BASIS Z use the vehicle's original upper mounts (not included in our product kit). Specs & Features Spring Rates: 280 lb Front and 263 lb Rear Fixed Damper Settings (non adjustable) Includes a full set of 4 12 Month Warranty Genuine TEIN - Made in Japan Learn More -
B16 Sentra Goodridge Brake Lines (07-12)
Regular Price: $198.77
Special Price $139.98
G-STOP SS Braided Brake Line Kit B16 Sentra Goodridge Brake Lines (07-12) 2007-2012 Fits all B16 Sentras with front and rear disk brakes, including SpecV models. Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow. *Features* * Performance Enhancement & Safety Improvement * Eliminates Sponginess Under Braking * Increases Braking Efficiency * Abrasion and Corossion Resistent Learn More -
RS-R 2019+ Toyota Corolla Hatchback/Sedan Sports-i Coilovers
Regular Price: $2,099.00
Special Price $1,978.98
Fitment Information RS-R 2019+ Toyota Corolla Hatchback/Sedan Sports-i Coilovers Fits Both Sedan and Hatchback Spring Rates (front/rear): 6.0 / 6.0 [kgf/mm] Features - Monotube hand-assembled coilover system - Urethane top mount bushings for comfort and vibration suppression - Front Radial bearing eliminate spring bind - Rubber Padding and bushings reduce creaking noise or jarring rides - 36 step dampening adjustment - Front Top plate offers 2 camber settings (Standard or flip and -1.5 degree) - Direct bolt-on easy to install Spirited weekend track drives do not have to sacrifice daily driving comfort or performance. Designed with the performance enthusiast in mind, the RS-R Sports-I coilover system provides a comfortable ride for everyday use, yet is sufficient enough for those effervescent track days. Why spend all day at the track dialing in your suspension when you should be on the track enjoying the experience. Damper and camber adjustments should not be a definitive factor, nor should you spend all day adjusting your suspension settings at the track. Drive to the track, on the track and drive home in comfort. Enjoy driving again with the RS-R Sports-I coilovers. Learn More -
RS-R 2019+ Toyota Corolla Hatchback/Sedan Down Springs (-1.2 Drop)
Regular Price: $309.99
Special Price $272.78
Fitment Information RS-R 2019+ Toyota Corolla Hatchback/Sedan Down Springs (-1.2 Drop) Fits both the sedan and hatchback Specs & Features Down: Front -1.0 inches to -1.2 inches Rear -0.8 inches to -1.0 inches Spring Rates: Front 2.90kg/mm Rear 3.89kg/mm True Japanese heritage from the JDM market Performance spring with comfort in mind Includes all 4 springs Designed to work with stock shocks True Japanese lowering springs. RS-R is one of the top aftermarket spring manufactures in Japan and is proud to bring their technology to the US. These authentic JDM lowering springs provide you with both comfort and performance while giving you the lowered stance and much improved handling characteristics that you look for in a lowering spring. RS-R takes careful consideration of the vehicle these springs were designed for to ensure the factory suspension geometry, shock dampening, spring rate and right height levels are designed for your specific vehicle to give you the best performance and control possible. Learn More -
RS-R 2019+ Toyota Corolla Hatchback/Sedan Super Down Springs (-2.0 Drop)
Regular Price: $339.00
Special Price $278.98
Fitment Information RS-R 2019+ Toyota Corolla Hatchback/Sedan Super Down Springs (-2.0 Drop) Fits Both Sedan and Hatchback Specs & Features Super Down: Front -1.8 inches to -2 inches Rear -1.8 inches to -2 inches Spring Rates: Front 2.63kg/mm Rear 4.29kg/mm True Japanese heritage from the JDM market Performance spring with comfort in mind Includes all 4 springs Designed to work with stock shocks True Japanese lowering springs. RS-R is one of the top aftermarket spring manufactures in Japan and is proud to bring their technology to the US. These authentic JDM lowering springs provide you with both comfort and performance while giving you the lowered stance and much improved handling characteristics that you look for in a lowering spring. RS-R takes careful consideration of the vehicle these springs were designed for to ensure the factory suspension geometry, shock dampening, spring rate and right height levels are designed for your specific vehicle to give you the best performance and control possible. Learn More -
Cusco Sway Bar 16mm Rear Juke - 2WD ONLY
Regular Price: $334.00
Special Price $298.78
Cusco Sway Bar 16mm Rear Juke - 2WD ONLY (FWD) Vehicle Fitment Nissan Juke - All Years Vehicle Notes 2WD - Turbo model Car Position Rear Product Notes 16mm Rear Sway Bar - Add-on Type, Bolt-on kit Solid Steel BENEFITS Increased stability while cornering as well as during high speed lane changes. Minimizes excessive shock absorber stroke to enable a sharper handling characteristic. Also enables correction of under or oversteer with proper utilization of this component. Learn More -
Eibach Pro-Kit for 2019 Toyota Corolla Hatchback
Regular Price: $350.00
Special Price $299.78
