Search results for 'long'
-
Motul DOT 5.1 Brake Fluid
Regular Price: $19.99
Special Price $12.49
Motul DOT 5.1 Brake Fluid 100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers' recommendations. Specially designed for anti-locking brake systems (ABS). 100% synthetic. Mixes with DOT 3, 4, and 5.1 (not Dot 5). Dry boiling point: 272degC / 522degF. Wet boiling point: 185degC / 365degF. Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE. Long life fluid: The high wet boiling point (185degC / 365degF), superior to DOT 4 (155degC / 311degF mini) and DOT 3 (140degC / 284degF mini) conventional fluids, enables the use of this product for longer periods. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use. Specially designed for anti-locking brake systems (ABS): The viscosity (820 centipoises at -40degC / -40degF) lower than DOT 4 (up to 1800 cp) and DOT 3 (up to 1500 cp) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems. Perfectly neutral with seals used in braking systems. Anti-corrosion. Learn More -
OEM B15 Crossmember Bolt Set
Regular Price: $32.94
Special Price $24.99
Nissan OEM Front and Rear Crossmember bolt set. Replace your rusted bolts with new zinc plated bolts from Nissan. 2JR Delrin Crossmember Wheel Hop Aid Bushings can be added as well to the order. NOTE: Long Bolts are for the REAR crossmember. Larger Lip Delrin Crossmember Bushings are for the Rear Short Bolts are for the FRONT crossmember. Smaller Lip Delrin Crossmember Bushings are for the Front The Flat Delrin Washers go between the crossmember and the chassis. The Lip Bushing goes on the bolt with the lip facing upwards - into the crossmember Choose 9.89 Shipping Learn More -
Focus ST - Bilstein Coilover Kit - B14 PSS Monotube
Regular Price: $1,375.14
Special Price $929.99
Focus ST - Bilstein Coilover Kit - B14 PSS Monotube The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs. *The product benefits at a glance:* * Threaded body adjustable range of 20 mm * Lowering of approx. 30-50 mm at front and rear * Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions * Aluminum Spring plates and lock nuts * Surface coating using Triple-C-Technology®for long-lasting corrosion resistance * Round threads for easy adjustment * Quality sport springs made from highly durable material * Gas pressure technology * BILSTEIN monotube technology, made in Germany Learn More -
Fiesta ST - KW Coilover Kit V1 / V3
Regular Price: $1,549.00
Special Price $1,469.00
The KW Variant Coilover System is the ideal system for customers wishing to rely on the experience of our engineers for dampening yet determine their own degree of lowering. In extensive driving tests our engineers have set the dampers for the best balance between sporty driving, comfort and safety. *Features* * Optimally adjusted, sporty and comfortable dampening technology * Inox-line stainless steel technology at no extra charge * Individually height adjustable * German TUEV-tested lowering range * High-quality components for long life * Comprehensive documentation for ease of use V3 Options include: The new KW Variant 3 Coilover System is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers *Features* * Independently adjustable damping technology -rebound and compression damping * Inox-line stainless steel technology at no extra charge * Individual height adjustment * German TUEV-tested adjustment parameters * High-quality components for long life * Comprehensive documentation for ease of use * Infinitely adjustable rebound damping * 14- level adjustable compression damping * Unique, independently functioning damping power adjustment Select b/w V1 and V3 Learn More -
2JR Sentra QR25DE (02-06) Radiator and Heater Silicone Hose Kit
Regular Price: $99.99
Special Price $79.99
Upgrade your hoses to 2JR's 4 ply silicone full race hose kit for the QR25 engine (02-06 Sentra SE-R and Spec-V). These are the best hoses on the market with double layer webbing on the inside for long life and durability. Comes as a complete set of 4 hoses. 2 for the rad and two for the heater hoses. New for 2021, we made the upper hose 1" longer for those with 2JR rad brackets - as it moves the rad away from the header/engine You can use your stock hose clamps or add new worm clamps to the order. Learn More -
(02-06) QR25DE Complete Engine (Street or Race)
Regular Price: $4,200.00
Special Price $3,990.00
(02-06) QR25DE Complete Engine 2JR Fully Built QR Engines are now available. Built to your specs, for NA, High Comp or Boost - including sleeved blocks capable of +700whp. No one has built more QRs than 2J with a commitment to quality and excellence. Engines are drop shipped to your location, ready for install or have us remove and install your new engine. Head Work – Machined Head 5 Angle valve angle job New OEM valves seals Cam Buckets (clearance to spec) OEM Cam Sets Cometic Headgasket Block – Balanced and Blueprinted, Assembled with Head (Long Block – complete/assembled) OEM Piston Set 9.5-1 Compression (Thicker Ring Lands & Better Quench Pads) Block Honed 2JRacing H Beam or I Beam Forged Rod Sets ARP Rod Bolts ARP Head Bolts ACL Main and Rod Bearings New OEM Front Cover (oil pump) New Water Pump JWT BSR Kit Complete Timing Equipment (chain, guides, tensioner, and sprocket) ALL New OEM Seals, Gaskets, O-Rings and Plugs New OEM Cam and Crank Sensors NGK LFR6A-11 Plugs Learn More -
Sentra Spec-V Pulley Combo Set! Includes Long Belt - Crank and PS (02-06 QR25s)
Regular Price: $199.99
Special Price $159.98
Full Combo Kit! Includes Crank Pulley, PS Pulley and long belt.