Eibach Pro-Kit for 2019 Toyota Corolla Hatchback Eibach's Pro-Kit lowering springs are the most popular springs they make—and there's a reason for that. These springs reduce fender gap to give your vehicle a lower, more aggressive stance. Plus, they help to lower the center of gravity to improve handling during acceleration, cornering, and braking. Best of all, you can lower your vehicle without having to change your shocks. Eibach Pro-Kits give you high performance handling and aggressive good looks. Drop: Hatchback Front - 1.1" Rear - .9" Learn More -
CXRacing Coilovers for B15 Sentra
Regular Price: $849.78
Special Price $729.78
CXRacing Damper CoilOver Suspension Kit for 2000-2006 NISSAN Sentra B15 Mono-Tube, Top Mount, 32 Step Damper & Ride Height Adjustable Street Sport Spring Rate: Front 8kg(447 lb/in) / Rear 6kg(335 lb/in) Optional Swift Springs Available One year Warranty* We offer one year warranty for manufacturing defective parts. Professional Installation is a must for this warranty, without a professional installation receipt, warranty is voided. Bad part must be returned for inspection for exchange new part. Highlights: -32 Step Damper Adjustable -Precise control damp valve, Operates smoothly on all road surfaces -Expansion/Suppression of shock adjustment -Height and low adjustable, Superb road holding qualities and great looks -Single Cylinder, or Mono-Tube Design, with Larger cylinder and piston design, advances driving stability and dexterity -ARTC Durability Test & Salt Spray Fog Test, Guaranteed with Top Quality Material and Long Durability Learn More -
H&R 07-12 Nissan Altima Sport Spring
Regular Price: $439.78
Special Price $329.78
Fitment Information Nissan Altima Coupe/Sedan 4 Cyl/6 Cyl (2007, 2008, 2009, 2010, 2011, 2012 ) Specs & Features Coupe: Lowers 1.2" Front and 1.2" Rear Sedan: Lowers 1.5" Front and 1.2" Rear Includes all lowering springs Works with factory shocks or aftermarket shocks that fit stock springs. H&R Sport Springs offer superb ride quality and are H&R's number one selling product. These lowering springs offer some of the best ride characteristics of any lowering spring and offer enhanced handling while giving your car just the right amount of lowering to close the fender gap. H&R Sport lowering springs lower the vehicle center of gravity and reduce body roll for incredible handling improvements. H&R Sport springs are progressive rate and work fantastic with aftermarket, factory or performance shocks. On older vehicles we do recommend to upgrade the shocks at the same time. Includes all 4 springs for a complete setup. Learn More -
2019+ Corolla Whiteline Rear Sway bar - 26mm 3 point adjustable
Regular Price: $215.99
Special Price $199.98
Whiteline 2019 Toyota Corolla Rear 26mm Heavy Duty Sway Bar Fits hatch and sedan Engineered to 'Activate More Grip', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort. Learn More -
Cobb Tuning - Fiesta ST Stage I Package (2014-2019)
Regular Price: $760.00
Special Price $759.98
Accessport / RMM / Intake Filter The Accessport V3 is the world's best selling, most flexible ECU upgrade solution for Ford. Unlock power hidden within the vehicle by replacing conservative factory settings with more aggressive calibrations. Upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. It's the last engine management solution you'll ever need. COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using propriety Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power, fuel economy and money savings! The COBB Ford Fiesta ST Rear Motor Mount is the best way to minimize engine movement, improve traction, and reduce wheel hop without major impact to NVH. Learn More -
B15 Nismo Rear Sway Bar - Hardware Only
Regular Price: $129.77
Special Price $86.98
Full Hardware and instructions kit for the B15 Nismo Rear Sway Bar. This is the original hardware from Nismo for the Nismo/2JR 25mm Rear Sway Bar. Brand new in the box. All the brackets, bushings, bolts, nuts and washers - along with instructions on setting it up properly. Learn More -
B15 Rear Hub Assembly / Bearing Set
Regular Price: $74.99
Special Price $64.79
Pair of rear hubs for the B15 - fits both the 1.8L and 2.5L B15 Sentras (2002-2006). Comes with OEM studs installed. If you want 55 or 82mm studs installed, order those separately and we'll install them for you. 2 Hubs are included Learn More -
B15 Big Rear Brake Upgrade / Brembo 11" Size
2JR introduces the first complete kit to add Brembo sized rotors 11" to your B15. This kit includes either blank/plain rear 11" rotors and new Brembo rear brake brackets or upgrade to StopTech Drilled and Slotted Rotors. You can also add ceramic rear pads. The kit works on all B15s (QG and QR) with standard brakes. FYI - StopTech rear rotors are $187.96 EACH - so this is a good deal Kit Includes 1. Pair of Rear Rotors - Either Smooth Rotors or StopTech Drilled/Slotted (optional) 2. Pair of Rear Brake Brackets to attach your current calipers and space out to fit the larger rear rotors 3. Optional Ceramic Rear Pads 4. Optional Motul 5.1 Brake Fluid Learn More -
Weapon R 09-10 Nissan 370Z V6 Twin Throttle Body Convertible Secret Weapon Intake Neo Titanium
Regular Price: $541.00
Special Price $519.99
The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other. This technology increases air volume and speed to the engine, which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminum on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence. Only Comes In Polished. 1 Million Mile Limited Warranty Open pore high density re-usable foam Over 250 applications for Car's / Trucks / SUV's. Learn More -
Weapon R 09-15 Nissan 370Z V6 Twin Throttle Body Secret Weapon Intake
Regular Price: $487.00
Special Price $425.00
The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other. This technology increases air volume and speed to the engine, which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminum on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence. Only Comes In Polished. 1 Million Mile Limited Warranty Open pore high density re-usable foam Over 250 applications for Car's / Trucks / SUV's. Learn More -
AEM 2009+ Nissan 370Z 3.7L Cold Air Intake
Regular Price: $479.99
Special Price $449.99
AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and no company on the market can tune an inlet as well as we can. We also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. Our Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Outperforms every other Cold Air system on the market * Manufactured and assembled in the USA * 50-state legal or pending legality * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit * AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life Learn More -
K&N 09-10+Nissan/Infiniti 370z/G37 V6-3.7L Typhoon Intake
Regular Price: $649.99
Special Price $629.99
The K&N 69-7078TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Nissan 370Z and Infiniti G37 models. The restrictive factory air filters and air intake housings are replaced by the K&N Typhoon air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intakes. More air means more usable power and acceleration throughout the engine's RPM range. The 69-7078TS air intake comes with dual black rubber topped K&N high-flow air filters and heat shields that install into the previous air box spaces. Air is directed through the intake tubes into the engine's throttle bodies for a guaranteed power gain. The intake tubes have an attractive silver powder-coated finish that's made to last and accommodate the factory mass air sensors and crank case vent hoses. The oversized cone shaped air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake system is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. Learn More -
aFe Twisted Steel Headers 03-06 Nissan 350Z /Infiniti G35 V6-3.5L
Regular Price: $1,064.98
Special Price $989.98
Features: •Constructed of 1-5/8in. 16-gauge 304 stainless steel primary tubing •Mandrel-bent for unrestricted flow •3-to-1 formed collectors decrease turbulence and increases exhaust velocity •Optimized Tube Lengths Improve Flow and Performance •100% hand TIG-welded construction ensures optimal stre ngth and durability Test Results •In testing; the headers produced a max gain of+9 horsepower and+12 ft. lbs. of torque verified by our in house dyno (tested on 2003 Nissan 350Z V6-3.5L with stock y-pipe) •Potential for up to+10 horsepower and+13 lbs. x ft. of torque when combined with aFe s per formance Y-Pipe (P/N 48-36104-YC) Factory Mounting Locations: These headers are a direct bolt-on installation which requires no cutting or drilling to provide a hassle-free installation. Formed Collectors: 3-to-1 formed collectors decrease turbulence and increases exhaust velocity. The result is in creased horsepower; torque and improved throttle response. Heavy Duty Flanges: 1-5/8in. Thick 1-piece flanges are used to prevent warpage to ensure a leak-free seal over the life of the vehicle. Optimized Tube Lengths: Tube lengths are optimized for true pulse control technology which improves flow and performance. aFe headers and exhaust are engineered and manufactured in our Corona; California manufacturing facility. Note: This system is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle. Learn More -
Borla 03-08 350Z True Dual Cat-Back Exhaust 2BOXES
Regular Price: $1,674.99
Special Price $1,574.99
Borla Cat-Back and Rear Section exhaust systems feature patented straight through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power; driving excitement; fuel economy; and the distinctive Borla Sound of power respected enthusiasts everywhere. Each system is built from premium 300 series austenitic stainless steel; superior to T-400 series knockoffs; to give you the absolute best in performance and durability. Ultra smooth mandrel bends ensure maximum flow and power; and precision computer controlled CNC manufacturing ensures an accurate fit. Best of all Borla stands behind every system with a Million-Mile Warranty. Just what you would expect from the worlds most experienced and most winning exhaust brad. Learn More