Nets 5whp/5wtq! 2JR introduces a lightweight solid billet 6061 racing pulley that weighs 80% less than the stock pulley (5.1 lbs vs 1lb 2JR), which translates into less rotational mass and quicker revving. This is a simple bolt on for more power in less than 30mins. Fits all 2.5L Sentra B15sr
Does not fit B16s - as they have electric power steering INCLUDES NEW LONG BELT! Learn More -
2J Metal Pimp Badge, Flat
$12.992JR Metal Badge with 3M backing. Made in the USA for long life and durability. For fairly flat surfaces. We are also releasing a curved metal pimp badge for cold air intakes, piping, etc. SHIPS FREE IN US! 3.75"x1" Learn More -
2JR B15 255LPH Direct Fit Fuel Pump (2002-2006) QG & QR
Regular Price: $139.99
Special Price $79.99
2JR uses the exact same internals as the OEM Bosch Pump but we upgrade the motor armature with less turns, thicker wire, for 40% more rpm, which means more flow. Our pump is a direct drop in to our B15 Nissan canisters. No cutting or trimming is required.! All Walboro and other aftermarket fuel pumps are too long which makes for a difficult install. Direct fitment in your B15 - fits both QG and QR motors (1.8L and 2.5L) 2002-2006 ONLY Excellent Stock Replacement Pump Good for Street N/A and Turbo Builds under 350whp Compatible with E85 Also available is 340LPR pump for turbo applications Learn More -
Ford Fiesta ST High Flow Filter
$49.00COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using proprietary woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into your engine for maximum efficiency. Why not treat your car to fresh air with a COBB High Flow Filter and let it reward you with increased power and fuel economy! SHIPS FREE! Learn More -
B15 SpecV Race Header + 3" Midpipe
Regular Price: $949.00
Special Price $698.78
Long awaited Race Header for the B15 SpecV. To unlock the highest hp gains and tq, you need a header that maximizes the QRs large port sizes and torquey midrange while maximizing horsepower on the top end. Tig welded in house using only 304 stainless - no corners were cut in the development of this header. Long runner design that merges into a 4-1 with massive 2" primaries into a 3" Merge collector with a 2.75" Spike and V-Band Connection. Includes and 3" resonated midpipe. The header requires the use of aftermarket fans moved in front of the AC condenser and the 2JR Alternator Clearance Bracket. Our header will clear OEM and Aftermarket Radiators. Comes with - 3 02 Bungs - All Stainless Construction - Vband Connection to Midpipe - Stainless Flex Section in Midpipe - 3" Resonated Midpipe - Header includes the midpipe. Will bolt up to a 2.5 / 2.75 / 3.0 catback without modification (inc the Nismo) - Stainless Header Gasket and hardware - Alternator clearance bracket Learn More -
2JR Forged Chromoly Lug Nut Set (16pcs) - Nissan
Regular Price: $159.99
Special Price $69.99
2JR Releases its new line of Forged Solid Chromoly Lug Nuts for Nissan / Subaru bolt patterns (12x1.25mm) - 35mm Length, Open End, with Knurled Ends for easy grip while installing at the track or street. These are made from billet chromoly for extra long life and durability without the high cost of our Ti lugs at 1/2 the cost. Color is powdercoated black with gold 2JR logo.
Learn More
-
2JR Forged Chromoly Lug Nut - BLACK
Regular Price: $159.99
Special Price $79.99
2JR Releases its new line of Forged Solid Chromoly Lug Nuts for Nissan / Subaru bolt patterns (12x1.25mm) - 35mm Length, Open End, with Knurled Ends for easy grip while installing at the track or street. These are made from billet chromoly for extra long life and durability without the high cost of our Ti lugs at 1/2 the cost. Color is powdercoated black with gold 2JR logo.
-
Brian Crower High RPM Valve Springs - QR25DE (all models)
Regular Price: $139.98
Special Price $129.78
Brian Crower High RPM Valve Springs - QR25DE (all models) * Valvesprings Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...) for consistent pressures over long term, high rpm usage. Quality valve springs are critical in the prevention of premature valve float. * Retainers The ultimate in lightweight high performance, Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances. * Spring/Retainer Kits Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpm's and allow for greater lift camshafts for added performance and reliability. Fits all QR25DE models 2002 - 2013 ALTIMA 2005 - 2012 FRONTIER 2008 - 2012 ROGUE 2002 - 2012 SENTRA 2005 - 2006 X-TRAIL Learn More -
B15 Full-Race Solid Delrin Motor Mounts
Regular Price: $179.99
Special Price $149.99
Specially designed for the B15 Spec-V, 2JR introduces our Full Race Delrin motor mounts for the front and rear of the QR25. All of the engine's torque load gets applied to the front and rear mounts and no OEM or ES/Prothane mount can keep the motor in position like our mounts. Made from solid delrin for extra durability / long life and utilizing a tapered 2 piece design for easy install. These are the only mounts that will keep your motor in rock solid during hard acceleration. Designed for heavy street and competition use. Combo your order save an additional $10 with our Delrin Crossmember Bushings, staggered for front and rear mounts at the frame. Installs in 15min. In stock now! Learn More -
2JR TrueCarbon Rear Trunk Surround
$290.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Rear Trunk Center Cover - 1.5mm Regular Price: $290 GB Price - $205 Learn More -
2JR TrueCarbon Gauge Cluster - OEM
$235.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Gauge Cluster - OEM replacement Regular Price: $235 GB Price - $170 Learn More -
2JR TrueCarbon Top Bin Cover
$114.00Our long awaiting carbon fiber interior and exterior pieces for the sentra (all models) are HERE. Carbon offers high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion. Our pieces are combined with a plastic resin to form carbon fiber reinforced plastic which has a very high strength-to-weight ratio, and is extremely rigid and durable. The top bin cover (tbc) and rear trunk center cover (rtcc) are ultra thin and affixed using supplied 3M backing. The gauge cluster panel (gcp) and shifter console panel (scp) are OEM replacement pieces. Get in early during the production run to save your spot and get a 30% savings. EXPECTED LATE 4Q12. Full Carbon Top Bin Cover - 1.5m thick Regular Price: $85 GB Price - $65 Learn More -
2JR B16 SpecV Midpipe - 70mm Stainless
Regular Price: $249.99
Special Price $194.98
2JR Stainless 70mm Midpipe for the B16 SpecV - fits the MB16 Header as well as the stock header (or any aftermarket header for the B16 SpecV). Made from 304 Stainless Steel with a flex section for long life during hard launches at the track. Step up from the OEM 2" midpipe to a 70mm midpipe from 2JR. Learn More -
QR25 JWT CAMSHAFT SET C1 BILLET CAMS
Regular Price: $699.98
Special Price $649.98
Ultimate in cams for your QR motor. Go big with the C1s.CAMSHAFT SET QR25DE C1 BILLET CAMS, BETTER THAN THE JWT S1 CAMS ABOVE 3500 RPM WHEN USED WITH 2J RACING LONG TUBE HEADER, 3" COLLECTOR AND LOW RESTRICTION EXHAUST SYSTEM. THERE IS ANOTHER 10-15 HP POTENTIAL BEYOND THE JWT S1 CAMS FOR A COMPETITION ENGINE. C1 IS A LARGE PROFILE
FITS: ALTIMA 2002+, SENTRA 2.5L B15 and B16,
ENGINES: QR25DE,
Suggested to use Brian Crower Valve Springs Install Instructions http://www.jimwolftechnology.com/wolfpdf/CAM_ASER2-QRNC1_HEAD_CLEARANCING_INST.pdf http://www.jimwolftechnology.com/wolfpdf/CAMSHAFT_INSTALL_QR25DE_INSTRUCTIONS.pdf Learn More